Parts Diagram Overview
The provided document includes an exploded view diagram illustrating the assembly of the MTD WDHK 22-inch high-wheel side discharge mower. This diagram visually represents how various components fit together, with numerical callouts corresponding to the detailed parts list. It aids in understanding the mower's construction and the placement of each part for assembly, maintenance, or repair.
Parts List
| Index Part No. | Description | Index Part No. | Description |
|---|---|---|---|
| 1 | Deck 22" | 26 | Bracket-LH Handle |
| 2 | Bracket-Wheel | 27 | Washer-3/8 SAE Flat |
| 3 | Washer-Spring | 28 | Washer-3/8 Belleville |
| 4 | Shield-Plastic Trailing | 29 | Adapter-Blade |
| 5 | Blade-22" Flat | 30 | Clip-Trailing Shield |
| 6 | Wheel Assemblies | 31 | Decal-C.P.S.C. Danger |
| 7" Plastic-White-Diamond-Nylon Bearing | 32 | Decal-Blade Warning | |
| 7" Steel-White-Rib-Flange Bearing | 33 | Decal-Starting Instructions | |
| 8" Plastic-White-Diamond-Nylon Bearing (3-Spoke) | 34 | Back Plate Height Adjuster | |
| 8" Plastic-White-Diamond-Nylon Bearing (4-Spoke) | 35 | Bolt-3/8-16 x 7/8 Hx Hd Thd Forming | |
| 8" Steel-White-Rib-Flange Bearing | 36 | Bolt-Front Wheel | |
| 8" Plastic-White-Rib | 37 | Washer, Flat-Height Adjuster | |
| 7 | Wheel-16 x 1.75-White-Plastic | 38 | Washer-5/16 Curved |
| 8 | Cable-Engine/Blade Control | 39 | Wingnut-5/16-18 |
| 9 | Control-Throttle w/Cable | 40 | Key #6 Woodruff |
| 10 | Handle-Lower | 41 | Bolt-1/4-20 x 1/2 Hx Hd Thd Forming |
| 11 | Handle-Upper | 42 | Clamp-Cable |
| Handle-Upper with Cushion Grip* | 43 | Screw-#10 x 5/8 Self-Tap | |
| 12 | Bolt-1/4-20 x 2-1/4 Hx Hd | 44 | Bolt-Blade |
| 13 | Bolt-3/8-16 x 3/4 Carriage | 45 | Wheel Arm Assembly |
| 14 | Locknut 3/8-16 Jam | 46 | Bolt-#10-24 x 1/2 Hx Hd |
| 15 | Plastic Tip-Height Adjuster | 47 | Pin-#3 Hitch |
| 16 | Washer-Blade | 48 | Washer-3/8 Hardened |
| 17 | Bar-Stabilizer | 49 | Nut-1/4-20 Keps |
| 18 | Baffle-Deck | 50 | Bolt-5/16-18 x 1-3/4 Curved Hd |
| 19 | Wheelbolt - Rear | 51 | Stop-Rope |
| 20 | Bail-Engine/Blade Control | 52 | Nut-3/8-16 Flange Lock |
| 21 | Chute Deflector Assembly | 53 | Nut-#10-24 Nylon Insert |
| 22 | Tie-Cable | 54 | Washer, Plastic-Height Adjuster |
| 23 | Bolt-3/8-16 x 1 Hx Hd | 55 | Guide-Rope |
| 24 | Bolt, Shoulder Height Adjuster | ||
| 25 | Bracket-RH Handle |
Notes
- * Indicates Optional Equipment
- Contact engine manufacturer's authorized service dealer for parts and warranty.
- When servicing use only Genuine Factory Replacement Parts (OEM) that are specifically designed for the particular model that you are working with.
- Parts are right or left hand as viewed from the operator's position.
- Model specifications are subject to change without prior notice.
- Do not operate the mower unless all parts are attached and in good working order.
- Lawn mower deck and/or other painted parts differing in color may be substituted without notice.
