TECLAST tPad (Android) User Manual

Android User Manual Setup Guide

This setup guide will help you get started, select system language, time zone, connect to Wi-Fi, set up your username, and device name.

Button Functions

• Power button:
• When the device is off, long press power button for 3 secs to turn on the device.
• When the device is on, short press power button to turn on/off screen.
• When the device is on, long press power button for 3 secs to access the shutdown interface, long press for 10 secs to force shut down the device.
• Volume+ button: Press to increase the volume.
• Volume- button: Press to decrease the volume.

Virtual Button Bar

• HOME button: click to return to home screen
• Back button: click to return to the previous screen
• Background button: click to view, switch and close background apps
• Menu button: click to open menu
• Screenshot button: click to screenshot the current screen
• Volume +: increase volume
• Volume -: decrease volume

Control Center

• User: click to switch local user accounts
• Settings: click to access to system settings
• Battery: click to access battery settings
• Wi-Fi: click to turn on/off Wi-Fi
• Bluetooth: click to turn on/off Bluetooth
• Volume: click to quickly adjust volume
• Flight mode: click to turn on/off airplane mode
• Auto-rotation: click to turn on/off auto-rotation
• GPS: click to turn on/off GPS
• Miracast: click to turn on/off Miracast

Wi-Fi Connection

1. Open Settings and go to Network & Internet setting.
2. Turn on Wi-Fi, choose a wireless network, and enter the network password to connect.

Cellular Connection

1. Insert SIM card and power on the system.
2. Open Settings and go to Network & Internet setting.
3. Turn on cellular data toggle.

*Applicable to supported devices only.

Bluetooth Connection

1. Open Settings and go to Connected Device setting.
2. Turn on Bluetooth and system will automatically search for Bluetooth devices nearby.
3. Click on the connectable Bluetooth device then select Pair in the pop-up menu.
4. Wait for the Bluetooth device to confirm pairing.

*Applicable to supported devices only.

Display

Open Settings and go to Display setting.

1. Brightness: Slide the bar to adjust screen brightness.
2. Wallpaper: Set the wallpaper.
3. Sleep: Set screen time-out.
4. Font size: Set the size of system fonts.
5. Auto-rotation: Lock current screen orientation or automatically rotate the screen based on device orientation.

Sound

Open Settings and go to the Sound setting.

1. Volume: Slide the bar to adjust the volume of media, alarm, and ringtone.
2. Notification: Set notification sound.
3. Ringtone: Set incoming call ringtone.
4. Other Sounds: Set lock screen and touch sound effects

Battery Status

Open Settings and go to Battery setting to view battery usage. Battery Indicator: Toggle the switch to display battery percentage.

Connect to PC

Device can be connected to a PC using a USB cable to copy or delete data on the device.

1. Operating systems including Windows 7 and above will automatically install MTP drivers when the device is connected to a PC.
2. For Windows XP, Windows Media Player 11 must be installed before the device can be connected.

Language and Input

Open Settings and go to Language and Input setting.

1. Language: select system language.
2. Input: select the default system input method and its respective settings

Date and Time

Open Settings and go to Date and Time setting.

1. Automatic date & time: turn on to automatically sync to local time when connected to the internet. You can manually adjust the date and time by turning off this function.
2. Automatic time zone: turn on to automatically sync to local time zone when connected to the internet. You can manually adjust the time zone by turning off this function.
3. 24-hour format: choose between AM/PM and 24-hour display formats.

Factory Reset

1. Open Settings and go to System Setting, Advanced, Reset Options to perform a factory reset.
2. Factory reset will erase all personal data, please backup your data before resetting.

Charger Specifications

Charger specs should match the input voltage/current shown on the back of the product.

Please only use chargers that meets the above specification.

Please do a full recharge every 3 months if the product is going to stay unused for an extended period.

For first use after storage, the product may require a 30 minute charging session before charging status is indicated.

Table of hazardous substances contained in the product.

The sheet is made according to SJ/T 11364.

O: Means the content of this hazardous substances is under the limitation of GB/T 26572.

X: Means the content of this hazardous substances is over the limitation of GB/T 26572.

This series of products implement the national standard: GB 28380-2012 (Microcomputer Energy Efficiency Limit and Energy Efficiency Grade)

Guangzhou Shangke Information Technology Limited

Made In China

FCC Caution.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:

This device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Tablet PC (FCC ID: WF5-ST11) has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories maintain a 0mm separation distance between the user's body and the back of the Tablet PC. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.