Micsig SATO1000 Series Automotive Tablet Oscilloscope
DATASHEET
Product Overview
The Micsig SATO1000 is a new generation of Automotive Tablet Oscilloscope, building upon the previous ATO1000 series. It features an integrated touch screen, an upgraded hardware and software system, four channels, 100MHz bandwidth, a maximum sampling rate of 1 GSa/s, and up to 70 Mpts of memory depth. The SATO1000 is equipped with a highly sensitive digital trigger system and comprehensive Automotive Diagnostic software presets, designed to assist mechanics in quickly and easily identifying various vehicle problems. These include issues with Charging/Start circuits, Sensors, Actuators, Ignition systems, and Networks (CAN, CAN FD, LIN, Flexray, K line). Combined with Micsig's patented touch algorithm technology, the SATO1000 offers an unparalleled user experience.
Key Specifications
| Model / Ordering Number | SATO1004 |
| Analog Channels | 4 |
| Bandwidth | 100MHz |
| Sampling Rate (Max.) | 1 GSa/s (single channel) |
| Memory Depth | 70 Mpts (single channel) |
| Waveform Capture Rate (Max.) | 130,000 wfms/s |
| Support Tests | Charging/Start Circuits, Sensors, Actuators, Ignition, Networks (CAN, CAN FD, LIN, Flexray, K line), Combination Tests |
| Bandwidth Filter | Full bandwidth, Low pass |
| Interfaces | Wi-Fi, USB 3.0/2.0 Host, USB Type-C, Grounding, HDMI, Trigger out |
| Display | Industrial 8" TFT-LCD (800*600), 14*10 grids |
| Dimension / Net Weight | 265*192*50mm / 1.9kg (with battery) |
| Battery | 7.4V, 7500mAh, Li-ion battery |
Characteristics & Features
- Soft TPU + ABS rubber protector
- 8" Capacitive seamless touchscreen
- Pre-installed side handle strap
- Triangle link bracket
- Intuitive user interface
- Multifunctional knob panel
- Integrated Auto-Diagnostic software presets
- Built-in 7500mAh Li-ion battery, offering up to 5 hours of battery life. Supports Power-off lock for enhanced security during travel.
- Micsig Universal Probe Interface (UPI): Intelligent bi-directional oscilloscope to probe communication, simplifying setup for attenuation and calibration.
- Complete Connectivity: Includes USB3.0/2.0, Type-C, HDMI, Wi-Fi, Power-off lock, and Grounding port.
Automotive Diagnostic Presets
The SATO1000 offers various diagnostic presets to aid in troubleshooting:
- 12/24V Charging & Start Circuit Tests: Supports AC Ripple and Cranking Current tests.
- Sensor Tests: Allows direct measurement of various sensor waveforms, comparing them with standard waveforms to easily identify potential problems.
- Actuator Tests: Supports testing of multiple actuators, including Carbon Canister & EGR solenoid valves, Fuel Pumps, Injectors (Petrol and Diesel), Cooling Fans, and Pressure Regulators.
- Ignition System Tests: Capable of testing both Primary and Secondary ignition signals to diagnose potential malfunctions in systems composed of primary and secondary coils and spark plugs.
- Network Communication Tests: Acquires and decodes CAN High/CAN Low, CAN FD, LIN, FlexRay, and K line signals for professional network communication testing on vehicles.
- General Fault Analysis: Users can analyze timing and quantitative relationships between collected waveforms to diagnose complex electronic faults.
Advanced Features
- High Waveform Update Rate: With a waveform update rate of up to 130,000 wfm/s, the SATO series can easily capture unusual or low-probability events.
- Ultra-deep Memory: Utilizes hardware-based Zoom technique and a memory depth of up to 70 Mpts, allowing users to browse waveforms more easily and zoom in quickly to focus on areas of interest.
- Powerful Trigger Functions: Supports various trigger types including Edge, Pulse, Logic, N Edge, Runt, Slope, Timeout, Video, and Serial triggers, with intuitive settings and fast trigger source switching.
- Convenient Cursor Measurement: Features one-touch access to horizontal and vertical cursors that can be moved independently or simultaneously for an enhanced user experience.
- Large 32GB Internal Storage: Allows wireless access and viewing of files like pictures and videos via PC or mobile phone.
- Remote Control and Demonstration: Supports PC software and Mobile Apps (Android/iOS) for remote control, online upgrades, and HDMI connection for training and demonstrations.
Specifications
Vertical System
| Input Coupling | DC, AC, GND |
| Rise Time | ≤ 3.5ns |
| Input Impedance | 1MΩ±1%||14.5pF±3pF |
| Vertical Resolution | 8 bits |
| DC Gain Accuracy (Amplitude Accuracy) | <±2% (1MΩ Input) |
| Input Sensitivity Range | 1mV/div~10V/div (1MΩ Input) |
| Ch-to-Ch Isolation DC to Maximum Bandwidth | ≥40dB (100:1) |
| Offset Range | ±2.5V (Probe attenuation X1, <500mV/div), ±120V (Probe attenuation X1, ≥500mV/div) |
| Maximum Input Voltage | CAT I 300Vrms (1MΩ Input) |
Horizontal System
| Time Base | 2ns/div~1ks/div |
| Time Base Delay Time Range | 14 divisions ~ 14ks |
| Clock Drift | ≤±5ppm / year |
| Time Base Accuracy | ±20ppm |
Sampling System
| Sampling Method | Real-Time |
| Peak Detect | Capture narrow glitches at all sweep speeds: CH - 1ns, dual CH - 2ns, four CH – 4ns |
| Maximum duration at highest sampling rate | 70ms |
| Average | Selectable from 2, 4, 8, 16, 32, 64, 128, 256 |
| Envelope | Selectable from 2, 4, 8, 16, 32, 64, 128, 256, ∞ |
Trigger System
| Trigger Mode | Auto, Normal, Single |
| Trigger Coupling | DC, AC, high frequency reject, low frequency reject, noise reject |
| Trigger Holdoff Range | 200ns~10s |
| Trigger Types | Edge, Pulse Width, Logic, Video, Time Out, Slope, Runt Pulse (Runt), N Edge |
Waveform Measurements
| Cursors | Horizontal, Vertical, Cross |
| Automated Measurements | 31 types, including: Period, Frequency, Rise Time, Fall Time, Delay, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Positive Overshoot, Negative Overshoot, Phase, Peak-to-Peak, Amplitude, High, Low, Maximum, Minimum, RMS, Cycle RMS, Mean, Cycle Mean |
| Hardware Frequency Meter | 6 digits |
| Waveform Math | Add, Subtract, Multiply, Divide |
| Dual Waveform | Spectral magnitude. Set FFT vertical scale to linear RMS or decibel dBV RMS, set FFT window to Rectangular, Hamming, Hanning or Blackman-Harris |
Display System
| Display Type | 8-inch TFT LCD multi-point capacitive touch screen |
| Display Resolution | 800*600 pixels |
| Operation Method | Touch, Button, Touch + Button |
| Persistence Duration | Auto, 10ms~10s, ∞ |
| Time Base Mode | YT, XY, Zoom, Roll (scroll waveforms right to left across the screen at sweep speeds slower than or equal to 200 ms/div) |
| Expand Benchmark | Center, Trigger position |
| Waveform Display | Vectors, Line, brightness adjustable |
| Graticules | 14 x 10, brightness adjustable |
| Waveform Update Rate | 130,000 wfms/s |
| Clock | Real time, user adjustable |
| Language | English, Chinese, German, French, Czech, Korean, Spanish, Italian, etc. |
Storage
| Storage Medium | Local, USB drive |
| Internal Storage | 32G |
| Waveform Storage Format | csv, wav, bin |
| Store Waveform Quantity | Unlimited |
| Stored Waveform Rename | Support |
| Reference Waveform Display | 4 internal waveforms |
| Quick Screenshot | Support |
| User Setting Storage | 10 internal setups |
| User Settings Rename | Support |
| USB Flash Drive | Support industry standard flash drives |
Input / Output Ports
| USB3.0 Port | Support one USB mass storage device, read and edit |
| USB2.0 Port | One, read and edit |
| USB Type-C | One, read and edit |
| DC Port | One |
| Probe Compensator | 1KHz, 2Vpk-pk |
| HDMI | HDMI 1.4 |
| Wi-Fi | Support |
| Android/iOS Remote Control Application | Support |
Power Source
| Power Voltage Range | 100~240VAC, 50/60Hz |
| Power Consumption | < 60W |
| Adapter Output | 12V DC, 4A |
| Battery | 7.4V, 7500mAh Li-ion battery |
Environment
| Temperature | Operating: 0°C ~ 45°C, Non-operating: -40°C ~ 60°C |
| Humidity | Operating: 5%~85% (25°C), Non-operating: 5% ~ 90% (25°C) |
| Altitude | Operating: < 3000m, Non-operating: < 12000m |
Physical Characteristics
| Dimensions (W x H x D) | 265*192*50mm |
| Weight | Net: 1.9kg (with battery), Shipping: 4.5kg |
Standard Accessories
| Passive Probe | Measuring voltage: 10X: < 600V AC pk, one per channel |
| Power Adapter | One (Localized) |
| Power Cord | One |
| Warranty | Three-year warranty for Base Unit only; probes, battery and related accessories are valid for 180 days |
Instrument Options
| Customized Battery (Standard) | 7.4V, 7500mAh Li-ion battery |
| Bus Decoding | Standard: UART, LIN, CAN, SPI, I2C; Optional: ARINC-429, MIL-STD-1553B |
| Recommended Accessory | Customized nylon handbag, hard shell suitcase, screen protective mask |
