JBL Flip 6 Quick Start Guide

What's in the Box

The box contains the JBL Flip 6 speaker and a USB-C charging cable.

Bluetooth Pairing

To pair your device with the JBL Flip 6:

1. Press the Bluetooth button on the JBL Flip 6.
2. On your device, go to Bluetooth settings, turn Bluetooth on, and select 'JBL Flip 6' from the list of available devices.

Play

Control playback using the buttons on the JBL Flip 6:

• Press the play/pause button once for play/pause.
• Press the play/pause button twice to skip to the next track.
• Use the volume up and down buttons to adjust the volume.

PartyBoost

Connect multiple JBL PartyBoost-compatible speakers for a louder sound experience. Press the PartyBoost button on each speaker to link them.

JBL Portable App

Download the JBL Portable app to configure your speaker and upgrade its software. The app is available on the Google Play Store and the Apple App Store.

Charging

Connect the USB-C charging cable to the JBL Flip 6 and a power source. The battery indicator will show the charging status. A full charge takes approximately 2.5 hours.

Waterproof and Dustproof (IP67)

The JBL Flip 6 is waterproof and dustproof with an IP67 rating. It can be submerged in up to 1 meter of water for 30 minutes. Ensure the charging port cover is securely closed before exposing the speaker to water.

Technical Specifications

• Transducers: 45 x 80 mm woofer / 1.75 x 3", 16 mm tweeter / 0.6"
• Output power: 20 W RMS for woofer, 10 W RMS for tweeter
• Frequency response: 63 Hz - 20 kHz
• Signal-to-noise ratio: > 80 dB
• Battery type: Li-ion polymer 17.28 Wh (equivalent to 3.6 V / 4800 mAh)
• Battery charge time: 2.5 hours (5 V / 3 A)
• Music play time: Up to 12 hours (dependent on volume level and audio content)
• Cable type: USB – C charging cable
• Cable length: 1.2 m / 47.2"
• Bluetooth® version: 5.1
• Bluetooth® profile: A2DP 1.3, AVRCP 1.6
• Bluetooth® transmitter frequency range: 2400 MHz - 2483.5 MHz
• Bluetooth® transmitter power: ≤ 10 dBm (EIRP)
• Bluetooth® transmitter modulation: GFSK, π/4 DQPSK, 8DPSK
• 2.4GHz SRD frequency range: 2407 MHz - 2475 MHz
• SRD transmitter power: < 10 dBm (EIRP)
• Product dimensions (W x H x D): 178 mm x 68 mm x 72 mm / 7.0" x 2.6" x 2.8"
• Net weight: 0.55 kg / 1.21 lbs
• Packaging dimensions (W x H x D): 216 mm x 106 mm x 99 mm / 8.5" x 4.2" x 3.9"
• Gross weight: 0.92 kg / 2.05 lbs
• Maximum operation temperature: 45 °C

Important Safety Information

To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

Do not expose the JBL Flip 6 to liquids without removing the cable connection. Do not expose JBL Flip 6 to water while charging. It may result in permanent damage to the speaker or power source.

Chemicals and salt in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if not rinsed off after use. After a liquid spill or rinse, do not charge your speaker until it's completely dry and clean. Charging when wet might damage your speaker.

With USB-C charging protection, a reminder sound will alert you to unplug if the connector detects water, salt, or any other chemicals.

When using an external adapter, the output voltage/current of the external adapter should not exceed 5V/3A.