Blaupunkt BLP4895 Wireless Earphones User Manual
Model: BLP4895-003
Product Overview
Image of Blaupunkt BLP4895 wireless earphones and their charging case. The charging case is white with a digital display showing battery status. Two white wireless earbuds are shown, one in the case and one beside it.
Enjoy high-quality wireless audio with the Blaupunkt BLP4895 wireless earphones.
Safety Precautions
- The device is not intended for use by persons (including children) with reduced physical, sensory or mental capacity. Persons who have not read the manual, unless they have received explanations by a person responsible for their safety and supervision should not use this unit.
- Children should be monitored to ensure that they do not play with the device.
- The device should always be readily accessible.
- The device should not be exposed to dripping or splashing water.
- No objects filled with liquids such as vases shall be placed on the device.
- Always leave a minimum distance of 10 cm around the unit to ensure sufficient ventilation.
- Open flame sources, such as candles, should not be placed on top of the device.
- The device is intended for use only in a temperate climate.
- At full volume, prolonged listening to the portable audio device may damage the user's hearing and cause hearing troubles (temporary or permanent deafness, hearing drone, tinnitus, hyperacusis).
- It is recommended not to listen to the portable audio device at high audio volume and no more than one hour per day at medium audio volume.
- CAUTION: Danger of explosion if battery is incorrectly replaced or not replaced by the same type or equivalent.
- The battery should not be exposed to excessive heat such as sunshine, fire or similar.
- Different types of batteries, new and used batteries should not be mixed.
- The battery must be installed according to the polarity.
- If the battery is worn, it must be removed from the product.
- The battery must be disposed of safely. Always use the collection bins provided (check with your dealer) to protect the environment.
- The battery can't be replaced by the user, but only by the maker of this product, the after sales department or a qualified person.
Restricted Areas
Switch the device off where the use of the device is not allowed or where there is a risk of causing interference or danger, for example on board an aircraft, near medical equipment, fuel, chemicals or blasting sites.
Road Safety
Check the current laws and regulations regarding the use of this device in the areas where you drive.
- Do not handle the device when driving.
- Concentrate fully on the driving.
- Radio signals could affect some of the car's electronic systems such as the audio stereo and alarm systems.
Interference
All wireless devices are susceptible to interference which may affect their performance. This device conforms to international standards and regulations, with a view to limiting user exposure to electromagnetic fields. Research established no link between the use of the mobile headset and any adverse effects on health if the device is used in accordance with standard practices.
Authorised Personnel
Only qualified people are authorized to install or repair this product.
Accessories
Only use batteries, chargers and other accessories which are compatible with this equipment. Do not connect incompatible products.
Children
Keep your device in a safe place, out of the reach of young children. The device contains small parts that may present a choking hazard.
Specifications
- Rated voltage
- DC 5V = 1A
- Max consumption
- 15mW
- Battery
- Li-Po 400mAh / 2x30mAh
- Sound power
- 2 x 3mW
- Max RF power
- 1.76mW
- Radio frequency
- 2402-2480MHz
- Frequency range
- 20Hz-20KHz
- Bluetooth compatible version
- 5.0
- Bluetooth connection distance
- 10m
- Music playing time
- 3 hours
- Charging time
- 2 hours
- Size
- 53 x 64 x 22mm
- Weight
- 45g
Product Presentation
Bluetooth Pairing
- Turn on the charging box switch. When charging, the digital screen will flash and the power will increase, and it will stop flashing when the display reaches "100". This indicates the battery is full.
- Open the top cover of the charging box and take out the earphones.
- To pair with other devices: Open the phone or other device Bluetooth settings, search for the Bluetooth name, and click to connect.
- Place the headset in the charging box to enter charging mode; the headset will automatically turn off.
- The headset will automatically shut down if it's not connected to a Bluetooth device for 5 minutes.
Charging
- After putting the earphones in the case, the green light will flash twice quickly. Flashing twice means the earphones are detected; then it will flash slowly for 20 seconds, indicating it is charging.
- After flashing slowly for 20 seconds, the display screen will enter sleep state and the light will turn off.
- When the earphones are fully charged, the digital screen will light up for 1 second and then turn off.
Declarations and Compliance
Market Maker Brand Licensing hereby declares that this equipment conforms to the essential requirements and other relevant provisions of Directive 2014/53/UE. The declaration of Conformity can be viewed at the following address: http://www.mms-support.net/OTA/ECD_MMBL_BLP4895-003.pdf
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately to optimize recovery and recycling of materials, and reduce the impact on human health and the environment. The [WEEE disposal symbol] on the product reminds you of your obligation to separately collect the appliance when you dispose of it.
[hearing hazard symbol] To avoid possible hearing damage, do not listen at high audio volume for long periods of time.
