NANLITE Compac 24 LED Studio Light User Manual

Product Show

This section presents the Compac 24 LED Studio Light.

Technical Data

A line drawing shows the rectangular LED panel of the Compac 24 light, featuring a mounting bracket at the bottom.

• LED Quantity: 120pcs
• Voltage: AC 100V-240V
• LED Power: 24W
• Color Temperature: 5600K
• CRI(Ra): 95

Product Details

A diagram of the rear of the Compac 24 light shows the control panel with labeled components:

1. Dimmer knob: For adjusting the brightness.

2. Power switch: Turn on/off the fixture.

3. Bracket fixing knob: For connecting the fixture with the light stand.

4. AC power socket: AC power input port.

5. Angle fixing knob: For adjusting the illumination direction of fixture.

Usage

1. Install the fixture on the light stand, then adjust it to the desired position.
2. Switch off the power, then connect to AC 100-240V power.
3. Press the power switch to turn on the fixture.
4. Rotate the "Dimmer knob" to adjust the brightness.
5. Turn off the fixture and unplug the power cord when stop using the light.

Security Warning Info

1. Please open the package to check if it is damaged from transportation after receiving the light. In case of damage caused by transportation, please do not use this light and contact the dealer as soon as possible.
2. Do not use a power cord if damaged insulation. Do not unplug hard or drag the power cord directly.
3. Make sure that the power supply voltage used matches the voltage specified by the light before installation.
4. When not using or cleaning the light, please turn it off.
5. Keep the light safely stored and away from children.

Notice

1. Before using, please read the instruction sheet carefully and then install the product according to the instruction sheet.
2. The product should be operated within the normal voltage.
3. When pulling the plug, please do not use too much force. Do not touch the connection by wet hand.
4. Please keep this product in a dry and ventilated place to avoid the circuit getting wet and causing a short circuit.
5. When stop using, please turn off the power to preserve the life of the LEDs.

What's in the box?

Please check the contents:

• Compac 24 LED Studio Light x 1 (Described as a rectangular LED panel light)
• Power Cord x 1 (Described as a power cord with a plug)
• User Manual x 1 (Described as a booklet labeled 'User Manual')

Troubleshooting List

If the failure is not solved after the above troubleshooting procedures, please contact the dealer or manufacturer for repair.

The instruction was written according to the strict production test of our company. If there are any changes related to the design of the product later, we will not keep you updated for that.

Contact Information

Version: V1 2019-10-22

NANLITE
Phone: +86-754-85751187
Email: service@nanlite.com
Phone: +86-754-85300887
Address: Zhanglin, 324, Dongli Chenghai Shantou Guangdong China
Website: www.nanlite.com