Lippert Hydraulic Leveling for Ford F600 Assemblies
Leveling and Stabilization
NOTE: Component locations shown are an approximation and will vary per manufacturer's specifications.
This document outlines the key components of the Lippert hydraulic leveling and stabilization system designed for Ford F600 chassis.
System Components:
-
Front Leveling Jacks (x2)
Description: Two hydraulic jacks are mounted at the front of the chassis to provide leveling and stabilization.
-
Hydraulic Power Unit
Description: The hydraulic power unit provides the necessary hydraulic pressure to operate the leveling jacks. NOTE: The Hydraulic Power Unit may be found in various locations.
-
Touchpad Controller
Description: The electronic touchpad serves as the user interface for operating the leveling system. It features controls for extending and retracting jacks, auto-leveling, and other functions. NOTE: The Controller / Touchpad may be found near the front of the coach, normally in a protected enclosure.
-
Leveling Pump Harness
Description: This harness connects the various components of the hydraulic leveling system, including the pump, jacks, and controller.
-
Rear Leveling Jacks (x2)
Description: Two hydraulic jacks are mounted at the rear of the chassis to provide leveling and stabilization.
Important Safety Information:
CAUTION! READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING. DO NOT USE JACKS FOR TIRE REMOVAL OR UNDER-VEHICLE SERVICE.
