Olight Marauder 2 User Manual
Product Overview
Thank you for purchasing this Olight product. Please read this manual carefully before use and keep it for future reference!
In the Box
- Marauder 2 Flashlight
- USB-C Charging Cable
- Power Adapter
- Lanyard
Components
- Floodlight LEDs
- Spotlight LED
- Rotary Knob Brightness Controller
- ON/OFF Switch
- Brightness Level Indicator
- Light Form Toggle
- Tail Cap
- Charging Port
- Dustproof Port Cover
- Battery Level Indicator
- Low Battery Indicator
- Charging Status Indicator
- Lanyard Hole
Specifications
General: 800m beam distance, 160,000cd, IPX8 rating. Dimensions: (L)5.51"*(D)3.11" / (L)140*(D)79mm. Weight: 26.5oz/750g.
All specifications are test results based on ANSI/NEMA FL1-2009 Standard, performed using the included battery. Maximum output brightness decreases as battery voltage decreases. The charging port is waterproof and dust-shielded by a cover.
Floodlight Modes
Mode | Brightness | Runtime | Battery Level |
---|---|---|---|
L7 | 14,000 lumens | 5min (100%) / 23% (140min) / 11% (45min) | 100% / 23% / 11% |
L6 | 6,400 lumens | 13min (100%) / 50% (120min) / 25% (40min) / 13% (22min) | 100% / 50% / 25% / 13% |
L5 | 3,200 lumens | 90min (100%) / 50% (90min) / 25% (10min) / 13% (10min) / 6% (70min) | 100% / 50% / 25% / 13% / 6% |
L4 | 1600 lumens | 7h30min (100%) | 100% |
L3 | 800 lumens | 13h (100%) | 100% |
L2 | 400 lumens | 22h (100%) | 100% |
L1 | 200 lumens | 40h (100%) | 100% |
Spotlight Modes
Mode | Brightness | Runtime | Battery Level |
---|---|---|---|
L7 | 850 lumens | 20min (100%) / 76% (170min) / 59% (85min) / 35% (25min) / 24% (15min) / 15% (85min) | 100% / 76% / 59% / 35% / 24% / 15% |
L6 | 650 lumens | 115min (100%) / 77% (180min) / 46% (20min) / 31% (20min) / 15% (85min) | 100% / 77% / 46% / 31% / 15% |
L5 | 500 lumens | 360min (100%) / 60% (25min) / 40% (15min) / 20% (80min) / 10% (110min) | 100% / 60% / 40% / 20% / 10% |
L4 | 300 lumens | 11h40min (100%) | 100% |
L3 | 200 lumens | 19h (100%) | 100% |
L2 | 100 lumens | 31h (100%) | 100% |
L1 | 50 lumens | 59h (100%) | 100% |
Features of Charging & Reverse Charging
Charging: The flashlight features a USB-C charging port. Compatible protocols include QC2.0, QC3.0, PD2.0, PD3.0, APPLE, DCP, AFC. Supported charging voltage/current: 5V3A, 9V3A, 12V2.5A, 15V2A, 20V1.5A. Time to fully charge (with PD 30W): 2.5 hours.
Charging Status Indicator: Solid Red: Charging. Solid Green: Charging Completed.
Reverse Charging (Power Bank Function): The USB-C port can charge other devices up to 30W. The charging status indicator will flash green when reverse charging. This function stops when the battery level is below 5% or the floodlight is on at Level 7. Warning: The flashlight can only charge one device at a time. Do not use with multi-port USB hubs or charge multiple devices simultaneously.
Before First Use
Before your first use, please remove the protective film on the lens. The flashlight arrives in lockout mode for shipping purposes. To unlock, rotate the knob switch quickly over 90 degrees. The surrounding indicators will light up for 3 seconds upon successful unlocking.
Charging: Twist the tail cap counterclockwise to open the charging port cover. Connect the flashlight to a power adapter via the provided USB-C charging cable. The charging status indicator will glow red while charging and turn green when fully charged. After charging, remove the cable and twist the tail cap clockwise to close the port cover.
How to Operate
Unlock Rotary Knob Switch
The knob switch locks automatically after 30 seconds of inactivity when the flashlight is off. Rotate the knob switch 90 degrees to unlock. Indicators will light up for 3 seconds.
ON/OFF
Single-click the unlocked knob switch to turn the flashlight on/off. It will return to the previously selected brightness level (Level 7 is not memorized; Levels 5 or 6 are memorized for 10 minutes before reverting to Level 4).
Change Brightness Level
When the flashlight is on, rotate the knob switch clockwise to increase brightness or counterclockwise to decrease it.
Select Light Form
Flip the toggle switch up for spotlight or down for floodlight. The brightness level remains unchanged. Indicators will light up for 3 seconds when the toggle switch is flipped.
Turbo Mode
Double-click the unlocked knob switch quickly to activate Turbo (Level 7). Double-click again quickly to return to Level 4 brightness.
Strobe Mode
Triple-click the unlocked knob switch quickly to activate Strobe. In Strobe mode, a single click turns off the flashlight. To exit Strobe, press and hold or rotate the knob switch.
Safety Warnings
DANGER
- DO NOT shine the light directly into human eyes. This may cause temporary blindness or permanent damage.
- Keep out of reach of children.
- DO NOT cover the flashlight when it is on. Heat buildup may cause nearby objects to burn or result in disasters.
- DO NOT immerse the flashlight in seawater or other corrosive media, as it will enter and damage the charging port.
WARNING
- DO NOT activate high mode repeatedly under high temperature to prevent overheating and user injury.
- Overheat Protection: If the flashlight temperature exceeds 70°C, an overheat protection circuit will disconnect power and shut down the flashlight. Allow it to cool to room temperature and recharge to end this protection.
NOTICE
- Close the dustproof charging port cover immediately after charging to protect it from dust and impurities.
- The dustproof port cover is not waterproof. If water enters, open the cover and place the flashlight tail-down to air-dry or blow-dry it.
- Level 7 (14,000lm) brightness is only available when the battery level is at Level 4 or above.
- Brightness is capped at 200 lumens (Level 1 floodlight) if the battery level is below 5%.
- Charging speed and time depend on the adapter's output power, even though the flashlight supports up to 30W charging.
- When the floodlight is on at Level 3 or higher, the built-in proximity sensor dims the brightness if it senses a close-up obstruction. Brightness restores when the obstruction is gone.
- Turn off the flashlight and lock the knob switch if left unused, carried, or transported. Accidental activation can cause heat buildup, melting the lens, burning objects, or causing disasters.
CAUTIONS ABOUT PROXIMITY SENSOR
- The proximity sensor is under the front lens and works only when the floodlight is on at Level 3 or higher brightness. It does NOT work in spotlight settings.
- The sensor dims brightness automatically for close-up obstructions or strong light sources (sunlight, street lamps, car headlights). Brightness restores when the obstruction or light source is no longer directly ahead.
- Sensor sensitivity varies with object reflectivity. For dark rough objects, response distance is about 5cm. For white flat objects, it's about 80-100cm.
- The sensor may not work if the front lens is blocked by water, dirt, or scratches. Keep the lens clean for proper function.
Warranty
- Within 30 days of purchase: Contact the original seller for repair or replacement.
- Within 5 years of purchase: Contact Olight for repair or replacement.
- Built-in Battery Pack: 5 years.
- Power Adapter: 1 year.
- For fragile or low-value fittings (lanyard, charging cable), contact post-sale within 30 days for quality drawbacks or damage under normal use. Conditional quality assurance applies after 30 days or under abnormal use.
Customer Support
USA Customer Support: cs@olightstore.com
Global Customer Support: customer-service@olightworld.com
Visit www.olightworld.com to see the complete product line of portable illumination tools.
Company Address: Dongguan Olight E-Commerce Technology Co., Ltd, 4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.
Made in China
EU-Declaration of Conformity can be found here: https://olightworld.com/ec-declaration