iScooter W9 User Manual
Model: W9
Version: EU_NA_V1
IMPORTANT! Read carefully and keep for future reference. Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
Package Contents
[?] Package Contents:
- Spare Inner Tube
- Wrench Kit
- User Manual & Safety Instructions
- Charger
Product Overview
[?] The diagram shows an electric scooter. Key components are indicated by numbers: 1 points to the control pad/display area on the handlebar, 2 to the handlebar folding mechanism, 3 to the display screen, 4 to the brake levers, 5 to the throttle, 6 to the height adjustment clamp on the stem, 7 to the headlight and horn assembly, 8 to the disc brake rotor on the front wheel, 9 to the charging port, 10 to the underbody lights on both sides, 11 to the main folding mechanism, 12 to the turn signals on the handlebar ends, 13 to the footrest, and 14 to the rear taillight and brake light.
Product Components
- 1. Control Pad
- 2. Handlebar Folding Sleeves
- 3. Display
- 4. Brake Levers
- 5. Throttle
- 6. Height Adjustment Clamp
- 7. Headlight with Horn
- 8. Disc Brake Rotor
- 9. Charging Port
- 10. Underbody Lights (2 Sides)
- 11. Folding Mechanism
- 12. Turn Signals (2 Sides)
- 13. Footrest
- 14. 2-in-1 Taillight & Brake Light
Quick Setup and Folding
Unfolding the Scooter
Step 1: Press down the folding latch and lift the stem to the riding position until you hear a click. Step 2: Pull the safety pin. Step 3: Close the S-shaped lever to the end. Step 4: Release the safety pin until it locks the S-shaped lever in place. Step 5: Lift the two ends of the handlebar to the horizontal positions until you hear clicks from the folding sleeves, indicating they are locked. Step 6: Adjust the handlebar to your desired height and fully tighten the height adjustment clamp.
Note: If you find it hard to press the folding latch, lift the stem a little.
Folding the Scooter
Step 1: Power off the scooter. Step 2: Pull the safety pin, open the S-shaped lever, press down the folding latch, and fold down the stem. The stem can be used as a carrying handle.
Note: If you find it hard to slide the folding sleeves, lift the ends of the handlebar up a little.
Display Information
[?] The display shows various information:
- 1. Riding Mode (ECO, STD, TURBO)
- 2. Speed indicators (MAX Speed, AVG Speed, Error messages)
- 3. Motor Overheating Alarm [?]
- 4. Turn Signals [➡️⬅️]
- 5. Headlight [?]
- 6. Cruise Control [⚙️]
- 7. "Ready to Start" indicator
- 8. App Connected status [?]
- 9. Battery Level [?]
- 10. Trip Distance
- 11. Real-time Speed
- 12. Total Distance (Odometer) [?️]
Error Codes: If you see any error code on the screen, contact customer service for support.
Basic Operations
Power ON/OFF: Hold the Power button [⚡] for 3 seconds.
Headlight ON/OFF: Press the Headlight button [?] to turn on/off the headlight, taillight, and underbody light.
Switch Riding Mode: Press the S button [⚙️] to cycle through the riding modes (ECO, STD, TURBO).
Turn Signals: Press the left/right arrow [◀️▶️] of the turn signal switch to activate the respective turn signal.
Horn: Press or hold the Horn button [?].
Imperial/Metric Units: Press the M button [?] to switch between imperial and metric units.
Settings Menu
To enter settings, press the Power [⚡] and Horn [?] buttons for about 3 seconds. Use the Horn button to cycle through setting items (P1, P2, P4).
- P1 (Start Mode): Press S to select P10 (non-zero start) or M to select P11 (zero start).
- P2 (Cruise Control): Press S to select P20 (disable) or M to select P21 (enable).
- P4 (Odometer Reset): Press M for 3 seconds to reset the odometer (total distance).
Note: After setting, wait about 6 seconds for settings to save automatically.
About Charging
[?] The scooter is fully charged when the charger indicator changes from red to green. The scooter has charging protection and will cut off charging automatically after a full charge; however, overcharging is not recommended. Keep the charging port cover closed when not charging. The scooter cannot be turned on during charging.
Disc Brake Adjustment
[⚙️] To adjust the brake cable, you need a hex wrench to loosen the bolt on the cable clamp. If the disc brake is dragging, slide the arm of the clamp backward along the cable while holding the cable in one hand, then retighten the bolt. If the disc brake is not working efficiently (cable is slack), slide the arm of the clamp forward along the cable while holding the cable in one hand, then retighten the bolt.
To eliminate brake noise:
- Loosen the two brake caliper mounting bolts (not the cable clamp bolt).
- Reposition the brake caliper to ensure the brake rotor is centered between the brake pads.
- Retighten the mounting bolts.
Specifications
| Feature | Specification |
|---|---|
| Model | W9 |
| Unfolded Size | 45.7 x 25.2 x 52.2 in. (1160 x 640 x 1325 mm) |
| Folded Size | 45.7 x 9 x 16.5 in. (1160 x 230 x 420 mm) |
| Weight | 48.0 lbs (21.75 kg) |
| Battery Capacity | 48 V, 14 Ah |
| Motor Power | 1000 W |
| Wheel Diameter | 10 in. |
| Range | 22-28 miles (35-45 km) * |
| Max Load Capacity | 264 lbs (120 kg)* |
| Recommended Age | 14+ |
| Operating Temperature | 28.4°F-95°F (-2°C-35°C) |
| Charger Input & Output | AC 100-240 V, 50/60 Hz; DC 54.6 V, 1.5 A |
| Charging Time | 6-8 h |
| Waterproof Rating | IPX4 |
*About the Range: Measured in a laboratory under 100% battery level condition. The range will differ depending on different factors, such as load, humidity, wind speed, and operation habits.
*Load Capacity: The structure of this scooter is designed to support a maximum load of 264 lbs (120 kg). For the best riding experience, 70% of the maximum load is recommended.
Safety and Compliance
FCC Statement: This equipment complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference and acceptance of received interference.
RF Exposure Information: The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions.
CE Warning: The appliance is not for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, unless supervised. Children should be supervised to ensure they do not play with the appliance.
Disposal of Electrical and Electronic Equipment: [?️] Dispose of this device separately from unsorted municipal waste. Do not dispose of in residual waste bins or yellow bins. Batteries must be removed and disposed of separately.
Options for Returning Old Devices (EAR): Owners can hand over old devices to designated collection points for proper disposal.
Declaration of Conformity: For the full text of the EU Declaration of Conformity, contact support@e-scootworld.com.
Data Protection: End users are responsible for deleting personal data from the equipment before disposal.
App and Manufacturer Information
Download "Voltix" App: Scan the QR code [QR Code] or search for "Voltix" on the App Store (iOS) or Google Play Store (Android).
Manufacturer: Dongguan Yicheng Shengda Information Technology Co., Ltd., Room 301, No. 28, Houshan Road, Nanchongkou, Humen Town, Dongguan City, Guangdong Province, China. Email: support@e-scootworld.com
EC REP: GAVIMOSA CONSULTORIA, SOCIEDAD LIMITADA, CASTELLANA 9144, 28046 Madrid. Email: compliance.gavimosa@outlook.com. Contact: Jorge Wilson. Tel: +34 688185858
[FCC] [CE] [RoHS]
