V-TAC LED Designer Hanging Light

Technical Data

This product comes with a 02 YEAR WARRANTY*.

Introduction & Warranty

Thank you for selecting and buying a V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any further queries, please contact your local dealer or vendor. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

WARNING!

• Please make sure to turn off the power before starting the installation.
• Installation must be performed by a qualified electrician.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life, the whole luminaire shall be replaced.
• Proper grounding should be ensured throughout the installation.
• For Indoor Use only

Installation Diagram

The installation diagram illustrates the mounting process. It shows a ceiling junction box where a mounting bar is fixed. The light fixture's suspension cables are then attached to this bar, and the electrical wires (Live, Neutral, and Earth) are connected. Finally, the canopy is secured to the mounting bar.

Note: This light is designed with adjustable height, press the pin on the canopy to adjust the height of the light.

Wiring Diagram & Instructions

The wiring diagram specifies the connections for the electrical supply:

• ?Neutral Supply (N): Can be Blue or Black wire.
• ?Ground Supply: Can be Green-yellow wire.
• ?Live Supply (L): Can be Red or Brown wire.

Installation Steps:

1. Switch off the power before starting the installation.
2. Use screws to fix the mounting bar to the junction box.
3. Make the wire connections using connectors:
   • Connect the live wire (L) from the fitting to the live wire from the main power supply.
   • Connect the neutral wire (N) from the fitting to the neutral wire from the main power supply.
   • Connect the earth wire from the fitting to the earth wire from the main power supply.
   Please pay close attention and make sure the wires are not exposed outside when making wiring connections.
4. Use screws to fix the canopy to the mounting bar.
5. Check if the installation is completed and turn on the power to test.

Symbols and Disposal Information

This product is marked with several symbols indicating its features and compliance:

• ?Replaceable control gear by a professional: Indicates that the control gear can be replaced by a professional.
• ?Replaceable (LED only) light source by a professional: Indicates that the LED light source can be replaced by a professional.
• ?Not Dimmable: This light cannot be dimmed.
• CE, UKCA, RoHS: Compliance marks indicating adherence to European, UK, and Restriction of Hazardous Substances standards, respectively.
• ?PAP: Indicates paper packaging.
• ⚠️Warning: General warning symbol.
• ⚡Caution, risk of electric shock: Indicates potential electrical hazard.
• ?️Do not dispose of with other household wastes: This marking indicates that the product should not be disposed of with other household wastes. Electrical and electronic equipment should be disposed of separately at designated collection points.

Disposal Advice: Electrical and electronic equipment that has become waste is referred to as waste equipment. Waste equipment must not be disposed of with other household waste. Owners of waste equipment must return the equipment to the facilities set up by public disposal authorities or dealers. This return is free of charge for you. Owners of waste equipment are obliged to remove lamps from the waste equipment before returning them. For the disposal of electrical equipment in landfills or dumps, pollutants can enter groundwater and enter the food chain and harm your health and well-being.

For the online directory of collection and return points, please visit: https://www.ear-system.de/ear-verzeichnis/sammel-und-ruecknahmestellen