Choetech HUB-M48 7-in-1 USB-C Hub & Laptop Stand
User Manual
Package List
1 x 7-in-1 USB-C HUB & Laptop Stand, 1 User Manual
Specifications
| Model | Interface | Description |
|---|---|---|
| HUB-M48 | 1 x USB-C/F | 1 x USB-C Female, 1 x USB-C PD, 1x USB-C Data, 1 x SD, 1x TF, 2 x USB-A, 1 x HDMI |
| 1 x USB-C | Connect to the computer | |
| 1 x USB-C | Support PD3.0, 20/5A (Max) Charging | |
| 1 x USB-C | Transmission speed: GEN 1, 5Gbps | |
| 1 x SD/TF | Support USB3.0 data reading simultaneously | |
| 2 x USB-A | Transmission speed: Support USB3.1, GEN 1, 5Gbps (Max) | |
| 1 x HDMI | Support 4K 3840*2160 @30Hz (Max) Support 1080P@60Hz and downward compatibility |
How to Use
- Adjust to Stand Angle.
- Set up your USB-C device.
A diagram shows the laptop stand being adjusted to different angles. Another diagram shows a laptop placed on the stand.
- Connect the USB-C connector with your USB-C device.
- Connect the specific port with the peripheral devices that you need, as shown in the picture above.
A connection diagram illustrates the following connections: - Projector, Monitor, HDTV connected via HDMI. - USB-C connected to a PD Charger and Computer. - USB 3.1 x 2 ports connected to a Keyboard, U Flash Drive, and Mouse. - SD card slot.
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.
CE marking ?
