Zebronics PixaPlay 68 Smart LED Projector

Introduction

Dear Customer,

Thank you for purchasing the ZEB-Pixaplay 68 Smart LED Projector. Please read the user manual carefully before usage and save it for future reference.

Important Notes:

• To provide a stable power supply, kindly use the cable provided with the product and connect to a (AC 100-240V, 50/60 Hz) power source.
• Avoid the self-disassembly of the product as it results in the failure of Warranty.
• Avoid looking directly at the projector lens while it is active.
• Make sure that the projector's air vents are not blocked while in use. The device must be kept in a well ventilated surrounding for proper functioning.
• It is recommended to power OFF the projector after a continuous usage of 6 hours.
• Place the projector away from water or other liquids. Avoid water accumulation and ensure good ventilation.
• In case of enquiry regarding the projector, email at enquiry@zebronics.com or contact 04440000004.

Features

• Home Theater Projectors for Movies, TV & Gaming etc.
• Built-in Speaker
• Wide Compatibility
• Auto Focus Technology
• Auto Keystone Adaptation
• Auto Obstacle detection & Auto Screen Fit
• Remote Control (BT + IR)
• Miracast
• iOS Screen mirroring
• Dual band Connectivity (2.4GHz & 5GHz)
• FHD 1080p (Native)
• APP Support
• Dolby Audio

Specifications

Screen size: 114 - 508cm

Native Resolution: 1920x1080 FHD

Max. Supported Resolution: 1080p (Max.)

Android version: 12

RAM: 2GB

Core Processor: Quad Core Processor

Storage (ROM): 64 GB

Wi-Fi Connectivity: Dual band Connectivity (2.4GHz & 5GHz)

Bluetooth Version: v5.1

Display technology: LED

Lifespan: 30,000h

Brightness: 20000 lumens

Contrast ratio: 1000:1

Projection Distance: 1.5m - 6 m

Port Interface: AUX OUT, USB x 2, HDMI x 2, RJ45 x 1

Video file format: AVI, Mp4, MKV, FLV, MOV, 3G2, MPG, VOB, SWF, TS

Input Voltage: AC 100-240V, 50/60Hz

Product Dimension (W x D x H): 27 x 25 x 15.5 cm

Package Dimension (W x D x H): 32.5 x 30.7 x 24 cm

Net. weight: 3.6Kg

County of origin: PRC

Package Contents

• Projector: 1 Unit
• Remote Control: 1 Unit
• Power Cord: 1 Unit
• Cotton Swab Pack: 1 Unit
• HDMI Cable: 1 Unit
• QR Code Guide: 1 Unit

Product Description

Front View: Shows the projector lens on the left and an IR sensor on the right.

Rear View: Displays various ports including Power Input, IR, HDMI 1, HDMI 2, USB 1, USB 2, and a Headphone Jack. Also shows a Power Button.

Remote Control

The remote control includes the following buttons:

• Power button: Turn on/off
• Input button: Choose to enter HDMI 1, HDMI 2, or USB.
• Mouse mode switching button: Allows cursor control with directional buttons and confirmation with OK.
• Setting button: Accesses the setting screen.
• Direction buttons: Up, Down, Left, Right, and OK for navigation.
• Return button: Returns to the last step.
• Home button: Short press to return to the home page.
• Menu button: Enters the setting page.
• Focus button (F-, F+): Adjusts focal distance.
• Auto Focus button: One-touch auto focus.
• Volume button (+/-): Adjusts volume up or down.
• Mute button: Mutes the audio.

Setting up the Projector

1. Connect the power cord to the socket of the projector and turn it ON.
2. Before turning ON, ensure the projector is placed on a flat surface for proper projection. Then, press the power button or turn it on using the remote.
3. Align the projector as shown in the diagrams to ensure proper projection. Incorrect installation can result in a distorted image (left-right small or right-left small). Correct installation produces a rectangular image.

Projection Distance & Size

The following table illustrates projection distance and corresponding screen sizes:

• 1.35m: 42"
• 1.55m: 50"
• 2.0m: 67"
• 5.8m: 200"

Projection Modes

The projector supports the following projection modes:

• Front Table: Standard placement on a table facing the screen.
• Front Ceiling: Mounted on the ceiling facing the screen.
• Rear Table: Placed on a table facing a reflective surface (e.g., a mirror) or the back of a screen.
• Rear Ceiling: Mounted on the ceiling facing a reflective surface or the back of a screen.

Input Source

1. HDMI Interface:

Connect an HDMI cable from your device to the projector's HDMI port. The projector's interface will display options to select HDMI 1 or HDMI 2 as the input source.

2. USB Interface:

Connect a USB drive to the projector's USB port. The File Manager will allow access to Video, Image, Audio, and Document files stored on the USB drive or internal storage.

Bluetooth Settings

• Navigate to Settings and select Bluetooth.
• Turn on Bluetooth Connection and search for nearby Bluetooth devices.
• Select the correct Bluetooth device to connect.

Speaker Mode: In the apps, Speaker Mode is available. Select a Bluetooth speaker on your source device, and the projector will act as a Bluetooth speaker.

Connection Example: A smartphone (Redmi 13C 5G) is shown connecting to a Bluetooth speaker (YG_5023D0). Long press the [OK] button to disconnect.

Projection Settings

1. Auto Focus:

By default, the auto focus mode is enabled, allowing the projector to quickly detect and adjust to the optimal clarity of the screen when turned on.

2. Electronic Focus:

Press the F+ and F- buttons on the remote to manually adjust the picture clarity.

3. Auto Keystone:

The auto keystone correction feature automatically adjusts the image to ensure it appears rectangular, even if the projector is angled or not positioned directly in front of the screen. This is particularly helpful when the projector is set up on a table or mounted at an angle.

4. Miracast Connection:

First Step: Choose the corresponding Miracast methods from the on-screen menu (e.g., Rotacast, Video, News, Music, Sports, Lifestyle, My apps).

Second Step: Operate according to the on-screen text prompts. For iOS devices, open Control Center, tap Screen Mirroring, and select the projector (e.g., BirdCast-0323). For Android devices, go to settings, access display settings or screen-mirroring, and select the Miracast receiver (e.g., RotaCast-32f4).

5. Digital Zoom:

• Go to Settings > Projection Settings.
• Choose Digital Zoom.
• Press the Down button (V) to Zoom out (100% to 70%).
• Press the Up button (A) to Zoom in (70% to 100%).

Use the [ ] buttons to adjust screen size and [MENU] to reset settings.

Wi-Fi Connections

1. Wi-Fi Connection:

• Go to Homepage > Settings > WIFI Setting.
• Turn WIFI ON and search the WIFI list by selecting "Add WIFI".
• Select your WIFI network and enter the password to connect.

2. Wired Connection:

• Go to Homepage > Setup > Network > Wired Setting > Ethernet Setting > Auto IP (On).
• Insert the wired cable into the LAN interface of the projector to use the wired network.

3. Hotspot Connection:

• Go to Homepage > Settings > Network > Hotspot.
• Configure Hotspot Switch, Hotspot Name, Type of Security (WPA/WPA2), and Hotspot Password.