NAXA NSH-3001 Wi-Fi Smart Camera User Manual

1. Product Introduction

Packing List: Smart Camera x 1, Manual x 1, USB Power Cord x 1, Screw Accessories Package x 1.

Diagrams:

• Diagram showing the Smart Camera unit.
• Icon representing the User Manual.
• Icon showing screw and wall plug accessories.
• Diagram of a USB power cord.
• Diagram of a power adapter.

2. Install the Smart Life App

Download the Smart Life app from your Google Play / Apple App Store. Access the app by scanning the provided QR code. Register and Login to continue.

A QR code is provided to download the "Smart Life" application.

3. Add the Device

Please make sure that there is an available Wi-Fi network and that you are connected to the internet.

Find the USB port on the bottom of the smart camera and insert the power cord to turn on the device.

Then go to the Smart Life app home page and click "ADD DEVICES".

Select "Security camera".

Select the "QR Code" ➡️ in the upper right corner of the screen. Click confirm and proceed according to the prompts on your mobile phone.

Screenshots of the Smart Life app interface for adding a new device are shown, illustrating steps like selecting device type and scanning a QR code.

4. Video Browsing in the Smart Life App

Screenshots of the Smart Life app displaying video browsing features. The first image shows a live camera feed with options at the bottom. Subsequent images illustrate different views and playback controls.

App Interface Elements:

• ① Preview Mode
• ② Voice Switch ?
• ③ Full Screen
• ④ More Setting ⚙️
• ⑤ SQ (Image Quality)
• ⑥ Floating Window
• ⑦ Play / Pause ▶️⏸️
• ⑧ History file (Make sure to insert Micro SD card)

5. App Interface

1. Click the ? icon to enable the microphone function. By holding the speaker button down, you can communicate with the people/pets that you see on screen with the camera.
2. Click ? to start recording or take a screenshot (files recorded in mobile phone).
3. Click ? to view the motion sensor and alerts settings. (Three sensitivity options: Low, Medium, High).
4. Click ➡️ to view in full-screen mode.
5. Image quality adjustment: Two modes, SD and HD.
6. Recording and playback: You can watch the recorded videos on the local disk and SD card.
7. Alarm notification and triggered screenshot can be viewed in the message center.

6. More Settings

1. Click ⚙️ to view more settings.
2. Device Sharing: Share the device to multiple users with the Smart Life app (only the admin account is allowed to change the settings).
3. Device Info: IP address, device ID, timezone, and Wi-Fi signal (6.2).
4. Basic Function Settings: Set flip and time stamp.
5. SD card settings: Check the status of the SD card and set recording and alarm mode.

7. Important Reminders

• Avoid contact with sharp objects.
• Avoid placing on furniture or places where it might fall.
• Avoid tangling the wires, and keep them tucked away from the camera to avoid tripping hazards and pinching.
• Ensure that the camera is within coverage range of the wireless Wi-Fi signals.
• When switching to a new network environment, reset the camera via the reset button on the back. Insert a small object and hold the reset button for about 5 seconds. A voice prompt will state "Reset camera successfully". Then you may connect to the new network.

8. Support

If you have problems with the operation of this product, please consult the instructions in this manual. Please also visit us on the web at www.naxa.com to get daily news, alerts, and documentation for your device. For additional assistance, please contact NAXA Technical Support.

NAXA Technical Support
2320 East 49th St.
Vernon, CA 90058
http://www.naxa.com/supportcenter/

9. Trademark & Regulatory Statements

The application "Smart Life" and all features of the camera Smart Life LLC. are registered trademarks or characteristics of the distinctive brand of Tuya, LLC. Google Play™ store and all Google Brand Features are trademarks of Google Inc., LLC. Apple App Store™ and all Apple Brand Features are registered trademarks or characteristics of Apple Inc.

FCC Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.