1. PRODUCT INTRODUCTION

1.1 INITIAL SETUPS

Hold and press [power button] for 4 seconds to open the device.

After the first boot, press [up button] to select the options, and then press [confirm button] to confirm. Use [up/down buttons] to change the value and press [confirm button] to confirm. If you want to return and change your setting, please press [back button] to go back to the page you need to change.

Step 1: Select a language: press [up/down buttons] to select your language; press [confirm button] to save and view the next setting.

Step 2: Smartphone pairing notification: use your smartphone to download the iGPSPORT APP and pair your smartphone with the device in this APP. Press [up button] to view the next setting, [back button] to the previous.

Step 3: Select metric/imperial: press [up/down buttons] to select units for speed/distance, elevation or temperature. Press [confirm button] to save and view the next setting; press [back button] to view the previous.

Step 4: Select time format (12-Hour or 24-Hour). Press [up/down buttons] to select the time format. Press [confirm button] to save and view the next setting; press [back button] to view the previous.

Note: The device only sets the time zone; the time and date will be automatically calibrated after the GPS is ready. You can enter the home page to use the device upon finishing the setups. Firmware can be updated only through the iGPSPORT APP. To ensure the best performance and newest functions, pair your smartphone with the device later and refer to 'Pairing Your Smartphone' for details.

1.2 CHARGING

The device has a rechargeable Li-ion battery. You can use a DC power adapter or the computer USB port to charge it (ensure the original charging cable is used).

1. Unplug the USB waterproof plug from the back.
2. Plug the USB cable.
3. Wait for the charging completed.

After charging, unplug the USB cable and plug the USB waterproof plug.

Note:

• Please use a DC 5V standard power adapter. Fast charge adapters are not recommended as they may damage the battery.
• A battery icon will display on the upper right corner when the battery is low, suggesting charging for the device.
• Do not overstretch the USB waterproof plug to maintain its waterproof and dustproof performance.

1.3 BUTTON FEATURES

The iGS630 cycling computer has 6 buttons with different functions on different pages. Refer to the table below for specific button functions.

Icon Descriptions

1.4 PAIRING YOUR SMARTPHONE

Pairing your smartphone enhances the use of your cycling computer, providing richer experiences through the iGPSPORT APP, including Activity Auto Sync, Cycling Computer Configuration, Alerts, Sensors Management, Tracking, and Firmware Update.

Important: Pair your smartphone within the iGPSPORT APP, not in your phone's Bluetooth settings. Ensure your smartphone is connected to the network and Bluetooth is enabled.

Download the iGPSPORT APP from the App Store or Google Play.

Android Users: Ensure the iGPSPORT APP has permission to access location services.

First Pairing:

1. Open the iGPSPORT APP on your smartphone and log in with your iGPSPORT account.
2. Place the cycling computer near your smartphone. Navigate to "My Status" on the APP's home page or "Device Management" on the device. Click "Add Device", select "Cycling Computers", and your smartphone will automatically search for "iGS630". Select it and click "Connect" to start pairing.
3. When prompted with "Bluetooth pairing Request", click "Pair" to accept.
4. After successful pairing, the cycling computer will appear in the device list.
5. A device setting prompt will appear in the iGPSPORT APP. Complete your settings and click "Save and Sync" to sync settings to the device.

If pairing is successful, the device and smartphone will connect automatically via Bluetooth. If it fails, try restarting your smartphone's Bluetooth, the iGPSPORT APP, or the cycling computer.

Remove Pairing:

To pair your cycling computer with a different smartphone, remove the current pairing first:

1. Go to Setting > Pair Phone to view the paired device list.
2. Select the device to delete, click "Unpair", and press [confirm button] to confirm.
3. Upon deletion completion, the "Bluetooth Disconnected" icon will appear on the device.

Note: Do not pair and unpair frequently.

1.5 FIRMWARE UPDATE

To maintain optimal device performance, update the firmware timely when a new version is available. Firmware updates can improve user experience, introduce new functions, enhance existing features, or fix errors. No data will be lost during a firmware update.

Note:

• Before updating, ensure your activity data has been synced to your iGPSPORT account to prevent data loss. Also, confirm the computer is fully charged and Bluetooth and data networks are stable.
• Navigate to the iGPSPORT APP > Device > Firmware Update to check for new versions and follow the update guidance.
• The update time depends on the Bluetooth signal strength, taking up to 20 minutes. Please wait patiently.

1.6 INSTALLATION OF STANDARD BIKE MOUNT

Use the included rubber bands to attach the standard bike mount to the bike stem.

1. Place the rubber disk on the back of the standard bike mount.
2. Select a suitable position on the bike stem to place the rubber disk and the standard bike mount.
3. Use two rubber bands to bypass the bike stem respectively, hook the buckle of the bike mount, and fix it on the bike stem.
4. Align the tabs on the back of the device with the standard bike mount notches.
5. Place the cycling computer on the base and rotate it 90 degrees.

Note:

• You can also use the out-front bike mount (iGPSPORT M80) to install the cycling computer.
• It is recommended to use the official iGPSPORT standard bike mount or out-front bike mount to avoid damaging the cycling computer's buckle.

2. GOING FOR A RIDE

2.1 PRE-RIDING

To ensure accurate riding data, wait for the device to detect the GPS signal before riding.

If GPS signal is needed, go outside and stay away from tall buildings and trees. Keep the device still with the screen facing up, and avoid touching it while searching for GPS signal.

If a sensor was previously connected, it will automatically connect to the device upon wake-up, and the device will also automatically search for the sensor. During your ride, the device will automatically measure your heart rate, cadence, power, and other data using your sensors.

When there are at least four satellites for locating, the GPS icon will show [GPS icon], and you can start riding. For more accurate data, wait until [GPS icon with more bars] or [GPS icon with full bars] is displayed. The GPS icon becomes [GPS icon with full bars] when enough satellites are found for good GPS accuracy.

After all signals are detected, press [Play/Pause button] to enter the cycling data page.

Press [Play/Pause button] to view the riding data page.

Press [Play/Pause button] to start recording an activity on the riding data page.

Press [Lap button] to start a new lap record; the lap data will display for 10 seconds.

Press [Back button] or [Play/Pause button] to exit the lap data popup.

During riding data timing, press [Play/Pause button] to stop the timer.

Press [Menu button] to view the menu, select "Save", and press [Confirm button] again to save the recording. After successful saving, the Riding Data Summary will display.

Press [Up/Down buttons] to select and view the riding data summary.

Press [Back button] or [Play/Pause button] to close the lap data popup.

2.2 WHILE-RIDING

Scan Data View

During training, use [Up/Down buttons] to switch riding views. The displayable riding data and information depend on the selected cycling mode and your customizations.

You can set up specific pages for different cycling modes on the device and in the iGPSPORT APP. Create custom data fields for each activity mode and select the data you want to see during your ride. For more information, see the "Activity Content in Cycling Mode" section.

Status Page View

During your ride, press [Menu button] to view the Status page. This page displays information including sensors, weather, and smart notifications.

Shortcut Menu

During your ride, press [Confirm button] to open the menu and access functions like page templates, data fields, and elevation calibration.

• Data Field Setting: Jump to template and field selection for the current page. See "Cycling Mode > Page Setting" for details.
• Cycling Mode Settings: Jump to the current cycling mode page for quick setup. See "Cycling Mode" for details.

About Elevation: The built-in barometer calculates elevation, ascent, and descent by measuring air pressure. Ascent and descent are displayed in meters/feet. In the first few minutes of riding, air pressure is calibrated automatically via GPS. Once riding begins, elevation calibration relies solely on the barometer, though air pressure may not always be accurate. Elevation will be corrected automatically later. After the ride and data sync, corrected data can be viewed in the APP.

For the most accurate elevation reading, it is recommended to manually calibrate elevation using reliable references (e.g., peaks, topographic map) or at sea level. Manual calibration can be done from the elevation view in the climbing or navigation view.

Note: Mud or dirt on the device can cause inaccurate elevation readings. Ensure the device is clean for proper barometer function.

Lap

Pressing [Lap button] allows manual lap recording. The Auto Lap function can be enabled in "Device Setting" of the iGPSPORT APP, configurable by distance, position, or time. For distance-based laps, set the desired distance. For position-based laps, the starting point is the mark point, and a lap is counted upon returning to it. For time-based laps, a lap is counted after the specified time period.

Pause/Stop

1. Press [Play/Pause button] to pause recording.
2. Press [Play/Pause button] again to continue.
3. Press [Menu button] to stop recording. Select "Save" from the popup to stop the activity.

After saving the activity, you can view its details on the device.

2.3 POST-RIDING

Activity Summary

After finishing an activity, you can immediately view its details on the device. More detailed data and analysis are available in the iGPSPORT APP or on the official website. Activity summary information is based on data collected during the activity.

On the home page, press [Up/Down buttons] to select "History" and press [Confirm button] to view the recent activity list and its summary. You can view historical activity summaries saved on the device. Press [Up/Down buttons] to select the desired activity and press [Confirm button] to open its summary.

View Cycling Data in the iGPSPORT APP

If your smartphone is within Bluetooth range when the ride finishes, the device will automatically connect and sync with the iGPSPORT APP (auto-sync must be enabled in the APP). In the APP, you can quickly scan activity details and share them with friends.

Analyze activity records on the iGPSPORT website to learn about your performance, track progress towards monthly training targets, and share personal bests with others. For more details, refer to the iGPSPORT APP.

3. CYCLING MODE

Cycling mode refers to the various cycling ways you can select on the device. There are four default cycling modes, and you can create and set new modes as needed.

You can make specific settings for each cycling mode, such as custom data page templates and selecting the data you want to view (e.g., heart rate only, or speed and distance only) to best meet your training needs.

The device can save up to 8 cycling modes.

Select "Cycling Mode" on the home page, and press [Confirm button] to view its options. Select a mode and press [Confirm button] to view its options.

3.1 ENABLING MODES

Select "Enable" and press [Confirm button] to enable this mode.

3.2 PAGE SETTING

Select "Pages" and press [Confirm button] to enter the page list. There are five system-built-in data pages, maps, altimeters, and some specific pages.

• Select "Enable" and press [Confirm button] to show/hide a page. Press [Back button] to exit.
• Select "Page Field" and press [Confirm button] to view page templates. Press [Up/Down buttons] to switch and get a live preview. Press [Back button] to cancel and exit.
• Switch to the needed page and press [Confirm button] to save and set data fields. Press [Back button] to exit and save the template.
• When setting data fields, press [Up/Down buttons] to select one to modify. Press [Confirm button] to view its details. Press [Up/Down buttons] to select a data field, press [Confirm button] to save, and press [Back button] to exit.
• Reorder: Supports reordering pages in Page Setting. Select "Upward" and press [Confirm button], and the page will move up. Select "Downward" and press [Confirm button], and the page will move down.
• It supports auto return to the home page. Select "Home Page" in the page setting of the selected page, and press [Confirm button] to set it as the home page. When cycling, if auto return is enabled, the device will automatically return to the home page after viewing other pages.

3.3 AUTO FUNCTIONS

Select "Auto Functions" and press [Confirm button] to view its options. Select an auto function and press [Confirm button] to open and set the threshold values. Press [Up/Down buttons] to select the value and press [Confirm button] to save and exit.

3.4 ALERTS SETTING

Select "Alerts" and press [Confirm button] to view its options. Select an alert and press [Confirm button] to view and set the value. Press [Up/Down buttons] to select the value and press [Confirm button] to save and exit.

3.5 DELETE MODES

Select "Delete" and press [Confirm button] to delete it.

3.6 ADD MODES

Select "Add New" and press [Confirm button] to create a new mode. Select an existing mode as a template, customize it, and change the template into a new mode.

4. NAVIGATION

Once the navigation function of iGS630 is enabled, the device will guide you; simply follow the on-screen instructions.

Plan your route in the iGPSPORT APP and send it to the device. GPX format files can be directly imported into the iGPSPORT APP as navigation routes. Press [Up/Down buttons] to select "Navigation" on the home page, and press [Confirm button] to view its options.

4.1 FOLLOWING A COURSE

Courses sent from the iGPSPORT APP can be viewed in navigation routes. Select "Navigation Routes" and press [Confirm button] to view its options. Press [Up/Down buttons] to select a course, press [Confirm button] to view its options, and press [Confirm button] again to start navigation. After selecting a course, the device will display the map page, including the course overview and elevation profiles.

4.2 FOLLOW A SAVED ACTIVITY

Select "Activities" and press [Confirm button] to view its options. Press [Up/Down buttons] to select an activity, and press [Confirm button] to start navigation.

4.3 NAVIGATION OPTIONS

During cycling, you can perform other operations:

• Zoom in or out the map: Press [Up/Down buttons] on the map page to zoom in or out.
• Back to the starting point: Press [Menu button] to view menu options, press [Up/Down buttons] to select "Back to the Starting Point", and press [Confirm button] to navigate along the route back to the starting point. This function is useful for choosing a safe and familiar route back.
• Stop the Route: Select "Stop the Route" and press [Confirm button] to stop navigation.

5. WORKOUTS

Press [Up/Down buttons] to select "Workouts", and press [Confirm button] to view its options. You can create a workout course based on heart rate, power, time, distance, or calories in the iGPSPORT APP or import courses from the Training Peaks APP (requires association with a Training Peaks account) and send these workouts to the device.

5.1 FOLLOWING A WORKOUT COURSE

Download a workout course from the iGPSPORT APP. Press [Up/Down buttons] to select a workout course, press [Confirm button] to view its options, and press [Confirm button] to follow it. After following a workout course, the Workout page will be displayed on the last page of cycling data. Press [Play/Pause button] to start a workout course and the activity timer. Press [Confirm button] on the Workout page to stop the current workout step and proceed to the next. Press [Menu button] to view the menu, select "Stop Workout", and press [Confirm button] to stop it. The workout page will be hidden 3 seconds later. After the activity is saved or discarded, the workout will also stop.

5.2 WARNING

If you are training beyond your set heart rate or power zone, the device will notify you with a warning.

5.3 PAUSE/STOP A WORKOUT COURSE

1. Press [Play/Pause button] to pause your workout course.
2. Press [Play/Pause button] again to continue.
3. Press [Menu button] to view the menu, select "Stop Workout Course", and press [Confirm button] to stop it. The workout page will be hidden 3 seconds later.

After the activity is saved or discarded, the workout will also stop. After saving the workout, you can immediately get the workout summary on the device.

5.4 TRAINER TRAINING

Setting Resistance

Select "Trainer Mode" and press [Confirm button] to view its options. If the smart Trainer is not connected, press [Confirm button] to view sensor options. Wake up the smart Trainer and connect it to the device. Select "Level" and press [Confirm button] to view its options. Press [Confirm button] in the main menu. Press [Play/Pause button] to start or stop the activity timer. Press [Menu button] to view the menu, and select "Save" to save the activity.

Setting Target Power

Select "Target Power" and press [Confirm button] to view the power setting page. Resistance will adjust according to your speed to maintain constant power. Press [Up/Down buttons] to set the target power. Press [Play/Pause button] to start or stop the activity timer. Press [Menu button] to view the menu, and select "Save" to save the activity.

Follow an Activity

Select "Follow an Activity", and press [Confirm button] to view saved activities. Press [Up/Down buttons] to select an activity, and press [Confirm button] to view the riding page. The Trainer will increase or decrease resistance according to the elevation of the course or activity. Press [Play/Pause button] to start or stop the activity timer. Press [Menu button] to view the menu, and select "Save" to save the activity.

6. HISTORY

History stores your saved cycling activities. You can view information such as time, distance, calories, average speed, laps, and sensors. Note: Older history may be overwritten if storage space is insufficient. Press [Up/Down buttons] on the home page to select "History" and press [Confirm button] to view it.

6.1 ALL ACTIVITIES

Go to History > All Activities and press [Confirm button] to view its options. Press [Up/Down buttons] to select an activity. Press [Confirm button] to view its options and press [Confirm button] again to view the details. Press [Confirm button] once more to view laps and charts, or to delete the activity. Press [Back button] to exit.

6.2 HISTORICAL DATA

Go to History > Historical and press [Confirm button] to view the odometer, total time, total ascent, and maximum speed of all activities.

7. STATUS PAGE

Press [Confirm button] to view its options. GPS, battery, and sensor connection status with the smartphone will be displayed on the Status Page.

7.1 SENSORS

Select "Sensors" and press [Confirm button] to view its options. Wake up nearby sensors. Press [Confirm button] to view options for adding sensors; the device will display all searched sensors. Press [Up/Down buttons] to select a sensor and press [Confirm button] to connect and save it.

7.2 WEATHER

On the device, view weather information synced by the iGPSPORT APP. Press [Confirm button] on the Status Page to select "Weather". Press [Confirm button] to view details and update information as prompted. After updating, temperature, chance of rain, wind velocity, and wind direction will be displayed. Press [Back button] to exit the weather details page, and press [Back button] again to exit the Status Page. To enable this function, the iGPSPORT APP must be installed on your smartphone to connect to the device, and location services (iOS) or location setting (Android) must be turned on.

7.3 SMART NOTIFICATIONS

View calls and messages notifications on the device, and configure smart notification options through the iGPSPORT APP. Notifications for calls, messages, and apps received on the device are synchronized in real-time with your smartphone. When a notification arrives, the device will display a popup at the bottom of the screen. For incoming calls, the caller's name will be displayed, and you can answer or reject the call. Smartphone notifications are applicable to iOS and Android. To enable this function, the iGPSPORT APP must be installed on your smartphone to connect to the device. For more details, see "Pairing Your Smartphone".

Note: Enabling smartphone notifications will increase battery consumption for both the device and smartphone due to continuous Bluetooth connection.

8. SETTINGS

Press [Menu button] on the home page to view its options.

8.1 SENSORS

The iGS630 can pair with sensors supporting ANT+ and Bluetooth protocols, including heart rate monitors, cadence sensors, speed sensors, power meters, smart trainers, and shifting systems. Compatibility with specific third-party sensors depends on actual connection status.

Sensors Pairing:

Ensure the sensor (heart rate monitor, cadence sensor, speed sensor, or third-party power meter) is correctly installed before pairing. For installation details, refer to its User Manual. It is recommended to check the ID of each sender to find the correct one in the list.

1. Go to Setting > Sensor > Add a Sensor, and press [Confirm button] on the device.
2. The device searches for sensors.

• Cadence sensor: Rotate the crank arms to wake up the sensor. A flashing red light indicates the sensor is enabled.
• Speed sensor: Rotate the wheel to wake up the sensor. A flashing red light indicates the sensor is enabled.
• Third-party power meter: Rotate the crank arms to wake up the sender.

3) When the sensor is found, its model number and ID will be displayed. Select the sensor to connect and press [Confirm button] to start pairing. 4) After successful pairing, the sensor will be in the sensor list.

Note: Ensure the sensor is awake before pairing. Paired sensors will automatically connect to the device if successfully paired.

Sensors Setting:

The sensor needs to be set for correct use and accurate measurement. The setting method is as follows: select a connected sensor, press [Confirm button] to open the menu, and select the data to set.

• Wheel Size: If pairing with a speed sensor, set the wheel size. Select the speed sensor, press [Confirm button], and select the wheel diameter to set the wheel size. Refer to the Appendix "Common Wheel Diameter Parameters" for the setting method.
• Crank Length: Set crank length in millimeters.
• Power Meter Calibration: First, rotate the crank arms to wake up the sensor; second, select "Power Calibration" in the menu; third, calibrate the power meter following the on-screen instructions.

Sensors Removing:

Select a saved sensor, press [Confirm button] to view its options. Select "Forget" to remove the sensor.

8.2 PAIR PHONE

Connect the device via Bluetooth. Once connected, you can use Bluetooth features like uploading activities to the iGPSPORT APP, smart notifications, security, and tracking. For a paired device, select "Unpair", press [Confirm button] to unbind it from the mobile phone. The device will restart after unbinding.

8.3 THEME

The device supports multiple theme colors. Select a theme according to your needs. Select "Theme" and press [Confirm button] to view its options. Select "Desktop Style" and press [Confirm button] to choose a style you like. Select "Theme Color" and press [Confirm button] to choose a color you like. Select "Dark Mode" and press [Confirm button] to view its options. Select a mode and press [Confirm button] to save and exit.

8.4 SAVE AND TRACKING

Tracking:

Allow friends and family to track your activities in real-time. Select "Tracking" and press [Confirm button] to open/close Tracking.

8.5 POWER MANAGEMENT

Battery Save Mode: Prolongs battery usage but may reduce accuracy of activity data. When enabled, the device changes GPS recording frequency and sensor data to extend usage time, improving battery efficiency for long tours or low battery situations. GPS in Battery Save Mode records locations and sensor data at a lower frequency. Note: When the activity timer is running, history recording is in Battery Save Mode.

Battery Save Mode Settings: Select "Power Manage" and press [Confirm button] to view options. Go to Settings > Power Manage > Battery Save Mode > On. Select "Wake up the screen when warning during the activity".

Note: Close Battery Save Mode and charge the device for a better experience.

Auto Sleep: Go to Setting > Battery Save > Auto Sleep. Press [Confirm button] to enable/disable this function.

Auto Power Off: Go to Settings > Battery Save Setting > Auto Power Off, and press [Confirm button] to enable/disable this function.

8.6 SYSTEM SETTING

Select "System Setting" and press [Confirm button] to view its options.

Language:

The device supports multiple languages. Select "Language" and press [Confirm button] to view its options. Press [Up/Down buttons] to select a language and press [Confirm button] to save and exit.

Backlight:

Select "Backlight" and press [Confirm button] to view its options. Select "Backlight>Brightness>Auto" and press [Confirm button] to turn on/off. If auto backlight is on, the device automatically adjusts backlight and colors based on ambient light. Select "Mode" and press [Confirm button] for dark mode. Select a mode and press [Confirm button] to save and exit. Select "Backlight Time" and press [Confirm button] to view options. Select a time and press [Confirm button] to save and exit. Select "Brightness" and press [Confirm button] to view options. Select a brightness and press [Confirm button] to save and exit.

GPS Mode:

The built-in GPS provides speed, distance, and elevation data for outdoor cycling. Besides GPS, other satellite navigation systems are available. Go to Settings > Battery Save > GPS Mode, and press [Confirm button] to enter. You can select GPS+Beidou, GPS+Beidou+GAL, GPS+GAL+GLONASS+QZSS, or GPS+GAL+Beidou+QZSS. The default setting is GPS+Beidou. Select a GPS mode and press [Confirm button] to save and exit.

Sounds:

Select "Key Tones" and press [Confirm button] to open/close it.

Time:

Select "Time" and press [Confirm button] to view its options. Select "Time Format" and press [Confirm button] to view its options. Press [Up/Down buttons] to select a time format (24-Hour/12-Hour) and press [Confirm button] to save and exit. Select "Time Zone" and press [Confirm button] to view its options. Press [Up/Down buttons] to select the former part of the time zone, and press [Confirm button] to save and exit. Press [Up/Down buttons] to select the latter part of the time zone and press [Confirm button] to save and exit.

Units:

Customize units for distance/speed, elevation, temperature, time format, and date format. Select "Distance" and press [Confirm button] to view options. Press [Up/Down buttons] to select a unit for distance and press [Confirm button] to save and exit. Select "Elevation/VAM" and press [Confirm button] to view options. Press [Up/Down buttons] to select a unit for elevation and press [Confirm button] to save and exit. Select "Temperature" and press [Confirm button] to view options. Press [Up/Down buttons] to select a unit for temperature and press [Confirm button] to save and exit.

Reset:

Select "Reset" and press [Confirm button] to view options. Selecting "Reset" restores default values and activity profiles, but history is not deleted. Selecting "Deleting All" restores default values and activity profiles and deletes history.

Note: Deleting all restores default values, unpairs Bluetooth, and clears data and odometer. It is recommended to enable auto-sync in the iGPSPORT APP (Device > Auto Sync) to save your personal data.

Device Setting:

If you encounter issues, try restarting the device. Restarting does not delete settings or personal data. Long press [power button] to turn off the device, and press [power button] again to restart it.

8.7 ABOUT THE DEVICE

Select "About" and press [Confirm button] to view its options. You can view device information such as serial number, software version, and copyright notice.

9. CYCLING DATA EXPORT

Turn off the computer and connect it to your computer's USB port using a USB data cable. Open the hard disk > iGPSPORT folder > Activities folder. Copy and export the Fit file from the Activities folder.

10. iGPSPORT APP

The iGPSPORT APP allows you to manage the device, view real-time visual interpretation of activity data, plan training and navigation routes, and communicate with other riders.

User Profile:

Precisely setting your physique (weight, height, date of birth, gender) is crucial for accurate measurement values like heart rate limits and calorie consumption. You can set weight, height, date of birth, gender, monthly training targets, maximum heart rate, resting heart rate, FTP, and other information in the User Profile. If you know your current maximum heart rate, set it. The default setting for maximum heart rate (220-age) is predicted by age.

Training Data:

The iGPSPORT APP provides easy access to past and planned cycling activity data. You can establish new training targets, get a quick overview of activities, analyze detailed summary data, chart records, and view real-time performance data. You can view your cycling activity records and statistical analysis of data during the activity, and compile statistics of your activity data over different time periods.

Cycling Computer Settings:

Conveniently set various device functions through the iGPSPORT APP, including adding, editing, and enabling data page views, and setting auto options and alerts. For more information, see "Activity Content in the iGPSPORT APP".

Activity Sharing:

The image sharing function of the iGPSPORT allows sharing images and training data on social media platforms like Facebook and Instagram. You can share an existing photo or take a new one and customize it with your training data. If you have a GPS record during training, you can also share a snapshot of the training route.

11. COMMON WHEEL SIZE SETTING

Setting the wheel size is a prerequisite for correctly displaying cycling information. There are two ways to determine your bicycle's wheel size:

Way 1

• Manually measure the wheels for the most accurate results.
• Mark the air faucet where the wheel touches the ground. Draw a line on the ground at this point. Move the bicycle forward a full circle on a flat surface, ensuring the tires are perpendicular to the ground. Draw another line at the air faucet to mark a complete rotation. Measure the distance between the two lines.
• Subtract 4mm to calculate the bicycle's weight and get the wheel's circumference.

Way 2

Look at the diameter (in inches or ETRTO) printed on the wheel. Match it to the wheel size in millimeters in the chart below. You can check online and calculate sizes not listed.

Common Wheel Diameter Parameters

12. CYCLING DATA

CONTACT US

Website: www.igpsport.com

Company: Wuhan Qiwu Technology Co., Ltd.

Address: 3/F Creative Workshop, No.04 District D Creative World, No.16 West Yezhihu Road, Hongshan District, Wuhan, Hubei, China.

Phone: 027-87835568

Email: service@igpsport.com

Disclaimer: This user manual is for user's reference only. If there is any difference between the device and the manual, please subject to the device. We will not notify otherwise.