SATEL INT-GSM LTE Communication Module

Introduction

This manual details the installation and configuration of the SATEL INT-GSM LTE module. It is designed for use with INTEGRA and INTEGRA Plus alarm control panels (firmware version 1.19 or newer) and can connect directly to the panel or via an ETHM-1 Plus module (firmware version 2.07 or newer).

The module offers advanced features including SMS, CLIP, push, and e-mail notifications. SATEL aims for continuous product improvement, and current information on specifications and software changes is available on their website.

For the full text of the EU declaration of conformity, visit: www.satel.pl/ce

Key Features

• Dual SIM support for 2G and 4G networks.
• Receives incoming messages and calls via the active SIM card.
• Supports remote checking of SIM card balance and validity.
• Advanced 192-bit key-based encryption for cellular data.
• Reporting events to two monitoring stations via cellular network (data and SMS paths).
• Event notifications via SMS, CLIP, and push notifications to the INTEGRA CONTROL application.
• Remote control of the alarm system using SMS, CLIP, GUARDX program, and INTEGRA CONTROL application.
• Module firmware can be updated remotely via cellular network or directly via RS-232 port.
• Can be connected to the alarm control panel or the ETHM-1 Plus module.

Important Notes

• Installation should be performed by qualified personnel.
• Read the manual carefully before installation to avoid malfunctions or damage.
• Disconnect power before making any electrical connections.
• Unauthorized modifications may void the warranty.
• The module should be installed indoors in areas with normal air humidity.
• Avoid installing the module near electrical installations to prevent interference.

Support and Resources

For the latest information and support, please visit the SATEL support website: https://support.satel.pl