Your Name as Your Email | Hover Realnames
LED Lighting Systems, Linear LED Lights, LED transformers | Q-Tran
Installation Guide for Q-TRAN models including: QTM-eLED-60, QTM-eLED-120, QTM-eLED-180, QTM-eLED-100, QTM-eLED-200, QTM-eLED-300, QTM-eLED-60 LED Power Supply, LED Power Supply, Power Supply, Supply
QTM-eLED TW | LED Power Supply | 100-300W at 24VDC | Q-Tran
File Info : application/pdf, 3 Pages, 565.40KB
DocumentDocumentINSTALLATION LED POWER SUPPLY - QTM-eLED+TW Housing 14.5" 8.00" ISOMETRIC VIEW 4.00" Mounting Options 4.00" 8.00" BOTTOM VIEW 0.875" KNOCKOUT 9X (FOR 1/2" FITTINGS) 1/4" Rod Thru Hole 3/8" Rod Thru Hole Double Sided Key Hole NOTE: Bracket can also be mounted (Top & Bottom) for Vertical Mounts. RECESSED SURFACE HORIZONTAL SURFACE SPACING 9.5" O.C. VERTICAL 19" O.C. More Units can be stacked More Units can be stacked 9.5" O.C. RECESSED MOUNT R(HODorSizUoSnPtaEl)NSION R(OVeDrtSicUaSl)PENSION SURFACE STACKING ROD SUSPENSION Vertical 9.5" O.C. 16" O.C. More Units can be stacked Plenum Door Required Horizontal NOTE: Rods not included. © 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-08-23-23 INSTALLATION LED POWER SUPPLY - QTM-eLED+TW Driver with Dimming Module QTM-eLED+TW : for interior RD RD RD BL LED DRIVER (120 - 277V) T0u-n1a0bVle WDhIiMte-MMoOdDule LED DRIVER (120 - 277V) +24V Cool- Warm- 0-10V 0-10V This wire can be pink or grey GND NEU HOT GND SECONDARY PRIMARY Warm Cool +24V *By others. INTENSITY CCT This wire can be pink or grey GND HOT NEU © 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-08-23-23 INSTALLATION LED POWER SUPPLY - QTM-eLED+TW CSA Requirements · Suitable for indoor use · This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. · Wear rubber shoes and work on a sturdy wooden or fiberglass ladder. · This power supply is to be installed in a location where it is not likely to be contacted by non-electricians. · To avoid a hazard to children, account for all parts and destroy all packaging materials. QTM-eLED INPUT VOLTAGE 120V OUTPUT VOLTAGE 12V 24V CONTROL TYPE 0-10V Model QTM-eLED-60 QTM-eLED-120 QTM-eLED-180 QTM-eLED-100 QTM-eLED-200 QTM-eLED-300 Input Voltage (V) 120 120 120 120 120 120 Input Current (A) 0.60 1.20 1.80 0.95 1.90 2.85 Frequency Nominal Output Nominal Output Voltage (VDC) Wattage (W) 50/60 12 60 50/60 12 120 50/60 12 180 50/60 24 100 50/60 24 200 50/60 24 300 WIRE CONNECTION WITHOUT DIMMER Red = +24V Blue = -24V WWITIRHE CODNINMECMTIOENR WITH DIMMER Red = +24V White = -24V Type Ic Recessed, Inherently Protected Type IC ENCASTRE, PROTECTION INHÉRENTE For Supply Connections Use Wire Rated For At Least 60 C. Suitable For Damp Locations CONVIENT AUX EMPLACEMENTS HUMIDES 50/60 Cycle Class 1 or Class 2 This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. LOW VOLTAGE LIGHTING SYSTEM CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE D'INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAÎT BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHÉRENTS. Q-Tran, Inc. CLASS: 3425 - 15 3425 - 95 Q-TRAN, INC. MILFORD, CT U.S.A. WARNING: RISK OF FIRE. IF INSTALLATION INVOLVES RUNNING WIRE THROUGH A (203) 367-8777 WWW.Q-TRAN.COM BUILDING STRUCTURE, SPECIAL WIRING METHODS ARE NEEDED. CONSULT A QUALIFIED ELECTRICIAN QTM-eLED INPUT VOLTAGE 120V - 277V OUTPUT VOLTAGE 12V 24V CONTROL TYPE 0-10V Model QTM-eLED-60 QTM-eLED-120 QTM-eLED-180 QTM-eLED-100 QTM-eLED-200 QTM-eLED-300 Input Voltage (V) 120 / 277 120 / 277 120 / 277 120 / 277 120 / 277 120 / 277 Input Current (A) 0.60 / 0.29 1.20 / 0.58 1.80 / 0.87 0.95 / 0.40 1.90 / 0.80 2.85 / 1.20 Frequency Nominal Output Nominal Output Voltage (VDC) Wattage (W) 50/60 12 60 50/60 12 120 50/60 12 180 50/60 24 100 50/60 24 200 50/60 24 300 WIRE CONNECTION WITHOUT DIMMER Red = +24V Blue = -24V WWITIRHE CODNINMECMTIOENR WITH DIMMER Red = +24V White = -24V Type Ic Recessed, Inherently Protected For Supply Connections Use Wire Rated For At Least 60 C. Suitable For Damp Locations 50/60 Cycle Class 1 or Class 2 This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. WARNING: RISK OF FIRE. IF INSTALLATION INVOLVES RUNNING WIRE THROUGH A BUILDING STRUCTURE, SPECIAL WIRING METHODS ARE NEEDED. CONSULT A QUALIFIED ELECTRICIAN LOW VOLTAGE LIGHTING SYSTEM Q-Tran, Inc. CLASS: 3425 - 15 3425 - 95 Q-TRAN, INC. MILFORD, CT U.S.A. (203) 367-8777 WWW.Q-TRAN.COM © 2023 Q-Tran Inc. All rights reserved | 155 Hill St. Milford, CT 06460 | 203-367-8777 | sales@q-tran.com | www.q-tran.com Specification subject to change. Rev-08-23-23