M2 Kollektion Boston 2 Coffee Table Assembly Instructions

Parts List

The following parts are included in the package:

• 1x Glass tabletop
• 1x Metal frame
• 3x Support rods
• 4x Metal legs

Hardware:

• A: Screws (x6)
• B: Screws (x12)
• C: Screw (x1)
• D: Screws (x4)
• E: Screws (x6)

Assembly Steps

Step A: Attaching the frame to the tabletop

Carefully screw parts A/E by hand into the designated holes on the frame. Do not use a cordless drill.

Visual Description: The diagram shows a glass tabletop placed on a soft surface. The metal frame is positioned on top of it. Screws A and E are shown with quantities. A checkmark indicates the correct method, and a cross with a drill indicates the incorrect method.

Step B: Securing the tabletop

Place the tabletop onto the assembled frame and secure it using part D.

Visual Description: The diagram shows the assembled frame with the tabletop being placed on top. An arrow indicates the direction of placement. Screws D are shown with quantity.

Step C: Important Safety Information

Do not sit on the table.

Do not stand on the table.

Do not lean on the table with excessive force.

Visual Description: The diagram shows three warning symbols: a person sitting on a table with a red circle and slash (prohibited), a person standing on the table with a red circle and slash (prohibited), and a person leaning on the table with a red circle and slash (prohibited).

Service and Support

For service or assistance, please refer to the contact information provided by M2 Kollektion GmbH.

Contact Information:

M2 Kollektion GmbH
In den Schafwiesen 26
71720 Oberstenfeld
Email: info@m2-kollektion.de