HOOVER

Getting Started

1. Step 1:Plug in your Steam Complete Pet and turn it on. Allow 60 seconds for your unit to heat up, and adjust both dials to your desired setting.
2. Step 2:Adjust steam dial to desired setting. Utilize the Supplemental water tank by turning the dial to 'large area' when cleaning large spaces and turn the dial to 'small area' for quick cleaning.
3. Step 3:Pull trigger in short bursts to produce steam and clean. To prevent over-saturating floors, avoid holding down the trigger continuously.

PRO TIPS

• To Engage SteamStream:Press the button on the floor head to activate, and squeeze the trigger to release the steam. Press the button again to deactivate.
• To Release the Tile and Grout Scrub Brush:Place your foot on the outer floor head and gently pull away the steam cleaner.
• For Best Performance:Use distilled water.

Tools for Every Mess

Removing the Handheld

• Lift the release button and gently pull away from the steam cleaner.

TIP:Remove the main water tank and fill before use.

Using Accessories

Using Small Accessories

• Small tools can be attached with the concentration nozzle. Twist clockwise until locked into position.

Using Large Accessories

• Larger tools can be attached with the concentration nozzle or hose. To attach the hose, twist clockwise until locked into position.