JONSBO C6 PC Case: User Manual and Installation Guide
Package Contents
| Image | Quantity | Description |
|---|---|---|
| [Image A] | 17 | Screw - PSU, MB, HDD / Schraube - Netzteil, MB, HDD / Vis - PSU, MB / 나사 - PSU, MB, HDD / 螺丝 - 电源,主板,HDD |
| [Image B] | 17 | Washer / Unterlegscheibe / Machine à laver / 세탁기 / 螺丝垫片 |
| [Image C] | 8 | Screw - SSD / Schraube - SSD / Vis - SSD / 나사 - SSD / 螺线 - SSD |
| [Image D] | 1 | HEX wrench socket / HEX-Steckschlüssel / Douille pour clé HEX / 육각 렌치 소켓 / 六角套筒 |
| [Image E] | 1 | Standoff / Abstand / Impasse / 대치 상태 / 铜柱 |
| [Image F] | 1 | Cable tie/Velcro / Kabelbinder/Klettverschluss / Attache-câble/Velcro / 케이블 타이/벨크로 / 魔术贴轧带 |
| [Image G] | 5 | Cable tie / Kabelbinder / Attache de câble / 케이블 타이 / 束线带 |
| [Image H] | 8 | Fan Screw / Lüfterschraube / Vis du ventilateur / 팬 나사 / 风扇螺丝 |
Connectors
The following connectors are available on the motherboard tray or front panel:
USB 3.0
Pinout: VBUS, SSRX1, SSRX2-, SSRX2+, GND, SSTX1-, SSTX1+, TX2-, TX2+, D1-, D1+, D2-, D2+, NC.
HD AUDIO
Pinout: PORT 1L, AUG GND, PORT 1R, PRESENCE, PORT 2R, SENSE1_RETURN, SENCE_SEND, PORT 2L, SENSE2_RETURN.
Power Switch & LED
Connectors for PWR SW (POWER SW) and PWR LED.
Parts Diagram
The diagram illustrates the main components of the PC case:
- 1: Top Mesh Panel / Oberes Mesh-Panel / Panneau supérieur en maille / 상단 메쉬 패널 / 顶部网板
- 2: Right Mesh Panel / Rechtes Mesh-Panel / Panneau de maillage droit / 오른쪽 메쉬 패널 / 右网板
- 3: Left Mesh Panel / Linkes Mesh-Panel / Panneau de maille gauche / 왼쪽 메쉬 패널 / 左网板
- 4: Front Mesh Panel / Front-Mesh-Panel / Panneau avant en maille / 전면 메쉬 패널 / 前网板
- 5: PCI slot Cover / Abdeckung des PCI-Steckplatzes / Couvercle de fente PCI / PCI 슬롯 커버 / PCI盖
- 6: PCI slot bracket / PCI-Slot-Blende / Support d'emplacement PCI / PCI 슬롯 브래킷 / PCI-E卡条
- 7: Main Chassis / Hauptchassis / Châssis principal / 메인 섀시 / 主体
Installation Guide
Step 1: Preparation
Before installing hardware, please remove all multi-functional brackets from the chassis.
Step 2: Accessing the Chassis Interior
Press the button on the rear panel of the chassis to open the top panel. Push the side panel and front panel outwards from the inside of the case.
Step 3: Motherboard Installation
Insert the motherboard diagonally through the front of the case into the chassis, and secure it with screws.
Step 4: Graphics Card Installation
- Remove the PCI slot cover and PCI slot brackets.
- Insert the graphics card into the MB slot and secure it with a screw.
Step 5: Fan Bracket Installation
- Install the fan brackets onto the fan.
- Insert the fan assembly into the chassis and secure it. (Supports 120mm and 140mm fans).
Step 6: Storage Device Installation
Install a 2.5" SSD or 3.5" HDD onto the multi-functional brackets. Then, mount the brackets onto the corresponding mounting points in the chassis.
Step 7: PSU Installation
- Connect all necessary cables before mounting the PSU into the case.
- Place the PSU onto the mounting area and fix it with screws.
Step 8: Mesh Panel Installation
Install the mesh panels onto the chassis.
