LG Initial Setup Guide

Unboxing and Initial Preparation

⚠ Important Safety Information:

• Do not touch the screen directly.
• Do not lay the TV flat on a hard surface.
• Do not lift the TV by the screen.

Included Components

Ensure all components are present:

• Screws: 6 pieces (M5 x L30)
• Other accessories (not explicitly shown but implied: remote control, power cable, etc.)

TV Stand Assembly (Steps 1-3)

1. Carefully lay the TV face down on a soft, flat surface (e.g., a blanket or foam packaging) to protect the screen.
2. Attach the stand components to the TV, securing them with the provided screws.
3. With assistance, carefully lift the TV and place it upright on a stable, flat surface such as a table.

✔ Read Safety and Reference. (English)

Прочтите Руководство по технике безопасности. (Русский)

Прочитайте "Правила безпеки та довідкова інформація". (Українська)

Қауіпсіздік нұсқаулығын оқыңыз. (Қазақша)

Xavfsizlik bo'yicha ko'rsatmalar va havolalar'ni o'qib chiqing. (O'zbekcha)

Аюулгүй ажиллагааны зааварчилгааг уншина уу. (Монгол)

+: Depending on model / В зависимости от модели / Залежно від моделі / Үлгіге байланысты / Rusumiga qarab / Загвараас хамаарна

TV Setup and Mounting

Wall Mount Preparation (Steps 1-3)

1. Remove any existing screws from the back of the TV where the wall mount will attach.
2. Attach the wall mount brackets to the designated screw holes on the back of the TV.
3. Attach the wall mount adapter to the TV, ensuring it is securely fastened.

Stand Assembly (Steps 4-A & 4-B)

For 70UP77* models (4-A):

1. Attach the stand base to the TV, ensuring it clicks into place or is secured with screws.

For 75UP77* models (4-B):

1. Attach the stand base to the TV, ensuring it clicks into place or is secured with screws.

Wall Mounting (Steps 5-A & 5-B)

For 70UP77* models (5-A):

1. Carefully lift the TV and attach it to the pre-installed wall mount bracket on the wall. Ensure it is securely locked in place.

For 75UP77* models (5-B):

1. Carefully lift the TV and attach it to the pre-installed wall mount bracket on the wall. Ensure it is securely locked in place.

Connecting Devices

Available Ports:

• OPTICAL DIGITAL AUDIO OUT: For connecting external audio devices via optical cable.
• ANTENNA/CABLE IN: For connecting an antenna or cable TV signal.
• LAN: For wired network connection.
• SATELLITE IN: For connecting a satellite dish.
• HDMI IN (eARC/ARC): For connecting HDMI devices. The eARC/ARC port supports enhanced audio return channel.
• USB IN: For connecting USB storage devices.

Cable Management

Use the provided cable management clips to organize and secure cables at the back of the TV.

Remote Control and Power

Magic Remote Pairing

To pair the Magic Remote with your TV, press and hold the Back and Home buttons simultaneously for approximately 5 seconds until the remote indicator flashes.

Power On

Press the power button on the remote control or the TV to turn on the television.

Product Specifications

Power Requirements

AC 100-240 V~50/60 Hz

• Требования к электропитанию (Russian)
• Вимоги до електроживлення (Ukrainian)
• Электртұтыну шарттары (Kazakh)