ZAZU Baby Sleep Shusher

Product Overview

The ZAZU Baby Sleep Shusher is a plush toy designed to help babies sleep. It features adjustable light, various sounds, and the ability to record custom messages. The product is designed to be safe and compliant with relevant regulations.

The device has a light module located in the belly of the plush toy. It is operated by several buttons:

• Button A: Selects the playback mode (OFF, Light only, Light and music).
• Button B: Adjusts the volume (3 settings: loud, medium, soft).
• Button C: Turns the cry sensor ON/OFF.
• Button D: The main power button to turn the product ON/OFF, change songs, and record messages.

The plush toy can be hand-washed after removing the light module.

How to Use

Battery Installation:

• Remove the light module from the belly of the plush toy.
• Insert 3x AAA batteries (not included).
• Ensure only alkaline batteries are used; avoid zinc-carbon batteries.

Operating the Sleep Shusher:

• Select Playback Mode: Use Button A to choose between OFF, Light only, or Light and music.
• Activate Cry Sensor: Use Button C to turn the cry sensor ON/OFF. When activated, the sensor will automatically play the last used settings when your baby starts crying. The cry sensor remains active for 12 hours.
• Turn Product ON/OFF: Press the large Button D. The sound and music will automatically turn off after 20 minutes.
• Adjust Volume: Use Button B to select one of three volume levels: loud, medium, or soft.
• Change Songs: Double-press Button D to cycle through different melodies: heartbeat, white noise, shusher, lounge music, lullabies 1,2,3, and recorded songs.
• Record Your Own Message: Press and hold Button D. When you hear a beep, start recording your message (up to 30 seconds). Release the button when finished; another beep will confirm the recording is complete.

Safety Guidelines

Important! Keep these instructions for future reference.

• This ZAZU product is fully compliant with EU, CA, AU, NZ, RU, CN, and USA legislation.
• Keep the packaging out of reach of children.
• Ensure the product is kept out of reach of small children and never allow your child to play with the batteries.
• This product requires 3x AAA 1.5 V batteries (not included).
• Use only the specified batteries.
• Remove empty batteries from the module promptly.
• Batteries should only be installed by adults.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
• When the product is not in use, switch it OFF completely.
• Do not place the plush toy inside the cot or too close to the baby.
• The plush toy can be hand-washed and air-dried after removing the light module.
• The light emitted by the module does not get warm.