IQOS ILUMA ONE User Guide
Product Overview
This guide provides instructions for the IQOS ILUMA ONE™ device.
Key Components:
- Cap
- Button
- Charging Port
- Charging Cable
- Power Adaptor
IQOS ILUMA™ is compatible only with SMARTCORE STICKS™.
Support and Services
For information on customer support and additional services for IQOS users, please visit www.iqos.com/services.
Features and Settings
You can modify your IQOS experience according to your preferences with the IQOS App*.
Please register by scanning a QR code or log in on www.iqos.com/iluma and follow the instructions.
*IQOS app may not be available in your country.
Getting Started
Turn On
Press and hold the Button for 4 seconds, then release. Status Lights will turn on slowly.
Charge
Before first use, fully charge your IQOS ILUMA ONE™ with the Power Adaptor and Charging Cable. This takes approximately 90 minutes.
How to Use
Open
Slide to open the device.
1. Insert SMARTCORE STICK™
Insert the SMARTCORE STICK™ into the device up to the line on the filter, with the filter facing outside.
2. Start Heating
Press the Button for at least 1 second until IQOS ILUMA ONE™ vibrates and the Status Light(s) pulse(s). Keep the SMARTCORE STICK™ in position during preheating.
3. Begin Use
Start using once IQOS ILUMA ONE™ vibrates and the Status Light(s) stay fixed.
Experience Countdown
During use, the Status Light(s) indicate the remaining time.
4. Nearly Complete
To signal the last 30 seconds or last 2 puffs, IQOS ILUMA ONE™ will vibrate with one light pulsing white.
5. Remove SMARTCORE STICK™
Remove the used SMARTCORE STICK™ and dispose of it according to Safety Warnings and Instructions.
6. Close
Slide to close the device.
Quick Tips & Status Lights
Battery Status
Short press the Button. Status Lights will turn on to indicate the battery level. (Example: 4 lights indicate fully charged).
Light Blinks Yellow
Battery depleted, needs to charge.
Autostop
During use, the experience will stop if the specifically designed tobacco stick is moved or removed from the device.
Lights Blink White Twice
IQOS ILUMA ONE™ is outside the operating temperature range (0°C to 40°C).
Light Blinks Red
Reset IQOS ILUMA ONE™. If red light blinking persists, contact Customer Care.
To Reset
Press the Button for 10 seconds, then release. All Status Lights will turn OFF, and then turn ON, to confirm a RESET.