Intelbras AMT Remoto Mobile Android Changelog
This document details the software updates and improvements for the Intelbras AMT Remoto Mobile Android application across various versions.
Version 2.1.0 (Released 02/07/2025)
- Implemented function to save registered panels.
- Implemented 'zone stay' indicator.
- Improved saving of digital tamper function for the 8000 line.
- Improved translation of the "single channel" function for IP cameras.
- Adjusted the IP Receiver account field to display in uppercase.
- Improved adding of PGM events for non-programming in AMT 1016.
- Fixed an issue in AMT 4010 5.7 where opening and restoration events (1342) were incorrectly handled due to power grid errors in the expansion module.
- Improved validation of intelligent zone time in AMT 2118 EG.
- Removed the option to enable connection via master password for AMT 8000.
- Adjusted the title of the phone screen in GPRS.
- Adjusted the explanation text in Spanish.
- Improved visualization of motion sensors in 8000 panels.
- Improved inactivity time validation in Smart panels.
- Improved translation for PGM activation in the push events screen.
- Removed the 'zone stay' indicator in 8000 models.
- Adjusted the display of the button function number in the controls screen.
- Improved abandonment time validation for IP cameras.
- Improved translation for the 'register device' button.
- Improved translation for entry and exit time.
Version 2.0.3 (Released 05/05/2025)
- Adjusted the description of the tamper event for 8000 line panels.
- Adjusted the reading of button functions for controls in Smart panels.
- Adjusted error messages in the timing tab in ANM 24 NET.
- Adjusted the visualization of cloud connection type in the Status screen.
- Improved validation of password expiration time.
- Improved the inactivity field to support 2 digits.
- Improved visualization of partition events in the 8000 line.
- Adjusted to prevent bypass or clearing of triggers with the panel armed.
- Improved the update process in boot mode.
Version 2.0.1 (Released 13/02/2025)
- Improved keep-alive time validation in camera configuration.
- Improved visualization of open or activated zones in ANM 24 NET.
- Improved panel search functionality.
- Adjusted to allow only 2 digits for siren time.
- Adjusted visualization of events in the 8000 line.
- Adjusted visualization of supervision failure events in the 8000 line.
Version 2.0.1 (Released 13/02/2025)
- Improved connection with panels.
- Implemented new event handling for the 8000 line.
- Implemented partition information in panel events.
- Implemented video channel configuration for cameras/recorders.
- Implemented new operating mode for IP Cameras in the 8000 line.
- Implemented an image indicator in Android for events containing photos.
- Improved visualization of tamper events based on device type in 8000 panels.
- Improved visualization of open zones in ANM 24 NET.
- Improved display of wireless device registration/removal function in AMT 1016 with version >= 2.4.
- Improved changing of connection password after user changes remote access password.
- Standardized the description of the siren event.
- Improved visualization of the holidays screen.
- Improved PIN validation for GPRS across all panels.
- Improved open door zone configuration in Smart panels.
- Improved configuration of control button functions in Smart panels.
- Improved holidays configuration in the 8000 line.
- Improved IP camera zone indexes for new panel versions.
- Improved error visualization when attempting to connect to a panel via IP Receiver if a connection with the account already exists.
- Improved reading of LED status for registered sensors in the 8000 line.
Version 2.0.0 (Released 11/02/2025)
- Menu reorganization.
- Implemented beep configuration for wireless sirens in AMT 8000 PRO and LITE models.
- Implemented open port function and configuration in AMT 8000 PRO and LITE.
Version 1.2.1 (Released 09/12/2024)
- Implemented disconnection message upon losing connection with the panel.
- Implemented reading of registered device positions in the 8000 line.
- Implemented cloud connection status information.
- Improved WiFi connection for ELC 6012 NET.
- Improved synchronization screen with date and time.
- Improved page loading mode.
- Improved navigation/menus.
- Improved siren time validation in ANM 24 NET.
- Improved reconnection process with the alarm panel.
- Improved title of the zone screen in ELC 6012 NET.
- Improved connection to ANM 24 NET G2 during updates.
- Improved IP address validation when attempting to connect.
- Improved adding of new wireless devices in AMT 2018 E3G.
- Improved visualization of keypad partitions in alarm panels.
- Improved visualization and saving of PGM event options in AMT 4010 Smart.
- Improved activation zone validation across all panels.
- Improved event visualization in ELC 6012 NET.
- Removed the option to fill WiFi networks using QR code.
- Improved SMS configuration and SMS event sending in AMT 2018 EG.
- Improved navigation after panel updates.
- Improved DTMF amplitude configuration read/write in AMT 2018 E3G.
- Improved reconnection process with panels.
- Improved telephone configuration read/write across all panels.
- Improved periodic test configuration read/write.
- Improved vacation configuration read/write.
- Improved weekday read/write for automatic activation and deactivation in the 8000 line.
- Improved date and time synchronization configuration read/write.
- Improved reading of events from alarm panels.
- Improved saving of keypad functions in alarm panels.
- Improved partition visualization in Stay mode for 8000 line panels.
- Improved firmware validation for updates.
- Improved keypad visualization in keypad partition configuration.
- Improved PGM screen and scheduled activation read/write for 8000 line panels.
- Implemented help button in the WiFi search screen.
- Improved event reading in 8000 line panels.
- Improved medical emergency registration in AMT 1016 Net.
- Improved event reading in ANM 24 NET G1 and G2.
Version 1.2.0 (Released 26/11/2024)
- Improved visualization of connected XG in alarm panels.
- Removed WiFi DHCP configuration option in the 8000 line.
- Implemented error message for activating Stay complete without partial zones in the 8000 line.
- Improved connection via IP Receiver using DNS.
Version 1.2.1 (Released 09/12/2024)
- Improvements when importing IP camera data via IP Receiver.
- Improvements when importing timed PGM field in ELC 6012 NET.
- Improvements in battery status visualization for 8000 line panels.
- Adjustments in PGM time field read/write.
Version 1.2.0 (Released 26/11/2024)
- Improvements in Smart panel arming/disarming messages.
- Implemented language configuration in AMT 8000 PRO.
- Implemented network search for percentage and number of found devices.
- Implemented real-time reporting configuration for ELC 6012 NET.
- Improved connection in 8000 panels.
- Adjusted battery status in 8000 panels.
- Adjusted AC fault reporting time validation.
- Adjusted siren volume configuration in AMT 8000 LITE/PRO panels.
- Adjusted programmed PGM schedule.
- Improved saving of the general screen for the ELC 6012 NET central.
- Adjusted to display warnings on the IP camera screen.
- Improved downloading of data from IP cameras.
- Improved display for all users when registering/removing panic devices in 2018 E3G.
- Improved login with IP field containing spaces.
Version 1.1.0 (Released 26/09/2024)
- Improvements in event photo visualization.
- Adjustments to panel disarming messages.
- Adjustments to inactivity time validation in Smart panels.
- Improvements to remove special characters when saving configurations.
- Removed periodic test function via telephone line for AMT 8000 Lite.
- Improvements in periodic test schedule validation.
- Improvements in connection visualization to the 8000 line via master password.
Version 1.0.52 (Released 11/06/2024)
- Adjustments in sensor visualization for the 8000 line.
- Adjusted to prevent the Master Password field from being sent empty in ELC 6012 NET panels.
- Improvements in Date and Time visualization.
- Adjustments in sending data to ANM 24 NET G2 panels.
- Improvements in message and alert visualization.
- Removed beep configuration XAC/XAT in AMT 1016.
- Improvements when connecting to ELC 6012 NET energizers.
Version 1.0.51 (Released 03/06/2024)
- Implemented warning message to update panels.
- Adjusted to display intelligent zone time in AMT 24 NET panels.
- Adjusted PGM mode configuration storage in Smart panels.
- Adjusted visualization of remote control arming events in Smart panels.
- Adjusted zone information reading in Smart panels.
Version 1.0.50 (Released 13/05/2024)
- Implemented a message warning the user about the need to enable cloud connection for panel updates in the 8000 line.
- Adjustments to allow users to update 8000 line panels via IP Receiver.
- Adjustments to search for the correct version to update AMT 8000 panels via IP Receiver.
Version 1.0.49 (Released 02/05/2024)
- Implemented improvements in network panel search.
Version 1.0.48 (Released 26/04/2024)
- Implemented blocking of the screen update button when searching for panels on the network while the search is in progress.
Version 1.0.46 (Released 21/03/2024)
- Implemented privacy policy updates.
- Implemented screen update button when searching for panels on the network.
- Improvements to increase panel search time on the network.
- Displays comments to the user on the network search center screen.
Version 1.0.46 (Released 21/03/2024)
- Implemented validation for the master password field when empty.
- Unified PGM screen for ANM 24 NET panels.
- Implemented keypad message lock configuration for AMT 2018 E3G panels.
- Implemented activation zone configuration for AMT 2018 E3G panels.
- Implemented periodic test configuration via telephone line in AMT 8000 PRO panels.
- Implemented XAC/XAT beep configuration for AMT 2118 panels.
- Implemented PGM partition configuration for AMT 2018 E Smart and AMT 1000 Smart panels.
- Implemented panel Tamper configuration for AMT 8000 LITE panels.
- Implemented Digital Tamper sensor configuration for the 8000 line.
- Implemented timezone configuration for AMT 1016 NET panels.
- Implemented opening and closing events for AMT 2018 E Smart and AMT 1000 Smart panels:
- 1134 - Open door alarm.
- 3134 - Open door alarm reset.
- Implemented keypad partition configuration for AMT 2018 E Smart with Version 2.7 or higher.
- Implemented FXO 8000 profile configuration for AMT 2018 E Smart with version 2.7 or higher.
- Implemented zone option with open time zones for AMT 2018 E Smart and AMT 1000 Smart panels with Version 2.7 or higher.
- Implemented open door time configuration for AMT 2018 E Smart and AMT 1000 Smart panels with version 3.0 or higher.
- Implemented zone as Open Door for AMT 2018 E Smart and AMT 1000 Smart panels with Version 3.0 or higher.
- Increased the maximum number of IP monitoring ports for AMT 2018 E Smart and AMT 1000 Smart panels with version 2.7 or higher.
- Implemented 'Ethernet then GPRS' priority as the sole priority for AMT 2018 E Smart and AMT 1000 Smart panels with version 2.7 or higher.
Version 1.0.46 (Released 21/03/2024)
- Implemented 'Solo 2G' configuration in the GPRS tab for AMT 2018 E Smart and AMT 1000 Smart panels with version 2.7 or higher.
- Implemented automatic Stay partition activation configuration for AMT 2018 E Smart and AMT 1000 Smart panels with Version 2.7 or higher.
- Implemented inactivity time configuration in minutes or hours for AMT 2018 E Smart and AMT 1000 SMART panels with version 2.7 or higher.
- Implemented sending of programming resets for AMT 2018 E Smart and AMT 1000 SMART panels with Version 3.0 or higher.
- Implemented 'no programming' event in the PGM tab for AMT 2018 E Smart and AMT 1000 SMART panels with Version 3.0 or higher.
- Improvements in inactivity field validation in ANM 24 NET.
- Text adjustments.
- Removed partition configuration in PGM for AMT 1000 SMART panels.
- Adjustments to the message box.
- Improvements for Stay in AMT 4010.
- Adjustments to battery restoration text in ANM 24 NET.
- Adjustments in the visualization of some tabs for AMT 8000 LITE and PRO panels.
- Adjustments to change profiles in AMT 4010 v1.9.
- Improvements for date and time adjustment in the 8000 line.
- Improved visualization of partitions in Stay mode (all panels).
- Improved visualization of save/discard buttons in the test mode tab on AMT 8000 PRO panels.
- Improvements to change panel time according to phone time in English.
- Improvements in reading and saving telephone line profile information for AMT 4010 panels.
- Improvements in siren list visualization for AMT 8000 panels.
- Improvements in saving the general tab on other panels.
- Improvements in subtitle visualization in the online tab.
- Improvements in Stay button visualization on AMT 2018 E Smart, AMT 1000 Smart, and AMT 4010 panels.
- Improvements in storing general tab configurations for AMT 4010 Smart v5.7 panels.
- Improvements in storing panel date and time according to phone date and time.
- Improvements in activation zone storage for AMT 1000 Smart panels.
- Adjustments to the default password field for numeric type, so that letters cannot be entered in numeric-only passwords.
- Text and color improvements in Android.
- Improvements to timezone reference in ANM 24 NET.
- Improvements in the tutorial for searching for an energizer on iPhone. In the last step, upon clicking next, the application will attempt to connect to the panel.
Version 1.0.46 (Released 21/03/2024)
- Adjustments to open screens to view images in the events tab.
