Belkin BOOST↑CHARGE™ PRO
Portable Fast Charger for Apple Watch
Chargeur portable ultra-rapide pour Apple Watch
SKU/Model: WIZ015
UGS/Modèle: WIZ015
Setup and Requirements
Connect the wireless charger using a cable of 0-4ft length.
Ensure a power source of at least 5W ([greater than or equal to] 5W) is used.
Using the Charger
Place your Apple Watch on the charging puck.
The charger features a dial to select the correct size for your Apple Watch case:
- 38mm
- 40mm
- 41mm
- 42mm
- 44mm
- 45mm
Compatibility Guide:
Configuration | Apple Watch Size (mm) | With Band Attached |
---|---|---|
A | 38, 40, 41 | ❌ [Incompatible] |
B | 42, 44, 45 | 38, 40, 41 |
C | ❌ [Incompatible] | 42, 44, 45 |
Note: '❌' indicates incompatibility for the specified configuration.
Product Images
Visual representation of the charger with and without an Apple Watch attached.
Document Revision: 8820b103267 Rev. A00
Regulatory and Sustainability Information
This section provides important regulatory and sustainability details for the product.
SKU/MODEL: WIZ015
RÉFÉRENCE / MODÈLE: WIZ015
North America Safety and Compliance
Safety Instructions
WARNING: Failure to follow these instructions could result in fire, electric shock, injury, or damage.
- Connect the power supply to a nearby, accessible power outlet.
- Use indoors in a dry location only; avoid heat and humidity.
- Keep the charger and power supply away from liquids.
- Unplug when not in use for extended periods.
- Do not store in extreme temperatures; use at room temperature.
- Do not use if visible defects are present.
- Do not attempt to service, modify, or disassemble.
- Using non-Belkin power supplies may increase risk.
- Charging speed depends on various factors.
CAUTION: Discontinue use and unplug if problems occur; contact Belkin.
FCC Statement
This product complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference and acceptance of received interference.
This equipment has been tested and found to comply with Class B digital device limits, providing reasonable protection against harmful interference in residential installations.
FCC Caution: Unauthorized modifications may void user authority to operate.
Radiation Exposure Statement
Complies with FCC limits for uncontrolled environments. Install and operate with at least 20 cm distance from the body.
Innovation, Science, and Economic Development Canada (ISED) Statement
This device contains licence-exempt transmitters/receivers complying with ISED standards.
Europe Safety and Compliance
CE Declaration of Conformity
Belkin International, Inc. declares compliance with Directive 2014/53/EU and RoHS Directive 2015/863. Full text available at: www.belkin.com/doc.
Caution:
Unauthorized modifications may void user authority to operate.
Radiation Exposure Statement:
Complies with radiation exposure limits for uncontrolled environments. Install and operate with at least 20 cm distance from the body.
Frequency band: 326.5 kHz, 1.778 MHz
Maximum power transmitted: -5 dBµA/m
UKCA Conformity:
Complies with Radio Equipment Regulations 2017 (S.I. 2017/1206).
Waste Electrical and Electronic Equipment (WEEE) Directive
For disposal information, refer to www.belkin.com/uk/weee-regulations/.
The symbol of a crossed-out rubbish bin indicates separate collection at the end of the product's life.
Recycling programs may vary by region.
Technical Specifications (EU Regulation)
Information for end-users as per COMMISSION REGULATION (EU) 2019/1782
Parameter | Value |
---|---|
Manufacturer | Channel Well Technology Co., Ltd. |
Address | No. 222, Sec. 2, Nankan Rd., Lujhu Township, Taoyuan Hsien, 33855 Taiwan |
Model Identifier | 2AFG005B |
Input Voltage | 100-240V |
Input AC Frequency | 50-60Hz |
Output Voltage | 5.0V |
Output Current | 1.0A |
Output Power | 5.0W |
Average Active Efficiency | 73.77% |
Efficiency at Low Load (10%) | 64.59% |
No-load Power Consumption | 0.075W |
French Safety Instructions
Consignes de sécurité supplémentaires
AVERTISSEMENT: Le non-respect de ces instructions peut entraînner un risque de feu, de choc, de blessure ou de dommage.
- Branchez l'adaptateur secteur sur une prise murale accessible.
- Utilisez le produit en intérieur seulement, dans un endroit sec, et évitez la chaleur ou l'humidité.
- Éloignez le chargeur et l'adaptateur secteur des liquides.
- Débranchez le chargeur s'il reste inutilisé pendant une période prolongée.
- Ne rangez pas l'appareil dans des zones très froides ou très chaudes. Utilisation recommandée à température ambiante.
- N'utilisez pas le chargeur s'il présente des défauts visibles.
- N'essayez pas de réparer, modifier ou démonter le chargeur.
- L'utilisation d'un adaptateur non recommandé par Belkin peut augmenter les risques.
- La vitesse de chargement dépend de la puissance du chargeur et d'autres facteurs.
Manufacturer and Support Information
Belkin International, Inc.
Los Angeles, CA 90094, USA
Belkin Ltd.
Unit 1, Regent Park, Booth Drive, Wellingborough, Northants NN8 6GR, United Kingdom
Belkin B.V.
Herikerbergweg 106, Plaza Arena - Jupiter, 1101 CM, Amsterdam, The Netherlands
Belkin Asia Pacific Ltd. Hong Kong
Belkin Ltd. Tuggerah, Australia
Distributor (China): 儿金贸易(上海)有限公司 (Belkin Trading (Shanghai) Co., Ltd.)
Authorized Manufacturer: Belkin Asia Pacific Limited
Customer Support Center (Japan):
Phone: 0120-532-372 (Toll-free)
Mobile: 03-5767-6029
Hours: Mon-Fri 9:00-12:00, 13:00-17:00 (excluding holidays)
Email: japansupport@belkin.com
Belkin Tech Support: www.belkin.com/support
Made in Vietnam.
Visit us at: belkin.com