Monster Smart Illuminessence Prism 3D LED Art Panels

GETTING STARTED

Thank you for choosing the Prism 3D LED Art Panels by Monster Smart Illuminessence. This Quick Start Guide will help you with setup and installation of your device.

WHAT'S IN THE BOX

• 4 x Prism LED panels
• 4 x Prism mounting brackets with 3M Command damage-free adhesive (preinstalled on each panel)
• 4 x Prism connectors
• 1 x Prism controller
• 1 x Power adapter (12V 3A, 6ft/1.8m cord)
• 1 x Quick Start Guide
• 1 x Design Guide

WHAT DO YOU NEED?

• Cellphone or tablet with Android 6.0 or higher / iOS 10 or higher
• Wi-Fi router with an internet connection
• Wi-Fi 2.4GHz 802.11n

Before setup, make sure your phone or tablet is connected to the 2.4GHz Wi-Fi network that your Prism will be placed on. You may also need to turn on location to find nearby devices.

TIP: Do you know your Wi-Fi network name and password? Write it down now if it's hard to remember.

ANYTHING ELSE?

If you really want to be precise during installation, you can use a level, but it's not required.

TIP: Save these instructions for future reference.

SETUP

STEP 1: COMPLETE SETUP BEFORE INSTALLATION

Remove your Prism panels and all components from the box. Note that the mounting bracket and adhesive tape will be preinstalled on each panel.

Diagram Description: A Prism panel is shown from the front and back. The back view highlights the mounting bracket with damage-free 3M adhesive, three connector slots, and a directional marker indicating the LED pattern direction.

STEP 2: Download the MONSTER SMART app

Download the MONSTER SMART app from the App Store [App Store] (for iPhone) or Google Play Store [Google Play] (for Android phones).

STEP 3: Connect to Wi-Fi and Create Account

Make sure your phone or tablet is successfully connected to the 2.4GHz Wi-Fi network that your Prism will be placed on. Open the MONSTER SMART app and create an account by following the on-screen instructions.

STEP 4: Pair the Controller

It is recommended to pair Prism in a location close to your router BEFORE installation. Panels do not need to be connected to the controller to pair.

Plug the power adapter into the bottom of the controller and connect the other end to a powered wall outlet. The LED indicator will begin blinking rapidly when it has entered pairing mode and is ready to pair. (Any connected panels will blink as well.)

Pairing Modes:

• EZ MODE - RAPIDLY BLINKING LED (default): EZ Mode is the default mode for quick and easy pairing setup.
• AP MODE - SLOWLY BLINKING LED: Access Point Mode is a secondary setup that can help connect to mixed networks. Follow the on-screen step-by-step instructions.

Press and hold the power button for 5-6 seconds to enter pairing mode or change between pairing modes.

Diagram Description: A screenshot shows the Monster Smart app's 'Add Device' screen, with an option for 'Lighting (Wi-Fi)'. Another screenshot shows a Wi-Fi password entry screen, specifying that only 2.4GHz networks are supported.

Note: Monster Smart devices only work on a 2.4GHz Wi-Fi network. Many newer home Wi-Fi networks are mixed networks that are set to 5GHz by default (e.g., AT&T, Verizon) and you may need to use AP pairing mode to connect. If you still have difficulty, contact your Internet Service Provider for assistance with 2.4GHz network setup.

NOTE: At any point during pairing mode, you can unplug and reconnect the power to cancel pairing and operate the product without Wi-Fi. Advanced features will not be available.

INSTALLATION

STEP 1: Plan Your Design

Before installing anything, try out different shapes and patterns with your panels on the floor or a large table to decide what you would like to create! Consult the Design Guide for ideas.

Diagram Description: Illustrations show various geometric patterns that can be created with the Prism panels, suggesting users experiment with shapes on the floor before wall mounting.

IMPORTANT:

• Plan to install your Prism near enough to a power outlet.
• Place the controller on the left side of your pattern on the RED end of one connector.
• To ensure all panels light up, make sure all the connectors always point the GREEN side AWAY from the controller.

DESIGN TIP: Pointing the directional markers on the back of each panel towards or away from each other will create different lighting effects when panels are combined, but you can easily change this after installation!

STEP 2: Mount the First Panel

First, clean the mounting surface with rubbing alcohol and let dry. When you're ready to start, peel off the adhesive backing from one Prism panel, position the panel on the wall where you would like to begin your pattern, and press gently on the center.

Diagram Description: A diagram shows how to peel the adhesive backing from a panel and press it gently onto the wall. A note indicates not to attach to wallpaper, brick, ceiling, or floor. A removal tab is visible on the bracket.

NOTE: Do not attach this product to wallpaper, brick, the ceiling, or the floor. If desired, you can use a level to help align and place this first panel.

STEP 3: Secure the Mounting Bracket

Remove the panel, leaving the bracket in place on the wall. Press firmly on the bracket for 10 seconds to ensure a strong hold.

Diagram Description: A diagram illustrates pressing firmly on the mounted bracket for 10 seconds to ensure a strong hold. A removal tab is shown for future uninstallation.

STEP 4: Attach Connectors

Attach connectors to your first panel: attach one connector for the controller unit with the RED side out, and any additional connectors as desired to build your pattern with the GREEN sides out. Make sure to insert each connector fully into the slot.

Diagram Description: A diagram shows how to attach connectors. One connector is shown with the red side facing outwards for the controller, and others with the green side facing outwards for connecting to panels. A tip states only one green side should connect to a panel at a time.

TIP: Only one green side should ever be connected to any one panel at a time.

STEP 5: Attach the First Panel

With connectors installed, return your first panel to the wall by centering it over the mounting bracket so it snaps into place.

Diagram Description: A diagram shows a panel being reattached to the wall bracket, aligning it over the bracket. A note emphasizes checking the directional marker and the red/green connector orientation.

NOTE: Ensure the directional marker is pointing in the desired direction for your pattern. Ensure the RED connector is at the left side of the panel and that any other connectors are GREEN.

STEP 6: Build Your Pattern

Build out your Prism pattern by repeating these steps with more panels and connectors, moving away from the controller.

Diagram Description: A diagram illustrates building out the pattern by connecting more panels. It shows attaching a new panel to an existing green connector and pressing the bracket. It also shows saving a red connector for the controller.

STEPS:

• A. Peel off the adhesive backing on a new panel.
• B. Place the new panel on the wall over an open GREEN connector.
• C. Remove the panel and press on the bracket for 10 seconds.
• D. Attach more connectors with the GREEN side out and replace the panel.
• E. Make sure all connections are secure.

NOTE: Once additional panels have been installed, take extra care to hold down neighboring panels when removing one. Always ensure all connections are secure.

STEP 7: Connect the Controller

Once your pattern is complete, plug the power adapter into the controller and attach the controller to the open RED connector on the panel in the bottom left corner of your pattern.

STEP 8: Power On

Plug it in and you're done! Your Prism is now setup, installed, and ready to use. Remember, you can always easily remove a panel to rotate the directional marker or add more connectors and panels from add-on kits to change or expand your design.

ENJOY!

TROUBLESHOOTING

HAVING TROUBLE WITH SETUP?

Don't return this product to the retailer, we're here to help. Please call for customer support: 866-246-2008

Q: Why is my device failing to connect to my Wi-Fi network?

A1: Make sure your phone or tablet is successfully connected to the 2.4GHz Wi-Fi network that your device will be placed on.

A2: You may first need to enable and allow location services on your phone or tablet to find nearby devices.

A3: If your Wi-Fi network is a mixed 2.4GHz/5GHz network, try using AP pairing mode for better results.

A4: If you still have issues with your mixed network, you may need to access your router settings and/or call your Internet Service Provider to create a separate 2.4GHz network.

Q: None of my panels are lighting up, what should I do?

A1: Check that the power adapter is connected securely both to the controller and to a powered outlet. The LED indicator should illuminate if it is powered and paired to Wi-Fi.

A2: On the first panel, ensure that the controller is on the RED side of the connector and any panels are on the GREEN sides.

Q: Why are only some of my panels not lighting up?

A1: To ensure all panels light up, make sure all the connectors always point the GREEN side AWAY from the controller.

A2: If you've just added a panel, try turning Prism off and on again.

Q: What if the LED colors don't line up between panels?

A1: Pointing the directional arrows on the back of each panel towards or away from each other will create different lighting effects when panels are combined. Try rotating some panels.

NOTE: Take care to hold down neighboring panels when removing one. Always ensure all connections are secure.

Q: I've added add-on kits, why are the LEDs flickering?

A1: 1 Prism power kit can run up to 8 x Prism panels (1 x Starter Kit + 2 x Add-on Packs). Adding more than 8 x panels will require grouping in an additional power kit to maintain normal operation.

For other frequently asked questions please visit our website at www.monsterilluminessence.com

HOW TO USE

CONTROLS

Your Prism 3D LED Art Panels can be easily controlled by the controller, using the MONSTER SMART app to access advanced and customizable lighting effects, or by using a compatible voice assistant product for hands-free operation (see page 11).

Diagram Description: A diagram shows the Prism controller with labels for various functions: SETTINGS ADJUST +/-, CHANGE BETWEEN WHITE SHADES, CHANGE BETWEEN COLORS, CHANGE BETWEEN PRESET SCENES, MODE SELECT, and POWER AND PAIRING.

CONTROLLER FEATURES:

• SETTINGS ADJUST +/-: Adjust brightness (white and color) and scene speed.
• CHANGE BETWEEN WHITE SHADES: Options include cool white, warm white, soft white.
• CHANGE BETWEEN COLORS: Options include red, orange, yellow, green, cyan, blue, purple, pink.
• CHANGE BETWEEN PRESET SCENES: Access 8 advanced scenes, 8 solid scenes, and up to 4 custom scenes (requires Wi-Fi pairing and app).
• MODE SELECT: Choose between white mode, color mode, and scene mode.
• POWER AND PAIRING: Press for on/off; press and hold for pair/reset.

NOTE: One controller can run up to 8 x Prism panels. Adding more than 8 x panels will require an additional controller and power kit to maintain normal operation.

APP CONTROL: CUSTOM SCENES

The [MONSTER SMART app] gives you full control over all the functions of the Prism, as well as the ability to edit preset scenes and create your own custom scenes. Below are some of the custom scene features for Prism:

Diagram Description: Screenshots from the Monster Smart app's 'Custom Scenes' feature. These show options to add/edit a scene thumbnail, name, color sets (with sliders for brightness, saturation, color), pattern selection, speed adjustment, and saving the scene.

• PICTURE: Add or edit your scene thumbnail.
• NAME: Add or edit your scene name.
• COLOR SETS: Choose from 8 preset color sets or add your own colors and arrange and adjust them as you wish. Includes individual color adjustments (Brightness 0% = 'off' color, Saturation 0% = white color).
• MODE: Choose between 3 color changing modes: Fade, Flash, and Music Reactive (activates built-in mic).
• PATTERN: Choose between 9 patterns that determine the direction the LED light effects will travel.
• SPEED: Adjust the color transition speed.
• SAVE: Submit and save your scene!

VOICE CONTROL OPTIONAL

[WORKS WITH Alexa]

AMAZON VOICE CONTROL SETUP

Make sure your Amazon Alexa device is installed and setup.

1. Open the Alexa app and go to Skills in the menu.
2. Search for and choose MONSTER SMART.
3. Enable the Skill and authorize your account using your login information. Use the same login information that you used to create your Monster Smart account.

Diagram Description: Screenshots guide users through setting up Amazon Alexa. They show navigating the Alexa app to 'Skills & Games', searching for 'Monster Smart', enabling the skill, and linking accounts. A final screenshot shows example voice commands.

At any time, go to the Alexa app to set nicknames and rooms for your devices. You can also rename devices in the Monster Smart app.

Using the name Prism, or the name you assigned your Prism, you can ask Alexa to control your device, just say "Alexa," and ask: "Turn on my Prism", "Set my Prism to blue", "Set my Prism to 50% brightness", and more!

GOOGLE VOICE CONTROL SETUP

Make sure your Google Assistant device is installed and setup.

1. Open the Google Home app, go to the Home menu, and tap the [+] button.
2. Click "Set up device".
3. Click "Have something already set up?".
4. Search for and choose MONSTER SMART and authorize your account using your login information. Use the same login information that you used to create your Monster Smart account.

Diagram Description: Screenshots guide users through setting up Google Assistant. They show the Google Home app, adding a device, and linking services.

At any time, go to the Google Home app to set nicknames and rooms for your devices. You can also rename devices in the Monster Smart app.

Using the name Prism, or the name you assigned your Prism, you can ask your Google Assistant to control your device, just say "Hey Google" and say: "Turn on my Prism", "Set my Prism to blue", "Set my Prism to 50% brightness", and more!

SIRI VOICE CONTROL SETUP

Requires iPhone running iOS 12 or later.

1. Open the MONSTER SMART app and go to the "Smart" menu, tap the [+] button to create a new Tap To Run Smart Scene.
2. Tap "launch Tap To Run" and fill out the information.
3. Once your Smart Scene is created and saved, click the button that appears at the bottom of the screen that says "Add to Siri" to open the list of options.
4. Select your new Tap To Run Smart Scene from the list and click "Add to Siri".
5. Create a custom phrase to say to Siri to run your Smart Scene (this can be any verbal command).

Diagram Description: Screenshots guide users through setting up Siri. They show creating a 'Tap To Run' smart scene in the Monster Smart app and adding a custom phrase to Siri.

Now Siri can use your voice and custom verbal command to turn your device on or off, activate your favorite lighting pattern, adjust Prism at the same time as your other smart devices, or whatever you've set up as your Tap To Run Smart Scene.

NOTES

WARRANTY

1 Year Limited Warranty - Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, this warranty is null and void.

SAFETY

Keep these instructions.

• Do not drop, puncture, or disassemble this product.
• Do not install this product in any way other than what is outlined in this guide.
• Do not attach this product to the ceiling or to the floor.
• Do not install this product on unpainted brick, uneven/bumpy surfaces, or wallpaper.
• Do not use this product in wet or very humid environments or expose to dripping or splashing liquids of any kind.
• Do not immerse in water.
• Avoid long exposure to direct sunlight, which may cause damage.
• Do not use this product in small, enclosed locations that could limit the flow of air or trap excess heat.
• Do not expose this product to open flames.
• Do not use the product in a strong magnetic field.
• Do not use this product for emergency lighting/exits.
• Do not allow small children to operate, modify, or install this device unsupervised.
• Use a clean, soft cloth to clean - do not use any corrosive cleaners/oils to clean.
• For indoor use only.

PRODUCT INFORMATION

MONSTER XTREAM PRISM | Model: MLB7-1034-RGB | Input: 12VDC 3A | PATENT PENDING

FCC ID: 2AHAS-MLB71034 | IC: 26069-MLB71034 | HVIN: MLB7-1034-RGB

CE FC

FCC Compliance

This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement: To satisfy FCC's RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended.

ISEDC Warning

This device complies with Innovation, Science, and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm.

Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux limites d'intensité de champ RF, les utilisateurs peuvent sur l'exposition aux radiofréquences et la conformité and compliance d'acquérir les informations correspondantes. La distance minimale du corps à utiliser le dispositif est de 20cm.

1 YEAR LIMITED WARRANTY

Jem Accessories, Inc. Limited Warranty Policy for Monster Smart Products Last Updated: March 27, 2020. This limited warranty contains important information about your rights and obligations, as well as limitations and exclusions that may apply to you.

1. WHAT THIS LIMITED WARRANTY COVERS; PERIOD OF COVERAGE: Jem Accessories, Inc. warrants to the owner of the enclosed Monster Smart-branded product that it will be free from defects in materials and workmanship for a period of one year. Repair or replacement may be made with a new or refurbished product or components, at Jem Accessories's sole discretion. If the Product fails to conform to this Limited Warranty during the Warranty Period, Jem Accessories will, at its sole discretion, either (a) repair or replace any defective Product or component; with proof of purchase using original documentation.

2. TOTAL SATISFACTION RETURN POLICY: If you are the original purchaser of the Product and you are not satisfied with this Product for any reason, you may return it in its original condition to the retailer in compliance with the retailer's return policy.

3. WARRANTY CONDITIONS; HOW TO GET SERVICE: Before making a claim under this Limited Warranty, the owner of the Product must (a) visit monsterilluminessence.com/support during the Warranty Period to provide notice of your warranty claim and describe the alleged failure, and (b) comply with Jem Accessories's return shipping instructions. Jem Accessories will have no warranty obligations with respect to a returned Product if it determines, at its reasonable discretion after examination of the returned Product, that the Product is an Ineligible Product.

14. WHAT THIS LIMITED WARRANTY DOES NOT COVER: This Limited Warranty does not cover Products marked as "sample" or "Not for Sale", or sold "AS IS"; Products that have been subject to modifications, alterations, tampering, or improper maintenance or repairs; handling, storage, installation, testing, or use not in accordance with any quick start guide, manual or other instructions; abuse or misuse; breakdowns, fluctuations, or interruptions in electric power or the telecommunications network; or Acts of God. It also does not cover any non-Jem Accessories branded hardware products, consumable parts, or software.

15. DISCLAIMER OF WARRANTIES: Jem Accessories disclaims all express, implied, and statutory warranties and conditions, including implied warranties of merchantability and fitness for a particular purpose. The duration of any applicable implied warranties or conditions is limited to the duration of this limited warranty.

6. LIMITATION OF DAMAGES: In no event will Jem Accessories be liable for any consequential, incidental, exemplary, or special damages, including any damages for lost data or lost profits, arising from or relating to this limited warranty or the product. Jem Accessories's total cumulative liability will not exceed the amount actually paid for the product by the original purchaser.

7. LIMITATION OF LIABILITY: Jem Accessories is not liable for any loss, liability, or damages resulting from your use of the product information, services, or product, including damage to wiring, fixtures, electricity, home, product, product peripherals, computer, mobile device, and all other items and pets in your home.

8. YOUR RIGHTS AND THIS LIMITED WARRANTY: This Limited Warranty gives you specific legal rights. You may also have other legal rights that vary by state, province, or jurisdiction.

If you need to start a warranty claim for your Monster Smart device, please reach out to Customer Support by emailing customerservice@monsterilluminessence.com or calling 866-246-2008. Please allow 7-10 business days to process warranty claims. Customers located outside of U.S. will be responsible for all shipping costs.