Installation Guide for HANECO models including: SLFGPS61840120D, SLFGPL61840120D, SLFGPS61840120D FoodGrade High Bay, SLFGPS61840120D, FoodGrade High Bay, High Bay, Bay
SKYLUX FG PRO | Products | LED Lighting Australia
File Info : application/pdf, 4 Pages, 783.51KB
DocumentDocumentSKYLUX-FGPRO FoodGrade Highbay Optional sensor is NOT included INSTALLATION GUIDE · Please read instruction carefully before assembling and installation · Please keep instruction as reference in the future SKYLUX FoodGrade PRO Highbay WARNING INSTALLATION GUIDE 1. Ensure that any installation and maintenance be performed by a qualified electrician and the luminaire is wired in accordance with the local wiring and relevant Australia standards. 2. Ensure that the power supply is off before starting installation and maintenance. Do not switch on until the installation or maintenance is completed. 3. The light source of this luminaire is non-user alternative light source, the light source contained in the luminaire shall only be replaced by the manufacturer of his service agent or a similar qualified person. 4. Make sure the products are grounded. 5. Power supply system should be equipped with SPD (Surge Protection Device) accordance with electrical regulations. 6. The products are suitable for indoor and semi-outdoor use with roof covers. It can be rinsed directly with water. 7. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 3m is not expected. PRODUCT SPECIFICATION Ø H PROUCT CODE SLFGPS61840120D SLFGPL61840120D SKYLUX FOOD GRADE HIGHBAY PRO SKYLUX FOODGRADE PRO HIGHBAY 60/80/100W 840 120D C/W SEN HACCP SKYLUX FOODGRADE PRO HIGHBAY 120/140/160W 840 120D C/W SEN HACCP ø (mm) 300 345 H TRI- Weight Voltage Maximum IP (mm) Wattage (kg) (v) load (W) (kg) 127 60W/ 2.5 220- 10 65 80W/ 240Vac 100w 50Hz/ 60Hz 138 120W/ 140W/ 160W 3.1 220- 240Vac 50Hz/ 60Hz IK ta 08 -25°C -50°C Specification and imagery subject to changes without prior notification. Modification date: February 20, 2025 9:37 AM @2024 HANECO LIGHTING PTY LTD. ALL RIGHT RESERVED SKYLUX FoodGrade PRO Highbay INSTALLATION 1. Securely fasten the eyebolt to the body of SKYLUX FG higbay Pro. INSTALLATION GUIDE 2. To change the wattage settings, loosen the sealing cap using a spanner. Skip this step if you prefer to use the default output. Dip Switch 3. Adjust the lighting level to your desired lumen output using the lumen select switches. If you're using the default output, disregard this step. Dip Switch Instructions SKYLUX FOODGRADE PRO HIGHBAY 60/80/100W SKYLUX FOODGRADE PRO HIGHBAY 120/140/160W WATTAGE SWITCH SETUP WATTAGE SWITCH SETUP WATTAGE +SENSOR SWITCH SETUP WATTAGE +SENSOR SWITCH SETUP Specification and imagery subject to changes without prior notification. Modification date: February 20, 2025 9:37 AM @2024 HANECO LIGHTING PTY LTD. ALL RIGHT RESERVED SKYLUX FoodGrade PRO Highbay 4. Securely tighten the sealing cap using a flat-head screwdriver. Disregard this step if you're using the default output. INSTALLATION GUIDE 5. Hang the luminaire by the suspension ring, attaching it to a fixed safety hook or closed link chain. 6. Connect the wires as shown in the diagram to activate the light. ACCESSORY (NOT INCLUDED) PRODUCT CODE SLFGPSENSOR SLFGPSENRTE SLFGPCRL SLFGPL60300 SLFGPL60345 SLFGPL90300 SLFGPL90345 DESCRIPTION SKYLUX FOODGRADE PRO HIGHBAY ZHAGA SENSOR SKYLUX FOODGRADE PRO HIGHBAY SENSOR REMOTE SKYLUX FOODGRADE PRO HIGHBAY PC REFLECTOR - UNIVERSAL SKYLUX FOODGRADE PRO HIGHBAY LENS: 60º (60/80/100W FIXTURE) SKYLUX FOODGRADE PRO HIGHBAY LENS: 60º (120/140/160W FIXTURE) SKYLUX FOODGRADE PRO HIGHBAY LENS: 90º (60/80/100W FIXTURE) SKYLUX FOODGRADE PRO HIGHBAY LENS: 90º (120/140/160W FIXTURE) SERVICE CONTACT: Haneco Lighting Australia Pty Ltd 262 Marion Road, Netley, South Australia 5037 Haneco.com.au 1300 001 533 Specification and imagery subject to changes without prior notification. Modification date: February 20, 2025 9:37 AM @2024 HANECO LIGHTING PTY LTD. ALL RIGHT RESERVED