Dreame Roboticmower A1 User Manual

1 Safety Instructions

1.1 General safety instructions

• Carefully read and understand the user manual before using the product.
• Only use the equipment recommended by Dreame with the product. Any other usage is incorrect.
• Do not allow children to be in the vicinity or play with the machine when it is operating.
• Do not use the product in areas where people are unaware of its presence.
• When manually operating the product with the Dreamehome App, do not run. Always walk, watch your steps on slopes, and maintain balance at all times.
• Avoid using the product when there are people, especially children or animals, in the work area.
• If operating the product in public areas, place warning signs around the work area with the following text: "Warning! Automatic lawn mower! Keep away from the machine! Supervise children!"
• Wear sturdy footwear and long trousers when operating the product.
• To prevent damage to the product and accidents involving vehicles and individuals, do not set work areas or transport paths across public pathways.
• Do not touch moving hazardous parts, such as the blade disc, before it has come to a complete stop.
• Seek medical aid in case of injury or accidents.
• Set the product to OFF before clearing blockages, performing maintenance, or examining the product. If the product vibrates abnormally, inspect it for damage before restarting. Do not use the product if any parts are defective.
• Do not install the main cable in areas where the product will cut. Follow the instructions provided for cable installation.
• Only use the charging station included in the package to charge the product. Incorrect use may result in electric shock, overheating, or corrosive liquid leakage from the battery. In case of electrolyte leakage, flush with water/neutralizing agent and seek medical aid if the corrosive liquid comes into contact with your eyes.
• When connecting the main cable to the power outlet, use a residual-current device (RCD) with a maximum tripping current of 30 mA.
• Only use original batteries recommended by Dreame. The safety of the product cannot be guaranteed with non-original batteries. Do not use non-rechargeable batteries.
• Keep extension cords away from moving hazardous parts to avoid damage to the cords which can lead to contact with live parts.
• The illustrations used in this document are for reference only. Please refer to the actual products.
• Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with these instructions to use the machine, local regulations may restrict the age of the operator.
• Do not connect or touch a damaged cable until it is disconnected from the power outlet. If the cable becomes damaged during operation, disconnect the plug from the power outlet. A worn or damaged cable increases the risk of electrical shock and should be replaced by service personnel.
• Do not push the product forcefully or quickly, as this may damage the product.
• To maintain compliance with the RF exposure requirement, a separation distance of 35 cm between the device and the human should be maintained.
• For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.

1.2 Safety instructions for installation

• Avoid installing the charging station in areas where people may trip over it.
• Do not install the charging station in areas where there is a risk of standing water.
• Do not install the charging station, including any accessories, within 60 cm/24 in of any combustible material. Malfunctioning or overheating of the charging station and power supply can pose a fire hazard.
• For users in the USA/Canada: If installing the power supply outdoors, there is a risk of electric shock. Only install it in a covered Class A GFCI receptacle (RCD) with a weatherproof enclosure, ensuring that the attachment plug cap is inserted or removed.

1.3 Safety instructions for operation

• Keep your hands and feet away from the rotating blades. Do not place your hands or feet near or below the product when it is turned on.
• Do not lift or move the product when it is turned on.
• Use the park mode or set the product to OFF when there are people, especially children or animals, in the work area.
• Ensure that there are no objects such as stones, branches, tools, or toys on the lawn. Otherwise, the blades may be damaged when they come into contact with an object.
• Do not put objects on top of the product or charging station.
• Do not use the product if the STOP button is not functioning.
• Avoid collisions between the product and people or animals. If a person or animal comes in the path of the product, stop it immediately.
• Always set the product to OFF when it is not in operation.
• Do not use the product simultaneously with a pop-up sprinkler. Utilize the Schedule function to ensure that the product and pop-up sprinkler do not operate at the same time.
• Avoid placing a connection channel where pop-up sprinklers are installed.
• Do not operate the product in the presence of standing water in the work area, such as during heavy rain or water pooling.

1.4 Safety instructions for maintenance

• Set the product to OFF when performing maintenance.
• After washing, ensure that the product is placed on the ground in its normal orientation, not upside down.
• Do not reverse the product to clean the chassis. If you do reverse it for cleaning purposes, make sure to restore it to its proper orientation afterward. This precaution is necessary to prevent water from entering the motor and potentially affecting normal operation.
• Disconnect the plug from the charging station or remove the disabling device before cleaning or performing maintenance on the charging station.
• Do not use a high-pressure washer or solvents to clean the product.

1.5 Battery safety

Lithium-ion batteries can explode or cause a fire if disassembled, short-circuited, exposed to water, fire, or high temperatures. Handle them with care, do not dismantle or open the battery, and avoid any form of electrical/ mechanical abuse. Store them away from direct sunlight.

• Only use the battery charger and power supply provided by the Manufacturer. The use of an inappropriate charger and power supply can cause electric shocks and / or overheating.
• DO NOT ATTEMPT TO REPAIR OR MODIFY BATTERIES! Repair attempts may result in severe personal injury, due to explosion or electrical shock. If a leak develops, released electrolytes are corrosive and toxic.
• This appliance contains batteries that are only replaceable by skilled persons.

1.6 Residual risks

To avoid injuries, wear protective gloves when replacing the blades.

1.7 Symbols and Decals

This product conforms to the applicable UK Directives. [UK CA symbol]

Class III [Class III symbol]

Before charging, read the instructions. [Book symbol]

Direct current [Direct current symbol]

Class II [Class II symbol]

INTENDED USE

The garden product is intended for domestic lawn mowing. It is designed to mow often, maintaining a healthier and better looking lawn than ever before. Depending on the size of your lawn, your mower may be programmed to operate at any time or frequency. It is impossible for digging, sweeping or snow cleaning.

2 What's in the Box

The package includes the following items:

• 1 LIDAR protective cover
• 2 A1 Robotic Mower
• 3 Charging tower (with a 10 m extension cable)
• 4 Baseplate
• 5 Power supply
• 6 Cleaning brush
• 7 Screws × 8, Hex key
• 8 Spare blade kits × 9
• 9 User manual
• 10 Lint-free cloth
• 11 Quick start guide

Diagram description: An illustration showing all the components listed above, numbered 1 through 11.

3 Product Overview

Diagram description: Top view of the robotic mower showing the LIDAR sensor, charging contacts, stop button, knob, and display. Bottom view showing the blade disc protective cover, blade disc, front wheel, battery compartment, and rear wheel.

Sensor

4 Installation

4.1 Select a suitable location

• Place the charging station on a level surface near the edge of the lawn and a power outlet. It is recommended to place the charging station in an area with good Wi-Fi signal strength. Note: Use your mobile device to help check the Wi-Fi signal strength of the location. Good Wi-Fi signal strength improves the stability of connection between A1 and app.
• Make sure the ground is soft enough to allow screw installation.
• Keep at least 1m of free space with no obstacles to the left, right and in front of the charging station.
• Make sure the grass around the location is shorter than 6 cm. If the grass is taller, please mow it with a push mower first. Tall grass may make it difficult for A1 to return to the charging station.

Diagram description: Illustration showing the charging station placement with 1m clearance on sides and front, and grass height indication.

4.2 Install the charging station

1. Secure the baseplate to the ground with supplied screws using the hex key.
2. Insert the charging tower to the baseplate until you hear the click.
3. Insert the cleaning brush into the charging tower by aligning the tongue with the groove.
4. Connect the power supply to the extension cable and then connect to a power outlet. Please keep the power supply at least 30 cm above the ground. Note: The LED indicator on the charging station will be constant blue if all connections are correct.
5. Put A1 in the charging station to charge. Make sure the charging contacts on A1 and the charging station are connected correctly. Note: The indicator light will blink green if A1 successfully docks in the charging station.

Diagram description: Illustrations showing the steps for installing the charging station: securing the baseplate, inserting the tower, inserting the brush, connecting the power supply (with 30cm clearance shown), and docking the mower.

LED Indicator on the charging station

5 Preparations before Use

When A1 is turned on for the first time, there are some basic settings to do before A1 is ready to start working.

1. Place A1 on a soft surface and turn it upside down to remove the protective cover from the blade disc. Warning: Make sure the LiDAR protective cover is on the LiDAR.
2. Remove the LiDAR protective cover.
3. Press Stop button to open the cover of the control panel. Press and hold the Power button on the control panel for 2 seconds to turn on A1. Note: A1 will automatically turn on when it docks in the charging station.
4. Select the language you prefer: Turn the knob clockwise to go down and anticlockwise to go up to select your language. Press the knob to confirm.
5. Set PIN code:
   1. Turn the knob to select number from 0 to 9. Turn it clockwise to increase the number from 0 to 9 and turn it anticlockwise to decrease the number. Press the knob to set the next digit. To modify the previous digit, turn the knob anticlockwise until the number becomes 0 and keep turning it one time more. Note: Please do not set the PIN code to "0000".
   2. Enter the PIN code again to complete setting the PIN code. Note: If two passwords do not match, please set the new password again.
6. Connect A1 to the internet: Please scan the QR code to download the Dreamehome app on your mobile device. After the installation, please create an account and log in. You can also download Dreamehome app from App Store or Google Play.
7. Bluetooth connection:
   1. Enable Bluetooth function on your mobile device.
   2. Scan the QR code inside the cover or select A1 manually via the App.
   3. Press and hold the knob on the control panel for 3 seconds and A1 will enter Bluetooth pairing mode.
   4. Pair A1 with your mobile device via Bluetooth. Note: Make sure that your mobile device is within 10 m of A1.
8. Wi-Fi connection: Make sure A1 and your mobile device are on the same Wi-Fi network. Please follow the in-app guidance to complete the connection. Note: Please use a single-band network of 2.4 GHz frequency or dual-band network of 2.4/5 GHz frequency.Note: You can also purchase the Link Module to remotely control A1 without Wi-Fi connection.
9. How to unbind A1? A1 is automatically bound to the Dreamehome account once pairing is successful. Each device can only be bound to one account. It cannot be bound to another account at the same time. To pair A1 with a new account, you need to unbind it first. You can unbind A1 by deleting it from your current account via the app.
10. How to log out of your Dreamehome account or delete it? To log out, go to Me > Settings > Account > Log Out. To delete the account, go to Me > Settings > Account > Delete Account.

Diagram description: Illustrations showing the steps for preparing the mower: turning it upside down, removing the LiDAR cover, powering on, selecting language, setting PIN code (with multiple screens), scanning QR code, and Bluetooth pairing.

6 Map Your Garden

Before mapping, please check the following:

• The battery level of A1 is more than 50%.
• Protective cover of the LiDAR is removed.
• A1 correctly docks in the charging station.

6.1 Create the boundary

1. Tap "Start Creating" via the app, and A1 will check its status and calibrate. It will automatically leave the charging station to do the calibration. Please be careful.
2. Remote control A1 to the edge of your lawn and tap "Set Starting Point" to confirm the starting point of the boundary.
3. Remote control A1 to move along the edge of your lawn to create the work area. When remotely controlling A1 to create the boundary, please bear in mind:
   Warning: Do not manually move A1 when creating the boundary, otherwise the mapping may fail.
   Warning: When mapping begins via remote control, do not remotely dock A1 in the charging station until the mapping is complete. Otherwise, the LiDAR may be blocked, which can cause the mapping to fail.
4. Walk within 5 m behind A1 when remotely controlling it.
5. Do not create the boundary on a slope that exceeds 27%. [Diagram showing slope limit]
6. Avoid creating boundaries inside corridors narrower than 1 m. [Diagram showing minimum corridor width]
7. If there is a height difference of more than 4 cm between the edge of your lawn and the adjacent ground, please keep A1 at least 10 cm from the edge of your lawn. [Diagram showing height difference and clearance]
8. Make sure the turning angles are greater than 90°. [Diagram showing turning angle]
9. When A1 returns to the place 1 m near the starting point, you can tap "Close Boundary" and the boundary will automatically be completed.

Diagram description: Illustrations showing the app interface for starting mapping, setting the starting point, remotely controlling the mower along the boundary, and closing the boundary. Also includes diagrams illustrating slope limits, corridor widths, height differences, and turning angles.

6.2 Set no-go zone

Though A1 can automatically avoid obstacles, it is still necessary to set up no-go zones for areas which A1 is prohibited from entering such as swimming pools and sandpits. For objects you want to protect (such as a flowerbed, a trampoline, a vegetable patch or a naked tree root), please set them as no-go zones. You can remote control A1 to create no-go zones via the app, or go to "Map Editing" to directly draw or delete no-go zones on the map.

6.3 Set multiple zones

If your lawn is separated by roads or you have several isolated lawns, you can tap "Work zone" in the app to continue creating work area via remote control. You can also add, delete or modify the zones in "Map Editing" when the map is finished.

6.4 Set path

For isolated zones, please create a path to connect them. Isolated zones without a path will be inaccessible to A1. Note: A1 can move in the path, but does not mow grass.

Note: If your lawn is divided by passages higher than 4 cm, place an object with a slope equal in height to the passage (such as a ramp).

Diagram description: Illustration showing a passage with a ramp.

To connect two isolated work zones

If there is overlap space between new area(s) and the original area, they will be automatically combined. For isolated areas, please create paths to connect them, otherwise they will be inaccessible to A1. Tap "Path" and remote control A1 to create a path.

Note: Make sure the beginning and end of the path are in the work area. Keep at least 1 m distance between the beginning/end of the path and the boundary.

Diagram description: Illustrations showing the app interface for creating a path and the required clearances (>=1m) for path ends relative to the boundary.

To connect the work area and the charging station

If your charging station is not in the work area, a path should be created to connect it to the work area. Tap "Path", and remote control A1 to create a path that allows it to return to the charging station.

Note: When creating a path, ensure that one end overlaps with the work area by at least 1 metre (≥ 1 m), and the other end is less than 0.2 metres (< 0.2 m) in front of the charging station.

Warning: When creating paths to connect the work area and the charging station, do not remotely dock A1 in the charging station. Otherwise, the LiDAR may be blocked, which can cause the mapping to fail.

Diagram description: Illustrations showing the app interface for creating a path to the charging station, with required clearances (>=1m for work area, <0.2m for station).

6.5 Finish map

Tap "Finish Map" when work areas, paths and no-go zones are completed. A1 should be inside the map when the map is finished, otherwise you will be prompted to remote control it to move back inside the map.

Diagram description: Illustration showing the app interface for finishing the map.

7 Operation

7.1 Get familiar with the control panel

Diagram description: Illustration of the robotic mower's control panel showing the display, Power on/off button, Back button, Start button, Knob, and Home button.

Icon Status

Button Functions

Menu structure overview

Diagram description: A flowchart illustrating the menu structure: Main Page leads to Modes, Schedule, and Settings. Modes include All-Area Mowing and Edge Mowing. Schedule includes View Schedule and Turn on/off Schedule. Settings include Mowing Efficiency, Mowing Height, Obstacle Avoidance Height, Do Not Disturb Mode, Maintain SpurotmeioTime, Frost Protection, Lift Alarm, Off-Map Alarm, Change PIN Code, Volume, Language, Reset the Robot, and About.

*It might be updated depending on the software version.

7.2 Start mowing for the first time

Tips before mowing:

• Use a push mower to mow the grass to a height of no more than 10 cm.
• Clear the obstacles including debris, leaf piles, toys, wires and stones from the lawn. Make sure no children or pets are on the lawn when A1 is mowing.
• Fill in the holes in the lawn.
• Set your mowing preferences in the app in advance (such as mowing efficiency, mowing height and mowing direction).

Press Start button on the control panel and close the top cover in 5 seconds. A1 will leave the charging station and start mowing. You can also tap "Start" in the app to start mowing.

Start via the control panel

1. Press Stop button to open the cover and enter the PIN code.
2. Select "Modes" on the display and press the knob.
3. Turn the knob to select the mowing mode.
4. Press Start button and close the top cover in 5 seconds. A1 will start mowing.

Diagram description: Illustrations showing the steps for starting mowing via the control panel: entering PIN, selecting modes, choosing mowing mode (All-Area Mowing or Edge Mowing), and starting the mower.

Start via the app

1. Open the app.
2. Select a mowing mode and tap "Start" to start mowing.

Diagram description: Illustration showing the Dreamehome app interface with options to select mowing mode and start.

7.3 Pause

To pause the current mowing task, you can press the Stop button on A1 or tap "Pause" in the app.

Note: A1 will be locked and cannot be started directly through app after Stop button is pressed. To resume mowing, please enter your preset PIN code on the control panel first.

Diagram description: Illustrations showing pausing the mower via the control panel (Stop button) and via the app.

7.4 Resume

To resume the task when A1 is paused, press Start button on the robot and close the cover in 5 seconds. A1 will resume the previous mowing task. You can also tap "Continue" in the app to resume the mowing task.

Diagram description: Illustrations showing resuming mowing via the control panel (Start button) and via the app.

7.5 Return to the charging station

To stop the mowing task and send A1 back to the charging station, confirm your PIN code on the control panel and then press Home button. Confirm to end the task and close the cover in 5 seconds. A1 will automatically return to the charging station to charge. You can also tap "Return to Station" in the app to send A1 back to the charging station.

Diagram description: Illustrations showing returning to the charging station via the control panel (Home button) and via the app.

8 Dreamehome App

Where you can explore more

Dreamehome App is more than a remote control. There are many things you can do through the app: completing various settings remotely, experiencing different mowing modes, editing the map freely and adjusting mowing schedules. Moreover, you can view the 3D map of your lawn directly in the app.

8.1 Mowing modes

A1 offers various mowing modes. You can switch between modes through the app.

8.2 Schedule

After the first map is completed, A1 automatically creates two weekly mowing schedules according to the lawn size, which are "Spr & Sum Schedule" and "Aut & Win Schedule". You can tap "Schedule" in the app to do detailed schedule settings. With the schedule function, you can completely leave the daily mowing work to A1. You only need to maintain A1 regularly.

Note: If you worry that A1 may disturb you or your neighbours when it works autonomously during certain hours, you can go to Settings > Do Not Disturb and set Do Not Disturb time in the app.

8.3 Child lock

If you worry that children may operate A1, you can enable "Child Lock" function in the app. With this function enabled, A1 will be locked if no operations are performed for 5 minutes when the cover is open.

Diagram description: Illustration showing the mower with a child lock symbol.

8.4 Rain protection

If you worry that adverse weather conditions may affect the mowing work, you can enable "Rain Protection" function in "Settings" on the control panel or in the app. When this function is enabled, A1 automatically pauses mowing and returns to the charging station when it rains. You can set the rain protection time in the app.

8.5 Frost protection

When temperature is below 6 °C, mowing operations will cause permanent damages to the lawn. Battery will not be able to charge due to self-protection. You can enable "Frost Protection" function in "Settings" on the control panel or in the app. The function enables A1 to automatically pause mowing and return to the charging station when ambient temperature is ≤ 6 °C. It will automatically resume working when temperature is above 11 °C.

Diagram description: Illustration showing the mower with a snowflake symbol indicating frost protection.

8.6 Lift alarm

With this function enabled, A1 will be locked and alarm will go off immediately if it is lifted.

Diagram description: Illustration showing the mower being lifted with an alarm symbol.

8.7 Off-map alarm

With this function enabled, A1 will be locked and alarm will go off immediately if it is away from the map. (This function requires installation of Link Module.)

Diagram description: Illustration showing the mower away from the map area with an alert symbol.

8.8 Real-time location

With Link Module, you can view the current location of A1 in Google Map.

Diagram description: Illustration showing the mower's location on a map.

Note: Dreame development team will continuously conduct OTA (Over-the-Air) updates and maintenance on the firmware and app. Please check for update notifications or enable the Auto-update function to keep the firmware and app up-to-date and enjoy more features.

9 Maintenance

For better performance and lifespan of A1, please clean it regularly and replace worn parts according to the frequency below:

9.1 Cleaning

Warning: Before cleaning, please turn off A1 and unplug the charging station.

Warning: Please make sure LiDAR protective cover is on the LiDAR before turning A1 upside down to avoid damages to the LiDAR.

The body of A1, chassis and blade disc:

1. Turn A1 off.
2. Put the LiDAR protective cover on the LiDAR.
3. Turn A1 upside down.
4. Clean the body of A1, blade disc and chassis with a hose. Warning: Do not touch the blades when cleaning the chassis. Please wear gloves when cleaning. Warning: Please do not use a high-pressure washer for cleaning. Do not use detergents for cleaning.
5. Use a lint-free cloth to carefully clean the LiDAR sensor.

Diagram description: Illustrations showing the steps for cleaning the mower body, chassis, and blade disc: turning off, covering LiDAR, turning upside down, cleaning with a hose, and cleaning the LiDAR sensor.

Charging contacts:

Use a clean cloth to clean the charging contacts on A1 and the charging station. Keep the charging contacts dry after cleaning.

Diagram description: Illustrations showing cleaning the charging contacts on the mower and the charging station.

9.2 Replacement of the components

Replacement of the blades

To keep the blades sharp, please replace the blades regularly. It is recommended to replace the blades every 6-8 weeks or sooner. Please only use Dreame original blades.

Warning: Please turn off A1 and wear protective gloves before replacing the blades.

Note: Please replace all three blades at the same time to ensure a balanced cutting system. Replace the receptacles as well when replacing the blades because worn receptacles can make the blades loose and cause injury. This ensures that all blades and receptacles wear at the same speed.

1. Turn off A1.
2. Make sure the LiDAR protective cover is on.
3. Put A1 on a soft surface and turn it upside down.
4. Remove the receptacle by pressing the button under the blade disc.
5. Remove the blade by aligning the hole of the blade with the shaft.
6. Remove 3 blades and receptacles.
7. Press the button under the blade disc and align the hole of the receptacle with the shaft to fasten the receptacles and the blades.
8. Make sure the blades can rotate freely.

Diagram description: Illustrations showing the steps for replacing the blades: turning off, covering LiDAR, turning upside down, removing receptacle, removing blade, removing all blades/receptacles, fastening new blades/receptacles, and checking for free rotation.

Replacement of the cleaning brush

When the cleaning brush for the LiDAR sensor wears out, its bristles may fray or deteriorate, affecting its cleaning performance. Please replace the cleaning brush regularly to keep a good cleaning result. It is recommended to replace the cleaning brush every 12 months or sooner.

Note: Before replacing the cleaning brush, please make sure to unplug the charging station.

10 Battery

For long-term storage, charge A1 every 6 months to protect the battery. Battery damage caused by over-discharge is not covered by the limited warranty. Do not charge the battery at an ambient temperature above 45° C (113° F) or below 6° C (43° F). The long-term storage temperature for the battery should be between -10 and 35° C (14 and 95° F). To minimize the damage, the recommended storage temperature for the battery is between 0 and 25° C (32 and 77° F).

Note: The lifespan of A1's battery depends on frequency of usage and hours of operation. If the battery is damaged or cannot be charged, do not dispose of the obsolete or faulty battery arbitrarily. Please obey local recycling regulations.

Low-power charging mode:

With low-power charging mode on, functions not related to charging will be disabled. (Display and network will be turned off.)

• To enable low-power charging mode, press and hold Start button and Home button together, and press Back button 5 times quickly at the same time. You will hear a voice prompt: Low-power charging mode is on.
• To disable low-power charging mode, restart A1 or press Power button 5 times quickly to turn off low-power charging mode.

11 Winter Storage

A1

1. Charge the battery fully and turn A1 off.
2. Clean A1 thoroughly before putting it into storage in winter.
3. Put on the LiDAR protective cover and blade disc protective cover.
4. Store A1 inside in a dry place, at a temperature above 0° C.

Charging station

Unplug the charging station and store it in a dry and cool place, away from direct sunlight.

Note: If you have not used A1 for a long time, please remap your garden as significant changes to the garden environment may cause positioning errors.

12 Transport

For long distance transport, it is recommended to use the original packaging to protect A1. Put on the LiDAR protective cover and blade disc protective cover.

Warning: Please turn A1 off before transporting it.

Warning: Before lifting A1, please make sure it is turned off. Lift the product by the rear with the blade disc away from your body.

13 Troubleshooting

14 Specifications

Basic information

Mowing

Noise emissions

Working condition

Connectivity

Driving motor

Cutting motor

Battery (mower)

Power supply

Charging station

[1] Charging time applies when A1 automatically returns to the charging station at low battery.

[2] Requires the installation of Link module.

[3] Requires the installation of Link module.

The product is in compliance with UK PSTI regulations, the full text of declaration of conformity is available at the following internet address: https://global.dreametech.com

For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs