General Features
- ? RGB+CCT: 16 Million colors to choose
- ?️ Color Temperature: 2700K~6500K
- ? Dimmable Saturation Control
- ? 2.4G RF Wireless Transmission Technology
- ? Signal Transmitting & Modes Synchronization
- ? Remote Control: Control distance up to 30m
- ? Smart Phone APP Control: Requires a 2.4GHz gateway
- ?️ Third-Party Voice Control Support: Requires a 2.4GHz gateway
Product Specifications
The following table details the specifications for various MiBOXER RGB+CCT LED Downlight models.
| Model No. | Power | Input Voltage | Working Temp. | CRI | PF | Color Temp. | Luminous Flux | Light Efficiency | Lifespan | Beam Angle | RF | Control Distance | Material | Product Weight | Hole Size | IP Rate |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FUT060 | 25W | AC100~240V 50/60Hz | -20~60°C | >80 | >0.5 | 2700K~6500K | 2000LM | 80LM/W | 50000 hours | 120° | 2.4GHz | 30m | Aluminum+PC Cover | 855g | Ø200-210mm | N/A |
| FUT061 | 9W | AC100~240V 50/60Hz | -20~60°C | >80 | >0.5 | 2700K~6500K | 720LM | 80LM/W | 50000 hours | 120° | 2.4GHz | 30m | Aluminum+PC Cover | 200g | Ø110~125mm | N/A |
| FUT062 | 9W | AC100~240V 50/60Hz | -20~60°C | >80 | >0.5 | 2700K~6500K | 700LM | 80LM/W | 50000 hours | 15° | 2.4GHz | 30m | Aluminum+PC Cover | 320g | Ø120~125mm | N/A |
| FUT063 | 6W | AC100~240V 50/60Hz | -20~60°C | >80 | >0.5 | 2700K~6500K | 500LM | 80LM/W | 50000 hours | 120° | 2.4GHz | 30m | Aluminum+PC Cover | 267g | Ø100mm | IP54 |
| FUT064 | 9W | AC100~240V 50/60Hz | -20~60°C | >80 | >0.5 | 2700K~6500K | 720LM | 80LM/W | 50000 hours | 120° | 2.4GHz | 30m | Aluminum+PC Cover | 240g | 105*105mm | N/A |
| FUT065 | 18W | AC100~240V 50/60Hz | -20~60°C | >80 | >0.5 | 2700K~6500K | 1500LM | 85LM/W | 50000 hours | 120° | 2.4GHz | 30m | Aluminum+PC Cover | 410g | Ø150~160mm | N/A |
| FUT066 | 12W | AC100~240V 50/60Hz | -20~60°C | >80 | >0.5 | 2700K~6500K | 1100LM | 88LM/W | 50000 hours | 120° | 2.4GHz | 30m | Aluminum+PC Cover | 320g | Ø145~150mm | N/A |
| FUT068 | 6W | AC100~240V 50/60Hz | -20~60°C | >80 | >0.5 | 2700K~6500K | 600LM | 85LM/W | 50000 hours | 120° | 2.4GHz | 30m | Aluminum+PC Cover | 160g | Ø90~95mm | N/A |
| FUT069 | 15W | AC100~240V 50/60Hz | -20~60°C | >80 | >0.5 | 2700K~6500K | 1200LM | 80LM/W | 50000 hours | 120° | 2.4GHz | 30m | Aluminum+PC Cover | 640g | Ø175~180mm | IP54 |
Installation Instructions
Follow these steps for installing the MiBOXER LED Downlights:
-
Open the appropriate hole in the ceiling. Refer to the model specifications for the correct hole size.
[Diagram 1: Illustration of a circular hole cut into a ceiling.]
-
Connect the driver (controller) properly according to the wiring diagram. Then, insert the driver and wiring into the ceiling through the hole.
[Diagram 2: Illustration showing AC power input connected to a driver unit, with wires leading to the ceiling.]
-
Push in the two spring elements on the fixture. Ensure they are deployed and anchored securely on the back of the ceiling.
[Diagram 3: Illustration showing the fixture being pushed into the ceiling hole.]
[Diagram 4: Close-up illustration of the spring clips engaging with the ceiling material.]
Remote Controls and Connectivity
These downlights are compatible with various MiBOXER remote controls and the WL-Box1 gateway (purchased separately).
Compatible Remote Controls: FUT089, FUT088, FUT092, FUT096, B8, B0, B3/T3, B4/T4.
Gateway: WL-Box1 (for App and Voice Control).
Note: Lighting can be activated after linking with a remote. For detailed instructions, please refer to the remote control manual.
Dynamic Modes
The downlights support various dynamic lighting modes. The brightness, saturation, and speed can be adjusted for these modes.
| Number | Dynamic Mode | Brightness / Saturation / Speed |
|---|---|---|
| 1 | Mardi Gras | Adjustable |
| 2 | Automatic color change | Adjustable |
| 3 | Sam | Adjustable |
| 4 | Gemstone | Adjustable |
| 5 | Twilight | Adjustable |
| 6 | American | Adjustable |
| 7 | Fat Tuesday | Adjustable |
| 8 | Party | Adjustable |
| 9 | Slow Color Splash | Adjustable |
Signal Transmitting and Modes Synchronization
Signal Transmitting: One downlight can transmit signals to another downlight within a 30m range. If there is a chain of downlights within 30m of each other, the remote control distance can effectively become limitless.
[Illustration showing signal transmission between multiple downlights in a series, with a 30m distance indicated between adjacent units.]
Modes Synchronization: Downlights can operate synchronously. When started at different times, they can be controlled by the same remote under the same dynamic mode and within a 30m distance to maintain synchronization.
Attention and Safety Information
- 1. When installing lighting fixtures, please switch off the power to ensure safety.
- 2. Please check whether the input voltage supply is in accordance with the lighting fixtures.
- 3. Non-professional users should not dismantle the lighting fixtures directly, as it may cause fire and electric shock.
- 4. Please do not use lighting fixtures around the mental area (likely meant 'magnetic' or 'electrical' interference area) and high magnetic fields, otherwise, it will badly affect the control distance.
Certifications: CE, RoHS
Origin: Made in China
