Clarke CS400D Digital Safe

Introduction

Thank you for purchasing this CLARKE Digital Safe. Before attempting to operate the safe, it is essential that you read this manual thoroughly and carefully follow all instructions given. In doing so you can look forward to the safe giving you long and satisfactory service.

Guarantee

This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase; no product can be returned without prior permission. This guarantee does not affect your statutory rights.

Specifications

Replacement Override Key

A small label is located on the front of each safe with a key number. The number will start with either the letter "J" or "G" followed by several digits. This number must be registered with Clarke International in the event you require a replacement key.

Please complete the registration form at the back of this manual and send it to the address stated with the form. If you fail to register the safe, Clarke International will not be able to provide you with a replacement key.

We recommend that in addition to sending the completed form, you remove the label from the safe and fix it to the space below. Please retain this document for future reference.

Fix or record the key number here: [Key Number Area]

Contact: Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

Before Use

Programming the Code

1. With the safe door open and the batteries installed.
2. Press and release the red button on the rear of the lock housing. You will hear two beeps, and the yellow light will be on at the same time.
3. Enter the code you want to use (3-8 digits) as a combination.
4. Confirm within 15 seconds by pressing the letter "A" or "B". The safe will beep twice, and the yellow light will go off, indicating your personal code is now set.
5. Test the safe using the new combination immediately.

Using Your Safe

Declaration of Conformity

This document declares that the product complies with relevant EU directives (Electromagnetic Compatibility Directive, Restriction of Hazardous Substances) and UK legislation (Electromagnetic Compatibility Regulations 2016, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012).

Applied standards include EN 61000-6-3:2007+A1:2011, EN 61000-6-1:2009, BS EN 61000-6-3:2007+A1:2011, and BS EN 61000-6-1:2009.

The CE mark was first applied in 2009, and the product was placed on the market in 2009.

Product Description: Digital Safe

Model Numbers: CS300D, CS400D, CS600D (also CS150F, CS300K, CS400FP, CS490F listed in registration form).

Date of Issue: 09/03/2021

Signed by: J.A. Clarke, Director.

Important Information for Replacement Keys

IMPORTANT: In order to obtain a replacement key, please detach and complete the safe registration form (see reverse of this document) and return it to:

Note on Registration Form: The registration form requires identification of the key number before the safe is installed. Failure to register may prevent the provision of a replacement key. Fields include Model Number, Name, Company, Address, Contact details, Purchase Details, and Key Number.