1. Description of the Heater
The Mill Instant convection heater is presented in various views (A-E), showcasing its design, including integrated legs for floor placement.
2. Parts
The heater includes the following components:
- Heater legs (Part A)
- Screws (Part B)
3. Assembly
Assembly involves attaching the heater legs to the main body of the unit:
- Attach the heater legs (Part A) to the base of the heater.
- Secure the legs using the provided screws (Part B).
- The illustrations show a step-by-step process of connecting the legs to the heater body.
4. Control Panel: Mechanical Thermostat
The mechanical thermostat control panel features a temperature adjustment dial and operational buttons.
Components include:
- 1: Temperature adjustment dial
- 2: Power/Mode button
5. Control Panel: Electronic Thermostat
The electronic thermostat control panels offer digital displays and button controls for precise temperature management. Models shown include SG2000LED, SG2000GLASS, and CO2200LEDMAX.
SG2000LED
Display: SG2000LED
Controls:
- 1: Power button
- 2: Up button
- 3: Down button
- 4: Mode button
- 5: Display screen
- 6: Wi-Fi indicator
- 7: Heating indicator
SG2000GLASS
Display: SG2000GLASS
Controls:
- 1: Power button
- 2: Up button
- 3: Down button
- 4: Mode button
- 5: Display screen
- 6: Wi-Fi indicator
- 7: Heating indicator
CO2200LEDMAX
Display: CO2200LEDMAX
Controls:
- 1: Power button
- 2: Up button
- 3: Down button
- 4: Mode button
- 5: Display screen
- 6: Wi-Fi indicator
- 7: Heating indicator
6. Temperature Calibration
To calibrate the temperature, follow these steps:
- Press and hold the Power button (1) and the Up button (2) simultaneously for 5 seconds.
- The display will show a heat symbol [heat symbol].
- Press the Power button (1) again.
- Wait for 15 seconds.
- The display will show the current temperature.
7. Resetting the Heater
To reset the heater to factory settings:
- Press and hold the Power button (1) and the Down button (3) simultaneously for 15 seconds.
- The heater will restart.
