Choetech T319 Wireless Charger
Thank you for purchasing the Choetech T319 wireless charger. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions.
Contact Information
For any questions or comments about the device, please contact the customer line:
- Website: www.alza.co.uk/kontakt
- Phone: +44 (0)203 514 4411
Importer: Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz
Instructions
The following diagram illustrates the connection process:
[Diagram showing a wireless charger pad connected to a USB-C cable, which is then connected to a power adapter plugged into a wall socket. The charger pad is labeled '2' and the cable/adapter is labeled '1'.]
- Connect the charger.
- Charge the Apple Watch.
Parameters
| Interface | USB-C |
|---|---|
| Input | 5V 1A (Max) |
| Output | 5W (Max) |
Attentions
- Do not disassemble the device without permission.
- To ensure the best performance, please tear off the protective film on the magnetic charging module before charging.
- For standard charging, original chargers of MFi certified chargers are recommended.
- When charging, the Apple Watch will display the charging icon.
- Please note that the magnetic charger is larger than the original, and the regular bracket for the original magnetic charger will not match.
- Using or storing the magnetic suction wireless charging at high temperatures or in a humid environment is forbidden.
EU Declaration of Conformity
This equipment is in compliance with the essential requirements and other relevant provisions of EU directives.
[CE Mark]
