Product Manual

1. Packing List

• Translator
• Type-C charging cable (note: without data transmission function, do not refer to it as a "data cable")
• Lanyard
• Instructions

2. Product Overview

The product overview section displays various angles of the Timekettle T1 Mini portable translator, highlighting its design and interface elements. The interface shows time, date, currency exchange rates, and travel phrases.

3. Basic Operations

Power on/off/restart

Press and hold the power button to turn on the translation machine. Press and hold the power button again to select power off/restart. For first-time use, activate the device according to the on-screen instructions.

Charge

Connect the Type-C charging cable to a standard charger (supporting 5V ⎓ 1A) to charge the translation machine.

Connect to the network

Connect to WIFI via [Settings Network and Connection WLAN], or use the device's built-in data service for independent communication. Note: After the built-in data service expires, it needs to be recharged.

Install the lanyard

Insert one end of the hanging rope into the hanging rope hole and pull the other end out from the hole on the opposite side. The pattern of the hanging rope may vary.

Gesture operation

1. Return to the superior page: Slide right on the left edge of the screen to return to the previous page.
2. Quick Settings Bar: Swipe down on the screen status bar to access the shortcut settings bar. From here, you can quickly turn on WIFI, fly mode, or enter [Settings].

4. Translating

One click translation

1. Select Language: Choose the other party's language and your own language on the homepage.
2. Turn on translation: Press and hold the recording button to speak. Release the button, and the translation machine will display and play the translation results.

Photo translation

1. Select Language: Before translating, select the source and target languages.
2. Adjust the camera: Position the translation machine so the desired text is in the middle of the screen, ensuring clarity and no tilt.
3. Photo translation: Click the photo button to scan and translate text.
4. Cross reference text: The button in the bottom left corner allows viewing the current image translation text.
5. Display Original/Translated Text: The button in the bottom right corner allows viewing the original or translated image.

Offline translation

After downloading the offline language pack, long press the button at the bottom of the screen to speak. The translation machine will display and play the translation results. Note: Offline language packs require WIFI connection for download.

Quick statement

1. When translating on the homepage or offline, sliding the screen upwards activates the shortcut statement function.
2. Customize content in [Settings Quick Statements].

5. Frequently Asked Question

Low translation accuracy?

This can be due to environmental noise affecting recording quality. Use in a quiet environment. Ensure you are close enough to the device for clear recording.

Display network exceptions?

Check if your data plan has expired. If using WIFI/mobile hotspot, ensure the connection is stable. Network conditions may be poor in areas like airports or suburbs; try areas with better signal coverage. If arriving in a new region, the device may take 5-10 minutes to search for a local network; be patient or restart the network. Ensure your region is supported by the device.

Is there a stuck or crashed situation?

Incorrect operation can cause crashes. Press and hold the power button for over 20 seconds to force a restart.

Does the translation machine consume too much power?

Poor network environments can lead to increased power consumption due to frequent network searches. Use in areas with good signal coverage or a stable WIFI connection.

6. Product Information

• Product Name: Portable Translator
• Product model: Timekettle T1 Mini
• Size: 91 * 54.8 * 13.1mm
• Processor: 4-core ARM 28nm 1.28GHz
• Storage space: 1G (RAM) 8G (ROM)
• Operating system: Android 10
• Screen size: 2.83 inches
• Resolution: 480 * 640
• Camera: 5 million pixels
• Microphone: Dual microphone array
• Speaker: single speaker
• Charging: Type-C 5V ⎓ 1A
• Battery capacity: 1500mAh
• Communication method: WIFI/traffic card (built-in)
• Network frequency band: 2G/3G/4G

7. Wireless technical parameters

8. Security Information

• Do not use unofficial charging methods to avoid fire, explosion, or other hazards.
• Avoid dropping, burning, squeezing, or immersing the product in liquid to prevent equipment damage.
• Do not expose the product to high temperatures or heating equipment.
• Use the product within 0-35°C and store it between -20-55°C. Temperature extremes may cause malfunction.
• Shenzhen Timekettle Technologies Co., Ltd is not responsible for issues caused by unofficial accessories.

9. Company Information

• Company Web: www.timekettle.co
• Customer service email: support@timekettle.co
• Manufacturer: Shenzhen Spacetime Pot Technology Co., Ltd
• Address: Room 612, Building 4, Private Enterprise Science and Technology Park, Pingshan 1st Road, Nanshan District, Shenzhen
• Copyright: Shenzhen Spacetime Pot Technology Co., Ltd

10. Warranty Card

Please keep the purchase evidence and warranty card as proof of warranty. From the date of purchase, quality issues during normal use within one year (or six months for accessories) are covered by free repair services with the purchase certificate and warranty card. Products purchased through authorized channels in Chinese Mainland are subject to the state's three guarantees policy.

Not covered by warranty:

• Normal wear and tear of the machine.
• Damage caused by not following instructions.
• Damage caused by uncontrollable human factors.

For faults caused by human factors, exceeding the warranty period, or uncontrollable factors, an appropriate repair fee will be charged. Please contact Shenzhen Timekettle Technologies Co., Ltd for service.

*If there are any changes to the above information, please refer to the official website announcement.

11. Warranty Regulations

Please refer to Section 10 for warranty details.

12. Safety Reminder

• If using a power adapter, ensure it is CCC certified and meets standard requirements.
• Attention: Improper battery replacement can lead to explosion risk. Only use batteries of the same or equivalent type.
• Batteries (battery packs or combination batteries) should not be exposed to sunlight, fire, or similar overheating environments.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting the dealer or an experienced radio/TV technician.

This Portable Translator meets the government's requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations. The standards include a substantial safety margin to assure the safety of all persons regardless of age or health.

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Portable Translator (FCC ID: 2AQ2G-T1MINI) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for when properly worn on the body is 1.057W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

IC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

The SAR limit of USA is 1.6 W/kg averaged over one gram of tissue. Device types: Portable Translator (IC: 26483-T1MINI) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for when properly worn on the body is 1.057W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with IC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with IC RF exposure requirements, and should be avoided.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. La limite SAR des États-Unis est de 1,6 W / kg en moyenne par gramme de tissu. Types d'appareil: Portable Translator (IC: 26483-T1MINI) a également été testé contre ces valeurs. La valeur SAR la plus élevée déclarée en vertu de cette norme lors de la certification du produit lorsqu'il est correctement porté sur le corps est de 1,057w/kg. Ce dispositif a été testé pour les opérations typiques portés sur le corps avec le dos du combiné gardé 10mm du corps. Afin de maintenir la conformité aux exigences de la IC, utilisez des accessoires qui maintiennent une distance de séparation 10mm entre le corps de l'utilisateur et le dos du combiné. L'utilisation de pinces de ceinture, étuis et accessoires similaires ne doivent pas contenir de composants métalliques dans son ensemble. L'utilisation d'accessoires qui ne satisfont pas à ces exigences ne peuvent pas se conformer aux exigences de la IC, et devrait être évitée.

Porté au corps Opération: Ce dispositif a été testé pour les opérations typiques portés sur le corps. Pour se conformer aux exigences d'exposition aux radiofréquences, une distance de séparation minimale de 10mm doit être maintenue entre le corps de l'utilisateur et le combiné, y compris l'antenne. Tiers pinces de ceinture, étuis et autres accessoires similaires utilisés par ce dispositif ne doit pas contenir de composants métalliques. accessoires qui ne répondent pas à ces exigences peut ne pas se conformer aux exigences d'exposition RF et doit être évité Body-porté. Utilisez uniquement l'antenne fournie ou une approbation.

Les opérations dans la bande 5.15-5.25GHz sont limitées à l'usage intérieur seulement.