CUBOT KINGKONG POWER 5 Quick Start Guide
Your essential guide to getting started with your new CUBOT KINGKONG POWER 5 rugged smartphone.
Device Overview
This section describes the physical layout and features of the CUBOT KINGKONG POWER 5.
Front View
The front of the device features:
- 1. Earpiece: For listening during calls.
- 2. Front Camera: For selfies and video calls.
- 3. Screen: The primary display area.
- 4. Volume Up Button: Increases audio volume.
- 5. Volume Down Button: Decreases audio volume.
- 6. Power Button: Turns the device on/off, locks/unlocks the screen.
- 7. Fingerprint Sensor: Integrated into the power button for secure unlocking.
Side View
The side of the device includes:
- 4. Volume Up Button
- 5. Volume Down Button
- 6. Power Button
- 11. SIM Card Tray: Houses the SIM card(s) and potentially a microSD card.
Rear View
The back of the device features:
- 12. Rear Camera: For taking photos and videos.
- 13. Flash: Provides illumination for the rear camera.
- 14. SOS Button: A dedicated button for emergency calls.
- 15. Speaker: Outputs audio for calls, media, and notifications.
- 16. NFC Module: Enables Near Field Communication for contactless payments and data transfer.
SIM Card Tray Insertion
To insert SIM and memory cards:
- Gently eject the SIM card tray using a SIM ejector tool.
- Place the Nano-SIM card(s) and/or microSD card into the tray in the correct orientation.
- Carefully reinsert the tray into the device.
Important Safety Information
Please read the following safety precautions carefully to ensure safe and proper use of your device.
General Safety
[!] General Warning: Always follow safety guidelines to prevent injury or damage to the device.
[!] Battery Safety:
- Do not attempt to disassemble, repair, or modify the battery.
- Do not puncture, crush, or expose the battery to fire or high temperatures.
- Avoid short-circuiting the battery terminals.
- If the battery leaks, avoid contact with skin or eyes. If contact occurs, rinse immediately with plenty of water and seek medical advice.
[!] Charging Safety:
- Use only the approved charger and USB cable provided with the device.
- Do not charge the device in extremely hot or cold environments.
- Ensure the charging port is clean and free of debris.
[!] Hearing Protection:
- Avoid listening at high volume levels for extended periods to prevent hearing damage.
[!] Driving Safety:
- When driving, use hands-free accessories to keep your hands on the wheel. Do not use your phone while driving if it distracts you.
[!] Medical Devices:
- If you use a pacemaker or other implanted medical device, consult your physician and the device manufacturer before using this mobile phone to ensure it does not interfere with the medical device. Maintain a safe distance between the mobile phone and your medical device.
[!] RF Exposure Information:
This device meets government requirements for exposure to radio waves. Specific Absorption Rate (SAR) information can be found in the device's settings or on the manufacturer's website.
[!] Disposal and Recycling:
- [!] Do Not Dispose in Household Waste: The symbol [!] Crossed-out Wheeled Bin indicates that this product should not be disposed of with regular household waste.
- Follow local regulations for the disposal and recycling of electronic equipment and batteries. The WEEE symbol [!] WEEE Symbol indicates compliance with regulations for waste electrical and electronic equipment.
[!] Operating Environment:
- This device is designed for operation within specific temperature ranges. Avoid exposing it to extreme heat or cold.
[!] Water and Dust Resistance:
The CUBOT KINGKONG POWER 5 is designed to be rugged and may have specific water and dust resistance ratings (e.g., IP68, IP69K). Ensure all ports are sealed and covers are properly closed before exposing the device to water or dust. Refer to the full manual for detailed specifications.
[!] Regulatory Compliance:
- [CE Symbol]: Indicates conformity with European health, safety, and environmental protection standards.
- [UKCA Symbol]: Indicates conformity with UK conformity assessment requirements.
- [FCC Symbol]: Indicates compliance with Federal Communications Commission regulations for radio frequency emissions.
Getting Started
Follow these steps to begin using your CUBOT KINGKONG POWER 5:
- Charge the Battery: Connect the provided USB Type-C cable to the device and a power adapter, then plug into a wall outlet. Allow the device to charge fully before first use.
- Power On: Press and hold the Power Button (6) until the CUBOT logo appears on the screen.
- Initial Setup: Follow the on-screen prompts to select your language, connect to Wi-Fi, sign in to your accounts, and configure basic settings.