LEGO Creator 3-in-1 Race Car Building Instructions

Product Overview

This document provides the building instructions for the LEGO Creator 3-in-1 Race Car set, model number 30691. The set allows for three different building possibilities, with these instructions focusing on the primary race car model.

The LEGO logo and name are trademarks of the LEGO Group.

Building Steps

1. Take one red 2x4 brick and one black 2x4 brick. Place the black brick on top of the red brick.

2. Take one black 2x6 brick.

3. Take two 1x2 grey bricks with axle holes and one grey 2x2 brick with axle holes. Attach them to the black 2x6 brick as shown.

4. Take one red 2x4 brick. Attach it to the structure from step 3.

5. Take two grey 1x2 bricks with axle holes. Attach them to the sides of the structure.

6. Take two grey 1x2 bricks with axle holes and two grey 1x1 bricks with axle holes. Attach them to the structure.

7. Take one grey 1x2 brick with axle holes. Attach it to the top of the structure.

8. Take two grey 1x1 bricks with axle holes. Attach them to the structure.

9. Take two grey 1x1 bricks with axle holes and two grey 1x1 round bricks. Attach them to the structure.

10. Take two grey 1x2 bricks with axle holes and two grey 1x1 bricks with axle holes. Attach them to the structure.

11. Take two grey 1x2 bricks with axle holes. Attach them to the structure.

12. Take two red 1x2 bricks. Attach them to the structure.

13. Take one grey 1x2 brick with axle holes. Attach it to the structure.

14. Take one black 1x4 brick. Attach it to the structure.

15. Take two red 1x1 bricks and one black 1x2 brick. Attach them to the structure.

16. Take one black 1x4 brick. Attach it to the structure.

17. Take one yellow 1x4 brick. Attach it to the structure.

18. Take two yellow 1x2 bricks. Attach them to the structure.

19. Take two red 1x1 bricks. Attach them to the structure.

20. Take four black wheel assemblies (tire and rim). Attach them to the designated points on the underside of the car.

Final Model Description

The completed LEGO Creator 3-in-1 Race Car is a vibrant red and black vehicle with yellow accents. It features four sturdy wheels, a detailed front grille, and a spoiler at the rear, resembling a fast and agile racing machine.