FRYSA METOD

Important Safety Information

WARNING: The electrical, water, and gas installation and connection must be carried out by a qualified technician according to the manufacturer's instructions and in compliance with the local safety regulations.

Product Overview and Dimensions

This guide details the installation and assembly of the IKEA FRYSA METOD appliance, designed for integration into the METOD kitchen system.

Key Dimensions:

• Height: 1770 mm
• Width: 550 mm
• Depth: 540 mm

Ventilation: Ensure a minimum ventilation opening of 200 cm² at the top and bottom. Maintain a minimum clearance of 2 mm on the sides.

Included Parts and Tools

Parts: Screws (Type A): 8x, Screws (Type B): 18x, Ice Scraper (C): 1x, Brackets (D): 2x, Brackets (E): 4x, Brackets (F): 4x, Brackets (G): 4x, Bracket (H): 1x.

Tools Required (not included): Screwdriver, Hammer, Scissors, Spirit Level, Gloves.

Assembly Steps

Follow these steps for assembly. Refer to the diagrams for precise placement and orientation.

Step 1: Cabinet Preparation

Prepare the cabinet according to the initial diagrams. This may involve inserting dowels or preparing mounting points for brackets.

Step 2: Attach Hinge Plates to Cabinet

Mount the hinge plates (part E) to the inside of the cabinet frame using screws (part A). Ensure correct positioning as illustrated.

Step 3: Attach Hinges to Appliance Door

Secure the hinges to the appliance door using the provided screws (often part B).

Step 4: Mount Appliance Door to Cabinet

With assistance if needed, attach the appliance door to the mounted hinge plates. Secure the door using screws (part B).

Step 5: Install Top Bracket

Attach the top bracket (part H) to the top of the appliance, potentially for securing it or for attaching a decorative panel.

Step 6: Install Internal Components

Insert shelves, drawers, and other internal fittings into the appliance. Some may require specific brackets or runners (parts F, G).

Step 7: Secure Appliance to Cabinet

Use brackets (F, G) and screws (B) to securely fasten the appliance within the kitchen cabinet, following the specific diagrams.

Step 8: Install UTRUSTA System Components

If applicable, install UTRUSTA components (e.g., for drawers) according to the diagrams, using the appropriate rails and screws.

Step 9: Adjust Door Alignment

Fine-tune the door's position using the adjustment screws on the hinges. This ensures the door is level, plumb, and closes correctly.

Step 10: Final Checks and Securing

Review all connections, tighten all screws, and confirm the appliance is stable and the door operates smoothly. Use parts like C (Ice Scraper) and D as indicated in specific steps.

Note on Cabinet Heights: This appliance can be installed in cabinets of 200 cm, 220 cm, and 240 cm heights. Specific mounting details may vary; consult the detailed diagrams for your cabinet size.

Online Resources

For further assistance, detailed diagrams, and product information, visit www.ikea.com.