Daikin Wired Remote Controller Operation Handbook
Model: BRC1H62W/BRC1H62K
Button Locations and Descriptions
The remote controller features the following buttons and indicators:
- LCD: The main display screen.
- Status indicator (LED): A light ring around the display that indicates operation status: Blue for operating, Blinking red for error, Lights up/blinks green for Bluetooth connecting.
- ON/OFF button: Press to turn the system on or off.
- NAVIGATE/ADJUST button (Left): Navigate left or adjust a setting.
- NAVIGATE/ADJUST button (Right): Navigate right or adjust a setting.
- SELECT/ACTIVATE/SET button: From the home screen, enter the main menu. From the main menu, enter submenus. From submenus, activate an operation or ventilation mode.
Information Screen
About Icons on the Information Screen
The current status is displayed with icons. The items displayed vary depending on the indoor unit.
| Icon | Name | Description |
|---|---|---|
| [info-icon] | Information screen | Indicates an information screen. |
| [main-sub-icon] | MAIN/SUB remote controller | Displayed when used as the MAIN/SUB remote controller (1=main, 2=sub). |
| ? | Bluetooth | Indicates that the controller is communicating with a mobile device, for use with the app. |
| ❄️ | Setback | Indicates that the indoor unit is operating under setback conditions. A function to keep the room comfortable when the AC is off by automatically turning on the unit when the temperature exceeds the setback setpoint. |
| ? | Centralized Control | Indicates that the system is controlled by central control equipment (optional accessory) and that control of the system by the controller is limited.
|
| ? | Changeover Under Control (VRV only) | Displayed when the controller is unauthorized to select heating/cooling operation. |
| ? | Backup | Indicates that backup operation is being carried out. |
| ? | Energy savings | Indicates that the system's energy consumption is being limited, and that it is running with restricted capacity. |
| ⚙️ | Test operation | Indicates that Test Operation mode is active. |
| ♨️ | Defrost/Hot start | Indicates that the defrost/hot start mode is active. |
| ? | Self-cleaning filter operation | Indicates that self-cleaning filter operation is active. |
| ?️ | 24-hour ventilation | Indicates that 24-hour ventilation is set. * May not be displayed even if connected to a unit with this function. |
| ? | Night purge | Indicates that night purge is set. |
| ⏸️ | Ventilating standby | Indicates that ventilating operation has been stopped temporarily. (In order to reduce energy loss, ventilating operation is stopped immediately after cooling or heating operation starts). |
| ? | Ventilating operation | Indicates that ventilating operation is being carried out even when operation is stopped, if 24-hour ventilation and night purge are set. |
| ? | Pre Vent (Fresh-up) | Indicates that ventilating is being carried out powerfully due to a large difference in the incoming airflow rate and exhaust airflow rate. |
| ⚠️ | Warning | Indicates that an error occurred, or that an indoor unit component needs to be maintained. |
Read this Manual Before Using the Product
This manual describes the basic operation of the indoor unit which uses the BRC1H62W/BRC1H62K remote controller. Keep this manual where it is readily accessible, and refer to it when necessary.
For detailed contents, refer to the BRC1H62W/BRC1H62K operation manual on the Daikin website. Also, for explanation about things other than remote controller operation, refer to the operation manual attached to the indoor unit.
Daikin Industries, Ltd.
Head office: Umeda Center Bldg., 2-4-12, Nakazaki-Nishi, Kita-ku, Osaka, 530-8323 Japan
Tokyo office: JR Shinagawa East Bldg., 2-18-1, Konan, Minato-ku, Tokyo, 108-0075 Japan
Access web manuals in other languages, such as Portuguese support, via a QR code link.
Safety Precautions
About Warnings and Cautions
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
General Precautions
After completing installation, conduct a test operation to check for faults and explain to the customer how to operate the remote controller and clean it with the aid of the operation manual. Ask the customer to store the installation manual along with the operation manual for future reference.
WARNING
- Ask your dealer or qualified personnel to carry out installation work. Do not attempt to install the remote controller yourself. Improper installation may result in electric shocks or a fire.
- Consult your local dealer regarding relocation and reinstallation of the remote controller. Improper installation may result in electric shocks or a fire.
- Install the remote controller in accordance with the instructions in this installation manual. Improper installation may result in electric shocks or a fire.
- Be sure to use only the specified accessories and parts for installation work. Failure to use the specified parts may result in the remote controller falling down, electric shocks or a fire.
- Install the remote controller on a foundation that can withstand its mass. Insufficient strength may result in the remote controller falling down and causing injury.
- Make certain that all electrical work is carried out by qualified personnel according to the applicable legislation (note 1) and this installation manual, using a separate circuit. In addition, even if the wiring is short, make sure to use a wiring that has sufficient length and never connect additional wiring to make the length sufficient. Insufficient capacity of the power supply circuit or improper electrical construction may lead to electric shocks or a fire. (note 1) applicable legislation means "All international, national and local directives, laws, regulations and/or codes which are relevant and applicable for a certain product or domain".
- Turn off the power before performing installation work. Touching live parts may cause electric shocks.
- Do not disassembly, reconstruct or repair. Failure to do so many cause electric shock or a fire.
- Make sure that all wiring is secured, using the specified wirings and ensuring that external forces do not act on the terminal connections or wirings. Improper connections or fixing may cause an overheat or a fire.
- The choice of materials and installations must comply with the applicable national and international standards.
CAUTION
- To avoid electric shocks due to entry of water or insects, fill the wiring through hole with putty.
- Do not operate with wet hands to avoid electric shocks.
- Do not wash the remote controller with water. Failure to do so many cause electric shock or a fire.
- Install the air conditioner, power supply wiring, remote controller wiring and transmission wiring at least 1 meter away from televisions or radios to prevent image interference or noise. (Depending on the radio waves, a distance of 1 meter may not be sufficient to eliminate the noise.)
- Do not install the remote controller in the following locations:
- 1. Where there is oil mist, oil spray or vapour for example a kitchen. Resin parts may deteriorate and fall off.
- 2. Where corrosive gas, such as sulphurous acid gas, is produced.
- 3. Where there is machinery which emits electromagnetic waves. Electromagnetic waves may disturb the control system, and cause a malfunction of the equipment.
- 4. Where flammable gas may leak, where there is carbon fibre or ignitable dust suspensions in the air, or where volatile flammables such as thinner or gasoline are handled. Operating the unit in such conditions may result in a fire.
- 5. High temperature area or near a heat source. It may cause an overheat or a fire.
- 6. Moist area, or place where may be exposed to water. If water enters inside of the remote controller, electrical components may fail. It may result in electric shocks or a fire.
- When remote controller's thermostat sensor is used, select the installation location by considering the followings.
- A place where average temperature in the room can be detected.
- A place where is not exposed to direct sunlight.
- A place where is far apart from heat source.
- A place where is not affected by outdoor air due to door opening/closing or the like.
Maintenance
Maintaining the Unit and LCD Display
- Wipe the LCD and surface of the remote controller with a dry cloth when they become dirty.
- If the dirt on the surface cannot be removed, soak the cloth in neutral detergent diluted with water, squeeze the cloth tightly, and clean the surface. Wipe the surface with a dry cloth.
- Do not use non-neutral detergents or organic solvents (alcohol disinfectant, benzene, paint thinner, etc.). May cause cracking, electric shocks or fire.
NOTICE
Do not use any paint thinner, organic solvent, or strong acid.
Overview of Screens
The descriptions in this section are just examples. The items available for setting vary depending on the indoor unit you are using. If there is no button operation for about 10 seconds, the screen returns to the home screen.
Home screen
Displays current temperature (e.g., 30°C) and set temperature (e.g., 28°C). Navigation buttons allow selection and confirmation.
Information screen
Displays current time (e.g., 12:34) and various icons indicating system status. Refer to the "About Icons" section for details. Navigation buttons allow selection of icons.
User menu
Allows changing fundamental functions such as operation mode, fan speed, airflow, brightness of Status indicator (LED), and Fahrenheit/Celsius display. Use navigation buttons to select and the set button to confirm.
Changing the operation mode
Use navigation buttons to select the desired operation mode (e.g., Auto, Heat, Cool, Fan, Dry) and press the select button.
Changing the fan speed
Use navigation buttons to select the desired fan level (e.g., Lv1 to Lv5, Auto) and press the select button.
Changing the airflow direction
Use navigation buttons to select the desired airflow direction (e.g., Auto, Swing, Positions 0-4) and press the select button.
Names and Functions
Screen display explanation
- a OFF: Displayed when operation is stopped.
- b Error/Filter/Test/Streamer icon: Error, filter, test and streamer icons are displayed. The streamer icon is displayed when Mold Proof operation is active.
- c Centralized Control: Displayed when under centralized management.
- d Operation mode: Displays the current operation mode.
- e Ventilation mode: (Category for ventilation settings)
- f Room temperature: Displays the current room temperature.
- g Setback: Blinks during setback operation. Displayed during setback setting.
- h Bluetooth: Indicates that the controller is communicating with a mobile device, for use with the app.
- i Changeover Under Control: Displayed when controller is unauthorized to select heating/cooling operation.
- j Fahrenheit/Celsius: Depending on the setting, Fahrenheit/Celsius display can be selected.
- k Air Purifying: (Category for air purification function)
- l Set temperature: Displays setpoint temperature.
- m Clock (24 hours time display): Displays the current time.
- n MAIN/SUB remote controller sign: Indicates whether the controller is the main or sub unit.
- o Status: Notifies the status.
- p Error display: If an error occurs, the icon, an error code and unit number are displayed.
- q Information icon: (General icon indicating information is available)
- r Displays the sensor values: Displays sensor readings. If there are no sensors, a horizontal bar ("-") is displayed.
- s Settings menu icon: Accesses the settings menu.
