LEGO Creator 3-in-1 Building Instructions
This document provides instructions for building a LEGO Creator 3-in-1 model, specifically a race car.
Model Overview
The primary model depicted is a red and black race car with yellow accents and silver detailing. It features four wheels, a spoiler, and a cockpit area.
Parts List and Assembly Steps
The following sections detail the assembly process, showing the required LEGO bricks and how they connect at each step.
-
Step 1
Begin by connecting a circular grey piece with four studs to a rectangular grey piece with two studs.
Visual Description: A circular grey LEGO piece with four studs is shown above a rectangular grey LEGO piece with two studs. Green arrows indicate they should be joined together.
-
Step 2
Attach two red 2x4 plates to the sides of the grey structure created in Step 1.
Visual Description: Two red LEGO plates, each with 2x4 studs, are shown being attached to the sides of the previously assembled grey component.
-
Step 3
Add a grey 2x2 brick with a 1x2 brick attached to its side onto the central grey piece.
Visual Description: A grey 2x2 brick is shown with a grey 1x2 brick attached to its side. This combined piece is to be placed on top of the central grey structure.
-
Step 4
Connect two red 2x4 plates to the sides of the grey structure, extending outwards.
Visual Description: Two red 2x4 plates are shown being attached to the sides of the grey central assembly.
-
Step 5
Attach a grey 2x2 brick with a 1x2 brick attached to its side onto the central grey piece.
Visual Description: A grey 2x2 brick with an attached grey 1x2 brick is placed on the central grey assembly.
-
Step 6
Place a black 2x4 plate onto the grey brick.
Visual Description: A black 2x4 plate is shown being placed on top of the grey 2x2 brick.
-
Step 7
Attach two red 2x4 plates to the sides of the structure.
Visual Description: Two red 2x4 plates are attached to the sides of the main body of the car.
-
Step 8
Add two yellow 1x2 sloped bricks and one red 1x2 sloped brick.
Visual Description: Two yellow 1x2 sloped bricks and one red 1x2 sloped brick are shown, indicating where they should be placed on the model.
-
Step 9
Attach a grey 1x2 brick with two studs on top to the central grey piece.
Visual Description: A grey 1x2 brick with two studs on top is shown being attached to the central grey assembly.
-
Step 10
Connect a black 2x4 plate to the grey brick.
Visual Description: A black 2x4 plate is placed on top of the grey 2x2 brick.
-
Step 11
Attach two red 2x4 plates to the sides of the structure.
Visual Description: Two red 2x4 plates are attached to the sides of the car's body.
-
Step 12
Add a grey 1x2 brick with two studs on top to the central grey piece.
Visual Description: A grey 1x2 brick with two studs on top is attached to the central grey assembly.
-
Step 13
Attach two red 2x4 plates to the sides of the structure.
Visual Description: Two red 2x4 plates are attached to the sides of the car's body.
-
Step 14
Connect two red 1x2 sloped bricks and one grey 1x2 brick with two studs on top.
Visual Description: Two red 1x2 sloped bricks and one grey 1x2 brick with two studs on top are shown being attached to the model.
-
Step 15
Attach a grey 1x2 brick with two studs on top to the central grey piece.
Visual Description: A grey 1x2 brick with two studs on top is attached to the central grey assembly.
-
Step 16
Add two black 1x2 bricks with angled tops and two yellow 1x4 plates.
Visual Description: Two black 1x2 bricks with angled tops and two yellow 1x4 plates are shown for attachment.
-
Step 17
Attach a black 1x2 sloped brick with a cutout and two black wheels.
Visual Description: A black 1x2 sloped brick with a cutout and two black wheels are shown being attached to the model.
-
Step 18
Add a black 1x4 sloped brick with a cutout and two black wheels.
Visual Description: A black 1x4 sloped brick with a cutout and two black wheels are shown being attached to the model.
Final Model
The completed model is a sleek race car, primarily red with black and yellow accents, featuring a spoiler and detailed wheels.
Visual Description: A finished LEGO race car is displayed, showcasing its design and color scheme.
