JARNEX Setup Guide
Outdoor Wall Lantern Camera
Welcome to JARNEX Smart Camera Setup
Thank you for choosing the JARNEX Smart Camera. This quick start guide will swiftly guide you through setup and installation. Let's get started!
App Setup
Download the free JARNEX app from the App Store or Google Play Store. Open the app, tap 'Sign Up,' and follow the on-screen instructions to set up your account.
Connect the cell phone to the 2.4 GHz or 5 GHz WiFi network and ensure Location and Bluetooth are enabled.
Light Indicator:
- High Flashing Blue: The camera is connecting to network
- Low Flashing Blue: The camera is in connecting mode
- Light OFF: The camera is successfully connected
Diagram: A visual representation shows the camera with labels pointing to the Indicator Light, Lens, Built-in Mic, Reset Button, and Micro SD Card Slot.
Add Device
Open the JARNEX app, log in, and select 'Add Device' from the menu by tapping the '+' icon located at the top-right corner of the screen.
Navigate to the top of the screen, allowing a few moments for the camera detection process. Once the lantern camera appears, select it and confirm that the indicator light continues blinking.
Ensure that the displayed WiFi network corresponds to your 2.4 GHz or 5 GHz network. Enter your WiFi password, then click "Next". Allow a few seconds for the process, and upon completion, the message 'Added successfully' will appear.
Diagram: A visual shows the app interface with options like 'Add Device', 'Create Scene', and current environmental readings (temperature, air quality).
Specifications
| Product Name | Outdoor Lantern Camera |
| Display Resolution | HD: 2560 x 1440 SD: 640 × 360 |
| Working Stream | Main Stream: 1.5 Mbps Sub Stream: 500 Kbps |
| Wi-Fi Network | IEEE 802.11 a/b/g/n/ac |
| Network Transmission | 2.4 G/5 GHz wireless network |
| Network Protocol | WPA and WPA2 encryption |
| Onvif | Support |
| Micro SD Card (TF Card) | Maximum 256 GB |
| Pan/Tilt | APP control 220° / Manual 35° |
| Power Supply | 110 V~220 V 60 Hz |
| Working Temperature | -4 °F ~ 140 °F (-20 °C ~ 60 °C) |
| Working Humidity | ≤95% |
Diagram: An illustration shows a mounting bracket with screw holes and directional arrows indicating adjustment possibilities.
Frequently Asked Questions
Q: How do I connect my lantern wall light camera to the network?
A: To ensure a smooth setup, keep your camera, smartphone, and Wi-Fi router close together during the pairing process. The camera supports both 2.4GHz and 5GHz Wi-Fi networks. Double-check that you've entered the correct Wi-Fi name (SSID) and password. If the connection fails, press and hold the reset button on the camera for 10 seconds to reset the device, then try the pairing process again.
Q: How can I view playback from my lantern wall light camera?
A: You have two options for viewing recorded footage: Local Storage: Insert a Jarnex MicroSD card into the camera to store recordings locally. Cloud Storage: Subscribe to the Jarnex cloud service for online access to your recordings. Once storage is set up, you can view event-based clips or continuous 24/7 footage directly through the Jarnex App.
Q: How do I turn push alarm notifications on or off for the camera?
A: First, make sure notifications are enabled for the Jarnex App in your phone's system settings. To manage motion or sound detection alerts, open the Jarnex App and tap the alarm icons on the main Features screen to quickly toggle notifications. For more detailed control, tap the three-dot menu in the top-right corner and select Detection Alarm Settings. From there, you can easily customize your alert preferences.
Q: How can I share my lantern wall light camera with family members?
A: You can choose to share a single camera or all cameras linked to your home. To share a specific camera, open the Jarnex App, go to the camera's detail page, tap the three-dot menu, and select the Share Device icon. To share all cameras in your home, go to Management at the bottom of the app, select Home Management, choose your home, then tap Add Member. You can also manage each member's access permissions from this section.
Q: How can I adjust the angle of the lantern wall light camera?
A: There are two ways to adjust the camera angle. For horizontal movement, open the Jarnex App and either swipe on the live view screen or use the Direction icon to pan the camera. For vertical adjustment (tilt), manually reposition the camera to achieve the optimal viewing angle.
Q: How do I set up Night Mode for the lantern wall light camera?
A: The Jarnex App offers two Night Mode options: Smart Mode: The light turns on only when motion is detected at night. This is an energy-efficient, environmentally friendly option. D2D Mode (Dusk-to-Dawn): This recommended mode automatically turns the light on at dusk and off at dawn, or when it's dark and overcast. You can also manually control the light at any time through the Jarnex App.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Reminders
- Ensure the power is off at the breaker before attempting installation.
- Use a sturdy ladder or step stool if installation is out of reach.
- Avoid installing the camera in areas where the privacy of others may be compromised.
- Keep the camera continuously powered to maintain recording functionality. Be aware that any interruptions in power supply will halt recording activities.
- Adhere to local laws and regulations regarding surveillance and recording, especially in public or semi-public spaces.
Visit the JARNEX website at www.jarnex.com for additional information and resources.
JARNEX