Fantech HIVE UX2 Ultimate Macro RGB Gaming Mouse
Instruction Manual
Introduction
Thank you for purchasing the Fantech HIVE UX2 Ultimate Macro RGB Gaming Mouse. The Fantech HIVE UX2 features 50 million click switches and on-board memory to save hundreds of different profiles. It is a plug-and-play USB interface programmable mouse, requiring no driver installation for initial use. For enhanced settings and functions, software can be downloaded from www.fantechworld.com.
What's Included
- FANTECH HIVE UX2 Ultimate Macro RGB Gaming Mouse
- 1 set mouse skates
- User manual
System Requirements
- Operating systems: Windows XP/7/8/10; MAC OS
- USB 2.0/3.0 port
Technical Specifications
- Sensor: Pixart 3360 Gaming Sensor
- Tracking Speed: Up to 250 ips
- Acceleration: 50g
- Adjustable DPI: 400-12000 DPI (On-the-fly)
- Polling Rate: 1000 Hz
- Switch Lifespan: 50,000,000 Clicks
- Lighting: RGB 16.8 Million Customizable Color Options
- Buttons: Six Independently Programmable Buttons
- Cable: 1.6m Paracord USB Cable
- Dimensions: 125mm (Length) x 64mm (Width) x 39mm (Height)
How to Connect
This mouse is plug-and-play. Connect the mouse to your computer by inserting the USB jack into a USB port.
[Diagram: A USB connector is shown plugging into a computer's USB port.]
Keys Function Map
[Image Description: Top-down view of the Fantech HIVE UX2 mouse with numbered buttons indicating their functions.]
- 1: LEFT BUTTON
- 2: MID BUTTON
- 3: RIGHT BUTTON
- 4: FORWARD
- 5: BACK
- 6: DPI SWITCH
Software Features
The Fantech software allows for advanced customization of your HIVE UX2 mouse.
Basic Setup
- Assign up to 6 macro buttons.
- Customize DPI settings across 7 stages, ranging from 100 to 12000 DPI.
Lighting Setup
Customize up to 7 different lighting effects, including: Colorful Streaming, Steady, Breathing, Neon, Colorful Steady, Flicker, and LED OFF.
Mouse Parameter
Adjust mouse sensitivity, scrolling speed, and double-click speed.
Polling Rate
Select from 4 polling rate options: 125Hz, 250Hz, 500Hz, and 1000Hz.
Macro Editor
Create and assign custom macros to your mouse buttons:
- Click the "Macro Editor" bar.
- Click the "New macro" bar.
- Enter a "Macro Name" and click "OK".
- Click "Start record" to begin recording. Click "Stop record" to finish (delay/cycle times can be edited). The macro will save automatically.
To use a macro:
- Select the desired button.
- Choose "Macro" and select the recorded "MACRO NAME".
- Click "OK".
