Zebronics PixaPlay 73 Smart LED Projector

Introduction

Dear Customer,

Thank you for purchasing the ZEB-Pixaplay 73 Smart LED Projector. Please read the user manual carefully before usage and save it for future reference.

Important Notes:

• To provide a stable power supply, kindly use the cable provided with the product and connect to an (AC100V-240V) power source.
• Avoid the self-disassembly of the product as it results in the failure of warranty.
• Avoid looking directly at the projector lens while it is active.
• Make sure that the projector's air vents are not blocked while in use. The device must be kept in a well-ventilated surrounding for proper functioning.
• It is recommended to power OFF the projector after a continuous usage of 6 hours.
• Place the projector away from water or other liquids. Avoid water accumulation and ensure good ventilation.
• In case of enquiry regarding the projector, email at enquiry@zebronics.com or contact at 044 40000004.

Features

• Home Theater Projectors for Movies, TV & Gaming etc.
• Built-in Speaker
• Wide Compatibility
• 200° Tilt Mechanism
• Auto Keystone Adaptation * (*For vertical adjustment only)
• Remote Control
• Miracast
• iOS Screen mirroring
• Dual band Connectivity (2.4GHz & 5GHz)
• Supports 4K
• APP Support

Specifications

Package Contents

• Projector: 1 U
• Remote Control: 1 U
• Power cord: 1 U
• HDMI Cable: 1 U
• Cotton Swab Pack: 1 U
• QR Code Guide: 1 U

Product Description

The projector features a cylindrical body with a stand. On the front/side, there is an ON/OFF button, a VENT grille, a Headset jack, an HDMI port, and a USB port. The rear has a POWER button. The top has a Focus Knob, and the front has an Air inlet grille.

Remote Control

The remote control has the following buttons:

1. ON/OFF
2. MUTE
3. MIRACAST
4. SWITCH TO MOUSE CONTROL
5. DIRECTIONS (Up, Down, Left, Right)
6. AIRPIN
7. OK
8. RETURN
9. MENU
10. HOME
11. VOL+/-

Setting Up the Projector

1. Plug the Power cord into the projector's AC power input. Insert the other end of the power cord into a standard wall power socket. Ensure the wall socket is turned on to supply power.
2. Please place the projector on a flat surface to ensure proper projection. Turn the projector On by pressing the power button either on the panel or on the remote.
3. The projector should be aligned straight to the screen / the place of projection.

Installation Alignment:

Diagrams illustrating projector setup: The first diagram shows incorrect installation with the projector angled upwards, resulting in a distorted screen. The second diagram shows correct installation with the projector perpendicular to the screen, producing a rectangular image. The third diagram shows incorrect installation with the projector angled downwards, also causing a distorted screen.

Projection Distance and Size

The recommended projector screen size is 101-330 cm. For an improved viewing experience, it is recommended to use the projector in a room that provides as much darkness as possible.

Projection Distance Guide:

A diagram illustrates projection distances and screen sizes. From left to right, a projector is shown projecting onto screens of approximately 101 cm at 1 meter, 150 cm at 2 meters, 250 cm at 3 meters, and 330 cm at 4 meters.

Focus Adjustment

Use the focus knob to adjust the focus of the projector. Note: Auto focus feature is not available; the product features only manual focus.

Keystone Adjustment

The 4-point keystone can be adjusted in Projection settings.

Android Home and Settings

Once the projector is turned on, it leads to the home screen. The home screen displays apps, Settings Menu, Network, Projector, General, My Device, and Input.

Android Home Screen Layout:

A screenshot of the projector's Android home screen displays the date and time (Thu 4/20/23 12:01 AM) and various app icons arranged in a grid. These include AirPin(PRO), Calculator, TEST, FileManager, Gallery, Pictures Test, Local Update, Music, Netflix, Play Store, and YouTube. A 'Settings' menu is also visible.

Settings Menu:

Switch to the homepage and open the settings main menu. This menu contains sub-menus like Network, Projector, Display, Sound, Upgrade, Bluetooth, General, and Info.

Settings Menu Icons:

The settings menu includes icons for: Networking Setting, Bluetooth Setting, Language Setting, Other Setting, Projection Setting, Audio Setting, Date And Time Setting, and About device.

Connections

USB Connection:

Plug the USB to the port present at the rear side of the projector. Navigate to the USB tab present in the homepage.

Diagrams show connection ports on the projector. One diagram highlights the USB Drive port on the rear.

HDMI Connection:

Once the HDMI is connected to the projector, you will need to select the specific signal source as input. After connecting, the content played on the source will be streamed on the projector.

Another diagram highlights the HDMI Connector port on the rear.

Bluetooth Settings

1. Go to Settings > Bluetooth settings.
2. Turn the Bluetooth Connection On and search for nearby Bluetooth devices.
3. Choose the desired Bluetooth device to pair and connect.

Network Settings

1. Go to Settings > Network settings.
2. Set WIFI to "ON".
3. Select the desired network and input the password to connect to the network.