ED-HMI3020-101C 10.1-inch Industrial Tablet PC
by EDA Technology Co., Ltd | Built: 2025-08-19
Powered by Raspberry Pi
A 10.1-inch tablet computer with a scenic image displayed on its screen, showing a person in a boat with lanterns.
Product Overview
The ED-HMI3020-101C is a 10.1-inch industrial tablet PC based on the Raspberry Pi 5 platform. It features a 10.1" TFT capacitive touchscreen with a resolution of 1280x800 pixels. The device is powered by a Broadcom BCM2712 quad-core Arm Cortex-A76 64-bit 2.4GHz CPU and supports up to 16GB of LPDDR4X RAM. It offers extensive connectivity options including USB 3.0 and 2.0 ports, RS232, RS485, Gigabit Ethernet with optional PoE, and dual HDMI outputs capable of 4Kp60 video. The tablet is housed in a CNC-machined aluminum alloy frame with a fanless design for reliable operation in industrial environments.
Specifications
Core Specifications
| Parameter | Value |
|---|
| CPU | Broadcom BCM2712, Quad-core Cortex-A76, 64-bit, 2.4GHz |
| VPU | H.265 (HEVC), up to 4Kp60 decoding |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| Memory | 4GB/8GB/16GB LPDDR4X-4267 SDRAM (Optional) |
| Storage | Micro SD card slot (supports 32GB/64GB SD cards); M.2 NVMe SSD slot (supports 128GB/256GB SSD) |
Operating System
- Raspberry Pi OS (Desktop) 32-bit
- Raspberry Pi OS (Lite) 32-bit
- Raspberry Pi OS (Desktop) 64-bit
- Raspberry Pi OS (Lite) 64-bit
Front Panel I/O
- Camera: Optional 8MP front camera support
Side Panel I/O
| Interface | Description |
|---|
| Audio Input | 1x Audio Input (LINE IN), 3.5mm stereo audio jack (Red) |
| Speaker | 1x Amplifier output, built-in 1x 4Ω3W speaker |
| RS485 Interface | 3-Pin 3.5mm pitch terminal block, with 120Ω termination resistor, signal definition: GND/A/B |
| RS232 Interface | 3-Pin 3.5mm pitch terminal block, signal definition: GND/TX/RX |
| USB 2.0 Interface | 2x USB 2.0 Type-A ports, each up to 480Mbps transfer speed |
| USB 3.0 Interface | 2x USB 3.0 Type-A ports, each up to 5Gbps transfer speed |
| 1000M Ethernet Interface | 1x Gigabit Ethernet port (10/100/1000M adaptive), RJ45 terminal, supports PoE power supply via expansion module |
| SD Card Slot | 1x Micro SD card slot, supports system boot from SD card |
| HDMI Interface | 2x HDMI, Micro HDMI ports, supports 4K 60Hz resolution |
| Power Interface | 1x USB Type-C port, supports 5V 5A power input |
Buttons and Indicators
- ON/OFF Button: 1x Power ON/OFF button for device startup and shutdown.
- PWR Indicator: 1x Red LED for power status indication.
- ACT Indicator: 1x Green LED for system activity status.
- COM1-COM2 Indicators: 2x Green LEDs for serial port communication status.
Internal I/O
| Interface | Description |
|---|
| M.2 M Key | 1x M.2 M Key connector for external SSD and other high-speed devices. Compatible with M.2 2230, M.2 2242, and M.2 2260, supports system boot from SSD. |
LCD Screen
| Parameter | Value |
|---|
| Screen Type | 10.1" TFT |
| Resolution | 1280 x 800 |
| Max Colors | 16.7 Million (24-bit) |
| Display Area | 216.576mm (H) x 135.36mm (V) |
| Backlight | LED |
| Backlight MTBF | >30,000 hours |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 30ms |
| Viewing Angle (CR≥10) | 80°(L)/80°(R)/80°(U)/80°(D) |
Touchscreen
| Parameter | Value |
|---|
| Type | Multi-point capacitive touchscreen |
| Transmittance | ≥85% |
| Connection | COF |
| Interface | I2C |
| Driver Support | Linux |
| Multi-touch Points | Up to 10 points |
| Surface Hardness | 6H |
Expansion Features
- RTC: Integrated supercapacitor for RTC backup power, ensuring system clock accuracy even during power loss. Supports CR1220 battery for backup.
- Buzzer: Configurable for alerts or exceptions to provide audible notifications.
Electrical Parameters
| Parameter | Value |
|---|
| Input Voltage | 5V DC |
| Max Power Consumption | 25W |
Mechanical Parameters
| Parameter | Value |
|---|
| Dimensions | 258mm x 172mm x 39.6mm (L x W x H) |
| Weight | Approx. 1Kg |
| Mounting | Embedded front mounting |
Wireless
| Parameter | Value |
|---|
| Wi-Fi | Dual-band 802.11ac Wi-Fi |
| Bluetooth | Bluetooth 5.0 / BLE |
Environmental Parameters & Regulations
| Parameter | Value |
|---|
| Operating Temperature | -20°C to 60°C |
| Storage Temperature | -25°C to 60°C |
| Operating Humidity | 5% to 95% (non-condensing) |
Certifications
- FCC: FCC 47 CFR Part 15 Subpart B
- CE: EN IEC 62368-1, EN IEC 62311, EN IEC 61000-3-2, EN IEC 61000-3-3, EN 55032, EN 55035
- RF Certifications: EN 301 489-1, EN 301 489-3, EN 301 489-17, EN 301 489-52, EN 301 328, EN 301 440, EN 301 511, EN 301 908-1, EN 301 908-2
System Block Diagram
The diagram illustrates the central Raspberry Pi 5 unit. Connected to the Raspberry Pi 5 are: Memory (4GB/8GB RAM), Storage (Micro SD Card Slot, M.2 M Key for SSD), and various I/O interfaces. I/O interfaces include: USB Type-C for 5V 5A power input, 2x USB 3.0 Type-A ports, 2x USB 2.0 Type-A ports, 1x Gigabit Ethernet port (RJ45), 2x Micro HDMI ports. Serial communication is handled by RS232 and RS485 transceivers, connected via 3-pin terminal blocks. Audio capabilities include a 3.5mm stereo audio input (LINE IN) and a 3.5mm stereo audio output (HPO) connected to an Audio PA and speaker. Camera and Display interfaces (DSI) are also shown, with an optional camera module. Expansion features like RTC (with SuperCAP/CR1220 battery) and Buzzer are integrated. A PoE module (12V) is shown as an optional power input. Indicators (PWR/ACT) and a Power Button (ON/OFF) are also part of the system. The diagram emphasizes the modularity and connectivity options of the Raspberry Pi 5 based HMI.
Product Dimensions
The diagram shows the physical dimensions of the ED-HMI3020-101C. Front View: Shows the 10.1-inch LCD screen, bezel, and mounting points. Key dimensions indicated are approximately 172mm width and 258mm height. Side View: Shows the thickness of the unit, approximately 39.6mm. Mounting brackets or screw holes might be indicated. Back View: Shows the rear panel with various I/O ports, ventilation (though it's fanless), and mounting provisions. Overall dimensions are approximately 258mm (Length) x 172mm (Width) x 39.6mm (Height).
Ordering Information
Ordering Code Structure
The ordering code for the ED-HMI3020-101C is structured to specify various configurations. A typical example is ED-HMI3020-101CC-04321-P, which indicates:
- ED-HMI3020-101C: Base model
- C: With Camera
- 04: 4GB DDR RAM
- 32: 32GB SD Card
- 1: With 128GB SSD
- P: With PoE Module
Note: As the Raspberry Pi 5 does not have eMMC storage, customers must select at least one option for SD card or SSD.
Optional Accessories: Raspberry Pi Power Adapters
| Order Code | Description | Image Description |
|---|
| SC1149 | Raspberry Pi 27W USB-C Power Supply White UK | Image shows a white Raspberry Pi 27W USB-C power adapter with a UK plug. |
| SC1150 | Raspberry Pi 27W USB-C Power Supply White AU | Image shows a white Raspberry Pi 27W USB-C power adapter with an AU plug. |
| SC1151 | Raspberry Pi 27W USB-C Power Supply White IN | Image shows a white Raspberry Pi 27W USB-C power adapter with an IN plug. |
| SC1152 | Raspberry Pi 27W USB-C Power Supply White EU | Image shows a white Raspberry Pi 27W USB-C power adapter with an EU plug. |
| SC1153 | Raspberry Pi 27W USB-C Power Supply White US | Image shows a white Raspberry Pi 27W USB-C power adapter with a US plug. |
| SC1154 | Raspberry Pi 27W USB-C Power Supply Black UK | Image shows a black Raspberry Pi 27W USB-C power adapter with a UK plug. |
| SC1155 | Raspberry Pi 27W USB-C Power Supply Black AU | Image shows a black Raspberry Pi 27W USB-C power adapter with an AU plug. |
| SC1156 | Raspberry Pi 27W USB-C Power Supply Black IN | Image shows a black Raspberry Pi 27W USB-C power adapter with an IN plug. |
| SC1157 | Raspberry Pi 27W USB-C Power Supply Black EU | Image shows a black Raspberry Pi 27W USB-C power adapter with an EU plug. |
| SC1158 | Raspberry Pi 27W USB-C Power Supply Black US | Image shows a black Raspberry Pi 27W USB-C power adapter with a US plug. |
Packing List
- 1 x ED-HMI3020-101C Main Unit
- 1 x Accessory Kit (includes 4x clips, 4x M4*10 screws, and 4x M4*16 screws)
