Fantech Helios XD3v2 Pro Wireless RGB Gaming Mouse

What’s included in the box

• Helios XD3v2
• Type-C charging cable
• USB receiver
• User manual
• 1 set PTFE mouse skates
• USB adaptor

System requirements

• Operating systems: Windows XP/7/8/10; MAC OS
• USB 2.0/3.0 port

Product Overview

Thank you for purchasing the FANTECH HELIOS XD3v2 Pro Wireless RGB Gaming Mouse. The FANTECH HELIOS XD3v2 features 80 million switches and on-board memory to save up to hundreds of different profiles. It is a plug-and-play USB interface programmable mouse, requiring no driver installation for first use. For enhanced settings and functions, download the software from www.fantechworld.com.

Technical Specifications

• Pixart 3370 Gaming Optical Sensor
• 1000Hz Polling Rate
• On-the-fly Adjustable DPI (400-19000)
• Up to 400IPS/50g acceleration
• Kailh GM8.0, 80 million clicks
• Battery capacity: 730mAh
• Battery life: up to 70 hours
• Charging time: Approx 2 hours
• Size: 120mm*58mm*38mm
• 1.8m Type-C paracord
• Weight: 83gr

How to Connect

It's plug and play. Connect the mouse to your computer by inserting the USB receiver into your computer's USB port.

How to Use

Power switch: Easily switch the mouse ON or OFF, or switch to ECO for battery saving mode.

Wired mode: To activate wired mode, simply disconnect the wireless receiver and connect the USB cable to the mouse.

Low Battery Indicator: If the LED on the scroll wheel blinks red, it indicates low battery. Connect the USB to charge the mouse.

Note: To use the mouse with RGB lighting, be sure to connect the cable while the mouse is switched ON.

Key Function Map

1. Left Button
2. Middle Button
3. Right Button
4. Forward
5. Backward
6. DPI
7. Power Switch
8. USB Receiver

Software Features

Lighting Setup

• Customize up to 7 different Spectrum modes: Steady, Breathing, Streaming, Neon, Scrolling, Colourful Breathing, LED OFF.
• Some spectrum modes can be customized, such as brightness and speed.
• Set Auto-Sleep time from 10 seconds to 40 minutes.

Advanced Settings

• Customize mouse sensitivity, scrolling speed, and double-click speed.
• Choose mouse LOD (Lift-Off Distance) between 1mm to 2mm.
• 6 Stages DPI customization from 50-19000DPI.
• Set debounce time from 0-30ms.

Macro Setup

• To create a new macro:
  1. Press the "New Macro" bar.
  2. Input the "Macro Name".
  3. Click "Start recording" to begin recording and click "Stop record" to stop. The macro key (Delay/cycle time can be edited/modified).
  4. After clicking "Stop record", click "save" to save the macro key.
• To use a macro:
  1. Select the desired button.
  2. Select macro and choose the "MACRO NAME".
  3. Click "OK".

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.