About camera

1.1 Product introduction.

This is a HD IP camera for monitoring. It connects to the Internet to send and receive data, you can use it to remotely view real-time images from your mobile phone, computer or other device anytime and anywhere. It can save surveillance videos in the Micro SD card, computer or other device. The camera also supports alarm functions such as sending alarm emails, alarming phone message push and other functions.

1.2 Product should contain:

• IP Camera
• Power adapter
• User manual
• Network cable
• WIFI Antenna
• Screws bag

[Diagram of camera components: 1 IP Camera, 2 Power adapter, 3 User manual, 4 Network cable, 5 WIFI Antenna, 6 Screws bag.]

1.3 Product interface.

The camera features a Reset Button, Power input, and RJ45 Interface.

Connect camera

2.1 Connect network cable to router and plug in power adapter.

The router must be able to connect to the Internet! Please use the standard power supply.

[Diagram of a router with multiple ports, a power adapter plugged into a wall socket, and a network cable.]

2.2 Connect network cable and power to the camera.

It needs about a few minutes to self-check and then start working. The network indicator light (green) will be always flashing, which means network data transmission is normal. The camera will turn on AP mode when it is only connected to the power supply. You can connect the camera via the AP mode.

[Diagram showing cable connections for power and network.]

View via mobile phone

3.1 Download “CamHipro" from Google Play Store / Apple App Store or scan the QR code below to get APP information.

[QR code for Android app] [QR code for iOS app]

3.2 Run APP and Add Camera.

• Connect the wireless antenna to the camera and power it on.
• Wait 30 seconds, go to settings and find the hotspot (IPCAM-XXXXXX) from the camera, enter password ‘01234567' to connect.

Open the APP ‘CamHiPro', click ‘Add Camera' to add a new device. Follow the steps to add 'AP equipment'.

[Phone screenshot showing Wi-Fi network selection with 'IPCAM-XXXXXX' as a hotspot.]

Wireless configuration

Connect to your own Wi-Fi nearby. Wait 30~40 seconds, the camera will connect to your Wi-Fi automatically. Connect camera successfully.

[Phone screenshots showing the 'CamHiPro' app interface for adding a camera via AP mode, and then configuring wireless settings.]

3.3 After adding the camera, click online camera to view real-time image.

[Phone screenshot showing the camera view with an annotation 'click here to monitor'.]

View via PC

4.1 Install the “Search tool", then run it to find the cameras.

Click "[search_setup icon]" to install the search tool. After installation, click "[Search Tool icon]" to run it. Click "[Refresh button]" to find the camera. Double-click camera information to run the browser and access the camera.

[PC screenshot of the "Search tool" software with annotations "1. Click 'Refresh' to find the camera" and "2. double click camera information to run browser to access the camera".]

Click "Next" to modify network parameters of the camera. The software finds available network settings for the IPCamera automatically. Default user name: admin, Default password: admin.

[PC screenshot showing network parameter settings with default credentials 'admin/admin'.]

4.2 Access to the camera via browser on windows PC.

In the browser, you can view and configure all parameters of the camera. If you are not using IE browser, some settings will be missing.

[PC screenshot of the IP CAMERA browser interface.]

4.3 Connect and manage multiple cameras via CMS on windows PC!

[PC screenshot showing multiple cameras managed via CMS software.]

Set WIFI

5.1 Set WIFI on phone.

1. Click here to enter setting page. 2. Click "Wi-Fi Setting". 3. Select Wi-Fi and enter password.

[Phone screenshots showing steps to set Wi-Fi in the 'CamHiPro' app.]

5.2 Set WIFI via browser on PC.

Enter the "wireless" page. Enable Wireless: [On/Off toggle]. SSID: [Input field]. Security mode: [Dropdown]. WPA Algorithm: [Dropdown]. Key: [Password input field]. Re-type key: [Password input field]. Check Wireless Setup: [Check button]. Click "Apply" and then "Save settings".

[PC screenshot showing Wi-Fi settings via browser.]

The Wi-Fi connected to the camera must have a signal value greater than 50% and the Wi-Fi name must be in English and cannot contain special characters. After the Wi-Fi setting is completed, the camera will automatically switch to the Wi-Fi connection when the network cable is unplugged.

Set Micro SD card record

6.1 TF card needs to be formatted first and installed on the camera correctly.

It is recommended to use TF card above Class 10.

6.2 Set motion detection alarm recording on the phone.

1. Open the "Motion Detection". 2. Open the "Alarm SD REC". 3. Check the SD card is available. Motion detection alarm recording is recommended when the Micro SD card is small.

[Phone screenshots showing steps for motion detection alarm recording.]

6.3 Set schedule recording on phone.

1. Open "Enable Record". 2. Check the SD card is available.

[Phone screenshots showing steps for schedule recording.]

6.4 Playback record on phone.

1. Click here to enter record page. 2. Click online camera. 3. Play or download video files.

[Phone screenshots showing steps for playback.]

These parameters can be set in more detail via IE browser on the PC!

Reboot and restore factory settings

7.1 Reconnect the power to restart the camera.

[Image of a power cable connecting to the camera.]

7.2 Press and hold the reset button for 15 seconds and the camera will restore to factory settings.

Also, you can restart or reset the camera via mobile phone or PC.

[Image of a reset button on a cable with an arrow pointing to it.]