Product: ME42 HEADPHONES
Operation Instructions
Wireless Operation
- Power On: Push the button forward.
- Power Off: Push the button down.
- Previous Song / Volume Down: In Wireless mode, Short Press for previous song; Long Press for volume down.
- Next Song / Volume Up: In Wireless mode, Short Press for next song; Long Press for volume up.
- Call Handling / Playback:
- When the connection is successful, for an incoming call: Short press the button to answer, long press to reject.
- Double-click to dial back the last number.
- Short press to play or pause music.
Indicator Light
- Wireless Mode: Red and blue lights flash in pairing mode. Blue light flashes slowly after successful pairing.
- Charging Mode: The red light is on continuously while charging. The red light turns off after charging is complete.
Wireless Pairing and Connection
To power on, push the button forward. The product enters pairing mode, indicated by red and blue lights flashing. On your mobile phone, search for wireless products. The product's Bluetooth name is "Tommy Headphones ME42". Connect to this name. If prompted for a password, enter "0000". Once the wireless connection is successful, the blue light will flash slowly. You can then use your mobile phone's music player to control music playback, including volume and track selection.
Line External Audio Input
When the product is powered on, insert an audio cable into the AUX/LINE IN port. This mode supports audio input from mobile phones, MP4 players, MP3 players, CD players, laptops, and other external audio devices.
Specifications
- USB Charging: DC 5V IN
- Wireless Frequency: 2402-2.480GHz
- Wireless Distance: 10 meters
- Frequency Response: 20Hz-20kHz
- Output Power: 35mW
- Signal to Noise Ratio: 88dB
- Charging Time: 2 hours
Remarks: If the headset cannot be turned on, please charge the headset before use.
Warranty Information
Sound Architects offers a two-year warranty for its electronics products. If a product is faulty, not fit for purpose, or does not function as advertised, the consumer has the right to repair, replacement, price reduction, or reimbursement. Note: National regulations may provide for longer warranty periods or different consumer rights, which Sound Architects will adhere to.
Warranty Exclusions
- Products purchased from unauthorized sellers.
- Physical or water damage caused by improper use.
- Free or promotional products.
Initiating a Warranty Claim
To initiate a warranty claim, please contact Sound Architects at service@soundarchitects.com or visit the Contact Us page on soundarchitects.com. Please provide the following information:
- Your Name
- Product Name
- Date of Purchase
- Place of Purchase
Sound Architects aims to respond to all emails within 24 hours.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
