Kelvin Aurora Run
Assembly Instructions
Introduction
Thank you for purchasing an Aurora Run. We hope your dog enjoys it. The product assembles with an Allen Key. In keeping with our approach, we assume you have these, or can get them from someone you know, rather than sending you a single-use tool that ends up in the 'third drawer down' collection of ancient relics.
Rosie & the Team
Before You Start
Before you start, get a couple of things organised to make your life easy. The Aurora Run is constructed from Aluminium and is assembled with CSK Screws which require a 5mm Allen Key.
Required Tool: 5mm Allen Key
Fasteners
| Item | Description | Quantity |
|---|---|---|
| H | M6x25 Button Head Screw | x 17 |
| I | M6x12 Button Head Screw | x 5 |
| J | M6 Flat Washer | x 26 |
| K | M6 Spring Washer | x 17 |
| L | M6 Dome Nut | x 5 |
Components
| Item | Description | Quantity |
|---|---|---|
| A | Thermokennel Body | x 1 |
| B | Kennel Bracket | x 2 |
| C | Roof Panel | x 2 |
| D | Side Panel | x 2 |
| E | Timber Floor | x 1 |
| F | Alloy Frame | x 2 |
| G | Door Frame | x 1 |
| G | Door | x 1 |
Assembly Instructions
Step 1: Assemble the Roof
Align the perforations on the two Roof Panels (C) and assemble them together.
Diagram Description: Shows two Roof Panels (C) being joined, with fasteners (I, J) indicated for assembly.
Step 2: Attach Side Panels to Alloy Frames
Attach the first Side Panel (D) to an Alloy Frame (F). Use fasteners (H, J) for the bottom row only, and do not overtighten. This will be done in the next step.
Attach the second Side Panel (D) and the Door Frame (G) to the first Alloy Frame (F).
Attach the second Side Panel (D) and the Door (G) to the second Alloy Frame (F).
Diagram Description: Illustrates attaching Side Panels (D) and Door Frame (G) to Alloy Frames (F) using screws (H) and washers (J). Notes indicate to only fasten the bottom row and not overtighten initially.
Step 3: Place Assembled Roof on to the Frames
Place the assembled roof onto the constructed frames. Secure the roof to the frames using fasteners (H, J, K) and nuts (L).
Tighten all screws into the frame.
Diagram Description: Shows the assembled roof being placed on the kennel structure. Fasteners (H, J, K) and nuts (L) are indicated for securing the roof to the frames. A final instruction to tighten all screws is present.
Step 4: Place Timber Floor
Place the Timber Floor (E) into the frame on an angle, with the long boards facing upwards.
When the boards generally align with the ends, rotate them to be flat and adjust to suit the length.
Diagram Description: Depicts the Timber Floor (E) being inserted into the kennel base. It shows the floor initially angled and then adjusted to a flat position.
Contact Information
Website: https://kelvin.dog
Email: info@thermokennel.co.nz
Facebook: Kelvin Thermokennel
Instagram: kelvinthermokennel
Kelvin - The Thermokennel
