Tamiya 1/12 Yamaha SRX600 Model Kit
Introduction to the Yamaha SRX600 Motorcycle
The Yamaha SRX600, which debuted in April 1985, was Yamaha Motor Company's notable entry into the sports motorcycle market. Unlike popular racer replica motorcycles, the SRX600 features an orthodox 608cc, air-cooled SOHC 4-stroke, 4-valve single-cylinder engine. This engine delivers torque and sound characteristic of larger single-cylinder engines, enhanced by Yamaha's YDIS (Yamaha Duo Intake System) for smooth power delivery across the RPM range. The engine is housed in a double cradle frame made of square high-tensile strength steel tubing, incorporating an oil cooler for high performance. Its 18-inch front and rear wheels provide neutral handling and stability on various road conditions. The rear suspension utilizes proven twin shock absorbers. The SRX600 set new standards in performance and styling, appealing to riders seeking a stylish and capable motorcycle.
This document provides assembly and painting instructions for the Tamiya 1/12 scale model kit of the Yamaha SRX600.
Before You Begin Assembly
Important Pre-Assembly Checks
- ? Read all instructions thoroughly before assembly.
- ? Check kit contents against the parts list to ensure all pieces are present.
- ? Before starting assembly, review the diagrams to understand the overall process.
- ? When cementing plated parts, carefully remove the plating from the areas to be bonded to ensure proper adhesion.
- ? Ensure adequate ventilation in your workspace when using adhesives and paints.
Required Tools
- [Nippers] (Side cutter)
- [Tweezers]
- [Small Screwdriver (-)]
- [Cutter Knife]
- [Thin Vinyl Tubing] (e.g., 1.5mm diameter)
Paint Color Guide (Tamiya Paints)
<| Tamiya Code | Color Name | Description |
|---|---|---|
| X-4 | Blue | Blue |
| X-5 | Green | Green |
| X-6 | Orange | Orange |
| X-7 | Red | Red |
| X-10 | Gun Metal | Gun metal |
| X-11 | Chrome Silver | Chrome silver |
| X-18 | Semi Gloss Black | Semi gloss black |
| X-26 | Clear Orange | Clear orange |
| X-27 | Clear Red | Clear red |
| XF-1 | Flat Black | Flat black |
| XF-16 | Flat Aluminum | Flat aluminum |
| XF-56 | Metallic Grey | Metallic grey |
| TS-17 | Gloss Aluminum | Gloss aluminum |
| TS-14 | Black | Black |
Assembly Instructions
Engine and Drivetrain Assembly
Begin by assembling the engine components. Attach parts such as B11, B12, B13, B15, B17, B18, B19, B20, B21, B22, B23, B24, B25, B26, B27, B30, B31, B32, B33, B34, B35, and B37 according to the diagrams, using specified paints like XF-16 (Flat Aluminum), X-11 (Chrome Silver), and X-18 (Semi Gloss Black) where indicated. Assemble the engine block, cylinder head, and other internal engine parts. Attach the exhaust system. Assemble the wheels, including mounting the tires (thin or thick variants) onto the rims, and paint them using colors like XF-56 (Metallic Grey) for metallic parts. Assemble and attach the rear swingarm and suspension components, including the shock absorbers. Assemble the front forks, steering assembly, and front wheel. Pay attention to the specific part numbers and their corresponding paint codes for each step.
Frame and Chassis Construction
Construct the main frame structure using parts like C1, C5, C8, C11, C12, C13, C14, and C15. Apply specified paints such as XF-16 (Flat Aluminum) and X-18 (Semi Gloss Black) as indicated. Mount the assembled engine onto the frame. Attach the rear swingarm and wheel assembly to the frame. Connect the front fork assembly to the frame, ensuring it is properly aligned.
Bodywork and Finishing Touches
Assemble the bodywork components, including the fuel tank (parts A4 through A24), side covers, seat, and fenders. Paint the fuel tank and covers using specified Tamiya spray paints, such as TS-17 (Gloss Aluminum) for silver finishes or TS-14 (Black) for black finishes. Attach the handlebars and connect various tubes and wires, such as the vinyl tubing, using the indicated lengths and part numbers. Apply decals to the appropriate locations as per the diagrams, ensuring they are correctly positioned.
Painting and Decal Application
Painting Guide
The Yamaha SRX600 model kit is available in two main body color schemes: Fine Silver and Greenish Black. The side covers are designed to showcase the aluminum finish, and the model includes numerous chrome-plated parts to enhance its realistic appearance. Careful detail painting is recommended to achieve a high-quality finish that reflects the elegance of the actual motorcycle.
Decal Application Guide
- 1. Cut out the desired decal from the sheet using scissors.
- 2. Dip the decal in lukewarm water for approximately 10 seconds, then place it on a clean, dry cloth.
- 3. Hold the edge of the backing paper and carefully slide the decal onto the model in its intended position.
- 4. Adjust the decal's position by gently wetting it with your finger.
- 5. Press down gently with a soft cloth to remove any excess water and air bubbles, ensuring the decal adheres smoothly.
Parts Ordering Information
If any parts are lost or damaged during assembly, they can be ordered from Tamiya. Please refer to the kit's parts list for specific part numbers and follow the instructions provided for ordering, which typically involves sending payment via mail.
