La Crosse Wireless Weather Station

Power Up

1. Insert 2 "AA" batteries into your Outdoor Sensor.
2. Insert 2 "AA" batteries into your Station.
3. Once the sensor is reading to your station, place it outside in a shaded location to protect it from the sun's heat.

Watch sensor mounting video: bit.ly/th_sensor_mounting

Outdoor Sensor: TX141-Bv3 or TX141-Bv4

Weather Station: WS-9160Uv2 or WS-9160Uv3 or WS-9160Uv3-BK-IT

Custom Calendar Display

Press the DATE button to change the display of the Calendar, or have it not show. Station will stay on selection.

Example: WEDNESDAY WED 10/28 12:34

Settings

1. Hold the SET button to enter the Settings Menu.
2. Use the + or - button to adjust values.
3. Press the SET button to confirm and move to next item or exit.

Settings Menu Order:

• Hello
• Language (English, Español, Français, Deutsch)
• 12/24 Hour Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date, Date/Month
• Fahrenheit/Celsius
• Thank You

Language: The language selected in this menu will control other menu items as well as your full weekday readout.

Weekday: The Weekday will set automatically when your Year, Month and Date are set.

Min/Max Records

Press the MIN/MAX button to toggle MIN/MAX readings with time/date stamp. Time and date of the record will show.

Viewing Order:

• Indoor Minimum Temperature Record
• Indoor Maximum Temperature Record
• Outdoor Minimum Temperature Record Channel 1
• Outdoor Maximum Temperature Record Channel 1

Note: If additional Temperature/Humidity sensors are added, additional presses of the MIN/MAX button will show those records as well.

Indoor Min: 3:26 AM WED 10/28

Indoor Max: 3:48 PM THU 10/29

Outdoor Min: 1:26 AM WED 1/20

Outdoor Max: 7:29 PM THU 7/29

View Humidity

Press the HUMIDITY button to view Humidity readings for a brief time. Then the station will return to temperature readings.

Optional Add-On Sensors

This station can read an add-on Rain Sensor to read in the Time Area. It can also read up to two additional Temperature Humidity Sensors.

Add Sensors

1. Install batteries into your add-on Rain or Temperature/Humidity sensor(s).
2. Note: For Temp/Humidity sensors, be sure to select different channels (2 or 3) before you insert batteries.
3. Hold the SENSOR button until the Reception Indicator starts to animate. This will start a search for your sensors.
4. Your sensor(s) should connect within the next few minutes.

View Add-on Sensors:

• Press the RAIN button to view Rain readings and history.
• Press the SENSOR button to toggle through readings from sensors 1, 2 or 3.

Note: When multiple sensors are connected you can view individual sensors or auto-scroll through all three channels. The auto-scroll indicator will lose one segment every 1 second, for 5 seconds, then switch to the next channel.

Purchase Extra Sensors

Visit lacrossetechnology.com/products/WS-9160Uv2#parts to find and purchase compatible add-on sensors.

Button Functions

We're Here to Help!

If you require additional support, get in touch with our friendly customer support team based out of La Crosse, WI.

Phone: 1.608.782.1610

Online: bit.ly/contact_techsupport

Our knowledgeable customer support team is available: Monday-Friday, 8am-6pm CST.

Join the Conversation

Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!

[Facebook] [Instagram] [Twitter]

Sensor Weather Shield

• The Sensor Weather Shield is designed to protect your outdoor sensor from rain and snow.
• This shield will offer limited protection from the sun's heat.
• Optional purchase at: bit.ly/925-1418

Specifications

Station WS-9160Uv2 or WS-9160Uv3 or WS-9160Uv3-BK-IT:

• Temperature Range: 32°F to 122°F (0°C to 50°C)
• Humidity Range: 10% - 99% RH
• Power Requirements: 2 "AA" LR6 Batteries (not included)
• Battery Life: Over 24 months with reputable batteries
• Dimensions: 3.35" L x 1.06" W x 5.91" H (8.50cm L x 2.69cm W x 15.01cm H)

Outdoor TX141-Bv3 or TX141-Bv4:

• Temperature Range: -40°F to 140°F (-40°C to 60°C)
• Transmission Range: Over 330 feet (100 meters) in open air RF 433MHz
• Power Requirements: 2 "AA" LR6 Batteries (not included)
• Battery Life: Over 24 months with reputable batteries
• Dimensions: 1.57" L x 0.79" W x 5.11" H (3.98cm L x 2.0cm W x 13.0cm H)

Care & Maintenance

Battery replacement instruction:

When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.

• Always purchase the correct size and grade of battery most suitable for the intended use.
• Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
• Clean the battery contacts and those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use. Battery leakage can cause corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment please check the internet or your local phone directory for local recycling centers and/or follow local government regulations.

Warranty Info

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship.

La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601

For Full Warranty Details, Visit: www.lacrossetechnology.com/support

Patents: www.lacrossetechnology.com/patents

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Increase separation between equipment & receiver.
• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation.

CAUTION!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modifications to this equipment. Such changes or modifications could void the user authority to operate the equipment.

All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.

CA WARNING:

This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov