Air Innovations Ultrasonic Top Fill Humidifier
Model No. Al-109
Instruction Manual & Warranty Information
Introduction
Thank you for choosing the Air Innovations® Ultrasonic Top Fill Humidifier. This humidifier uses Ultrasonic Technology to create humidity instantaneously and silently, helping to improve the air quality in your home or office and erase the discomforts of dry air. Enjoy "Sleep Better, Feel Better, Look Better!" with up to 24 hours of run time.
Warranty Information
This Air Innovations® Ultrasonic Top Fill Humidifier comes with a 1-year Manufacturer's Warranty. Please register your warranty online today by scanning the QR code or visiting www.Air-Innovations.com/warranty.
If this unit becomes defective within 1-year from the date of purchase, or if you have any questions or comments regarding replacements for any of our products, please register your warranty and contact Air Innovations directly.
Contact Information:
- Toll Free: 844-600-1370 (Monday thru Friday 8:30 AM to 5:00 PM EST)
- Website: www.Air-Innovations.com/warranty
- Email: claims@air-innovations.com
- Mail: Air Innovations, Attn: Quality Assurance Dept., 2301 SW 145th Ave., Miramar, FL. 33027 USA
Warranty Conditions:
- In the first year, all repairs will be performed free of charge or the unit will be replaced.
- This warranty is not transferable and is valid only for the original purchaser.
- This warranty will be voided if the unit is subjected to unauthorized repair or impact damage.
- This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Safety Instructions
⚠️ WARNING: READ AND SAVE THESE INSTRUCTIONS: Failure to follow all the instructions may result in electrical shock, fire, or injury.
The appliance is designed for domestic use and may only be operated in accordance with these instructions.
General Warnings:
- When moving the humidifier, lift the base and water tank together. DO NOT lift only the water tank.
- DO NOT press the electric cord with heavy objects to prevent electric shock or fire hazards.
- DO NOT use a damaged plug or electric cord.
- DO NOT replace the electric cord yourself. If it is damaged, please contact a qualified technician.
- DO NOT unplug with wet hands to prevent electric shock or fire hazard.
- Shut down the humidifier before detaching the water tank.
- DO NOT move the humidifier when it is operating.
- If the base is not positioned on a flat and level surface, shut down the humidifier and adjust its position to a level surface. NEVER place on a rug, carpet, or finished floor.
- To prevent explosion or fire hazards, do not place the humidifier near flammable areas.
- DO NOT place clothing or towels on top of the humidifier. If the mist nozzle is covered or blocked, it may cause a malfunction.
- DO NOT place substances such as metal, chemicals, or detergent into the reservoir, as this will cause poor atomization.
- DO NOT operate the humidifier when there is no water inside the water tank.
- Use power voltage and frequency in accordance with the technical specifications.
- Connect the power plug properly to prevent fire hazards.
Cautions:
- Only operate when fully assembled; use only as intended and described in this manual.
- Keep out of reach of small children.
- Always insert the plug securely into the power source.
- Unplug the unit and empty the water tank and base before carrying or moving.
- NEVER leave water in the reservoir when the humidifier is not in use.
- Only unplug when the humidifier is turned off; ensure hands are dry.
- Always turn off the unit before removing, emptying, or filling the water tank.
- Perform regular maintenance of the Ultrasonic Nebulizer; NEVER scrape the Nebulizer with a hard or sharp object.
- Dry the unit completely before storage; store in a cool, dry place.
- DO NOT drop, hit, or otherwise subject this product to excessive shock.
Unpacking
Carefully remove the humidifier from the box. Follow these steps:
- Step 1: Carefully remove the humidifier from the box by pulling the base of the unit. (DO NOT take the unit out of the box by pulling the tank up).
- Step 2: Remove the remote control from the box.
- Step 3: Remove the plastic bag from the humidifier.
⚠️ WARNING: PLASTIC BAGS CAN BE DANGEROUS. TO AVOID DANGER OF SUFFOCATION, KEEP THIS BAG AWAY FROM BABIES AND CHILDREN.
Specifications
| Product Model | Power Consumption | Rating Voltage | Tank Capacity | Dimensions | Weight |
|---|---|---|---|---|---|
| Al-109 | 25W | 120V/60Hz | 4L / 1.05G | W7.83" x D7.83" x H11.81" | 2.86 Lbs. |
Parts & Contents
The humidifier unit includes the following parts:
- Directional Mist Outlet
- Top Cover
- Antimicrobial Water Tank
- Float Sensor
- Float
- Plug
- Base
- Power Button
- Remote Control
Diagram Description: The humidifier consists of a base unit containing the power button and plug, topped by an antimicrobial water tank. The tank has a float sensor. A directional mist outlet is on the top cover. A remote control is also provided.
Filling the Water Tank
Follow these steps to fill the water tank:
- Lift the cover from the tank.
- Fill the tank to the proper "Fill Level". Then replace the cover.
Diagram Description: Illustration shows lifting the humidifier's top cover and then pouring water into the tank up to the indicated fill level.
Note: Essential oils can be added directly into the tank (Step 2).
Operating Instructions
- Placement: Place the humidifier on a flat surface.
- Set Up: Remove the cover and pour clean water into the tank. Replace the cover and ensure it is properly seated. The unit can operate for over 24 hours when the tank is full.
- Turn On: Connect to the power supply (120V/60Hz). Press the power button; the indicator light will turn on, and the humidifier will start to operate.
Operating Humidifier Modes
The mist output and light settings can be adjusted using the power button or remote control:
| Action | Mist Output | Lights |
|---|---|---|
| 1st Press (Power Button) | High Mist | Power button turns bright white |
| 2nd Press | Low Mist | Power button dims / 50% mist |
| 3rd Press | High Mist | 7 colors / Power button bright |
| 4th Press | Low Mist | 7 colors / Power button dim / 50% mist |
| 5th Press | Lights Off | Lights Off |
| 6th Press | Lights Off | Lights Off |
| Long Press | Off | Off |
Diagram Description: An illustration shows the remote control with buttons labeled "Power On/Off", "Mist Setting", and "Light Control".
Remote Control Operation
- Power On/Off: Press to turn on. Lights and Mist will automatically set to high.
- Mist Setting:
- Press once for low light and mist setting to 50%.
- Press a second time and Lights/Mist will go back to high.
- Press a third time to go back to low light and mist setting to 50%.
- Light Control:
- Press to activate the 7 colors.
- Press again to turn colored lights and power button ring off.
Auto Safety-Shut Off Function
When the water tank is low on water, the humidifier stops working, and the power button flashes a red light. This is to remind the user to add water to the humidifier.
Weekly Cleaning & Care
WARNING: Before cleaning, always turn power off and unplug the unit from the outlet.
WARNING: DO NOT rinse the base under the faucet. To clean, wipe the base with a soft cloth.
WARNING: DO NOT use any solvents or aggressive cleaning agents. Keep water away from the air outlet.
WARNING: DO NOT tamper with the water sensor.
Regular maintenance is crucial for proper and efficient operation. Cleaning the tank every three days can prevent scale deposition and the growth of micro-organisms.
- Tank Cleaning: Clean the tank weekly. Remove the top, and wipe away scale with a soft cloth and rinse with clean water.
- Reservoir Cleaning: Clean the reservoir weekly. If there is any scale, wipe away with a soft cloth and rinse with clean water.
- Atomizer Cleaning: Gently remove any scale deposited on the atomizer surface with a small soft brush (not included) and rinse.
Diagram Description: Illustrations show the steps for cleaning the tank, reservoir, and atomizer. The atomizer cleaning involves a small brush.
To remove any scale or build-up in the Base or on the Ultrasonic Nebulizer, pour a 50/50 mixture of vinegar and lukewarm water onto the surface, then soak for five minutes. Note: Never submerge the base in water or any liquid.
About White Dust:
The use of high-mineral content water may cause a white mineral residue to accumulate on surfaces near the humidifier, commonly referred to as "White Dust". This is due to minerals suspended in the water and not a defect in the humidifier.
Storage
- Follow all cleaning instructions prior to storage.
- Dry all parts, including the inside of the Water Tank.
- Preferably store in its original box, in a dry place away from high temperatures.
- Follow all cleaning instructions after long periods of storage.
Troubleshooting
The table below lists common problems, their possible causes, and suggested solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Press power button, but indicator light does not light up. | • Power plug is not connected well. • Outlet not working. | • Reconnect the plug properly. • Have outlet replaced by a licensed electrician. |
| Indicator light is on and wind blows but there is no mist released. | Water tank is empty. Float sensor is not attached to water tank. | Pour water into water tank. Attach water tank to the base properly so that float sensor is connected to water tank. |
| Mist smells bad | The water in the tank is not clean. | Open tank cap and leave it in open air for 12 hours, then wash tank and refill with clean water. |
| Indicator light is on, but both wind and mist are not produced. | The water level inside water tank is too high. | Pour out water inside reservoir and close tank cap tightly. |
| Mist level remains low. | • There is deposit of scale on atomizer. • Humidifier is not warmed up yet. | • Clean atomizer and refill water tank with clean water. • Allow humidifier to warm up for 10 minutes. |
| Mist leaks out from water tank. | Water tank is not attached to base properly. | Attach water tank to base properly. |
| Water leaks from tank. | Humidifier is not on a flat surface. | Place humidifier on flat surface. |
Note: This table lists common issues for user reference. Should there be any product malfunction or breakdown, DO NOT repair it yourself. Please contact Air Innovations customer service for assistance.
Other Great Air Innovations™ Products
Explore other products from Air Innovations available at www.Air-Innovations.com.
Contact Information
For assistance, questions, or warranty claims, please contact Air Innovations:
- Toll Free: 844-600-1370 (Monday thru Friday 8:30 AM to 5:00 PM EST)
- Website: www.Air-Innovations.com/warranty
- Email: claims@air-innovations.com
- Address: Air Innovations, Attn: Quality Assurance Dept., 2301 SW 145th Ave., Miramar, FL. 33027 USA
Please reference Model No. Al-109 when contacting customer service.
