USER QUICK GUIDE
BSC100S BIKE SMART COMPUTER
Visit: www.igpsport.com
Product Overview
The iGPSPORT BSC100S is a compact and advanced bike smart computer designed for cyclists. The device features a clear 2.6-inch LCD display showing key riding metrics. The screen typically displays:
- LAP: 08
- Time: 20:06
- Satellite Signal Status
- Bluetooth Connectivity Status
- Power (PWR): Average 226 Watts (W)
- Speed (SPD): Average 32.9 km/h
- Cadence (CAD): Average 86 revolutions per minute (rpm)
- Heart Rate (HRM): Maximum 172 beats per minute (bpm)
- Altitude (ALT): Average 46 meters (m)
Physical buttons are located at the bottom of the device for navigation and control.
Manufactured by: WUHAN QIWU TECHNOLOGY CO., LTD.
1. BUTTONS
| Button | Function |
|---|---|
| Left Button | Short press to power on/long press to power off. Short press to start/pause ride recording. |
| Right Button | Short press to switch data page. Long press to save the ride record when riding recording. Long press to enter the GPS bike computer setting mode when not riding recording. |
2. ICONS
| Icon | Description |
|---|---|
| ? [Satellite Signal] | Satellite signal |
| ? [Bluetooth] | Bluetooth |
| ⏸️ [Pause] | Pause |
| ? [Recording] | Recording |
| ? [Incoming Call] | Incoming call alert |
| ? [Battery] | Battery |
| ? [Speedometer] | Speedometer (displayed when sensor is connected) |
3. GPS BIKE COMPUTER SETTING MODE
- Long press the right button to enter the setting mode (E1~E5), and short press the right button in the setting mode to switch between E1 and E5.
- When the E1~E5 icons are flashing, short press the left button to enter the corresponding setting state.
- Press and hold the right button for 2 seconds to save and exit the setting mode.
- The settings are automatically saved after 10 seconds of no button operation in the setting mode.
| Setting | Function | Operation Method | Notice |
|---|---|---|---|
| E1 | Unpair phone | 1) When E1 is flashing, short press the left button to unpair the phone, and the device will restart automatically. | |
| E2 | Set time zone | 1) Enter E2, short press the left button to select the time zone, short press the right button to set the number. | 1) Default time zone: UTC/GMT+00:00 (please set the local time zone). |
| E3 | Connect the sensor | 1) Enter E3, the device automatically searches for sensors, and the sensor symbol keeps flashing. 2) After the sensor is connected, the corresponding value will be displayed. 3) After entering the sensor search state for 30s, it will automatically exit the setting mode. |
1) The sensor needs to be searched and connected again after replacing the battery. |
| E4 | Set wheel diameter | 1) Enter E4, short press the left button to switch the number of digits, short press the right button to set the value. | 1) Use the speed sensor to set the wheel diameter. 2) Default wheel diameter: 2096mm. |
| E5 | Set metric and imperial units | 1) Enter E5, short press the right button to switch between metric (kilometers) and imperial (miles) units. | 1) Default unit: Metric (km). |
4. PAIRED PHONE
Pairing the phone for the first time:
- Download the iGPSPORT APP.
- Turn on the Bluetooth of the mobile phone, and use the iGPSPORT APP to pair the device.
- The BSC100S Bluetooth icon ? shows that it has been paired and connected.
- After the GPS bike computer is connected to the iGPSPORT APP, more functions can be used, including:
- Data Management: Synchronize cycling activities to the cloud.
- Smart Notifications: Incoming call alerts.
- Sensor Settings: For more convenient sensor connection.
- Page Configuration: Customize configuration page data with recommended schemes.
- Alert Settings: Set alert reminders for multiple data points.
- Automatic Function: Enables automatic start, automatic pause, automatic lap counting, automatic page turning, and other auxiliary functions for convenient riding.
5. PACKING LIST
- BSC100S x1
- User manual x1
- Standard base x1
6. CONTACT US
Website: www.igpsport.com
Company: Wuhan Qiwu Technology Co., Ltd.
Address: 3/F Creative Workshop, No.04 District D Creative World, No.16 West Yezhihu Road, Hongshan District, Wuhan, Hubei, China.
Phone: (86)027-87835568
Email: service@igpsport.com
Disclaimer: This user manual is for reference only. If content or steps differ from the device's functions, the device prevails. Wuhan Qiwu Technology Co., Ltd. will not provide further notice. Copyright belongs to Wuhan Qiwu Technology Co., Ltd.
USER MANUAL: Please log in to the official website to view the details of the manual.
Website and QR code: https://www.igpsport.com/user-manual [Link to user manual]
7. INSTALL THE BASE FOR YOU BSC100S
Secure the computer base to the handlebar using the included rubber ring.
- Install the rubber pad on the back of the computer base.
- Choose a suitable location on the handlebar to place the rubber pads and computer base.
- Choose a suitable location on the handlebar to place the rubber pads and computer base.
- Align the tab protrusions on the back of the computer with the slots on the base of the computer.
- Place the computer on the base and rotate it 90 degrees to lock it in place.
Installation Visual Guide:
- Image 1: Shows the computer base, rubber ring, and rubber pad.
- Image 2: Depicts the computer base secured to a handlebar using the rubber ring.
- Image 3: Illustrates the computer being attached and locked onto the base mounted on the handlebar.
- Image 4: Shows the fully mounted computer on the handlebar, displaying riding data.
Notes:
- You can also use iGPSPORT M80/S80 and other compatible computer extension brackets to mount the computer.
- It is recommended to use the official iGPSPORT computer base or extension bracket to prevent damage to the computer's mounting buckle.
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.
FCC ID: 2AU4M-BSC100
SPECIFICATIONS:
Operating Temperature: -10°C ~ 50°C
