Nanlite Forza 300B II LED Bi-Color Spot Light User Manual
Manufacturer: Guangdong NanGuang Photo&Video Systems Co., Ltd.
Product Diagram
The Forza 300B II consists of a Fixture Body and a Control Unit. Key components are:
- Fixture Body: Handle (1), Input Socket (2), Reflector (3), Umbrella Hole (4), Adjustable Handle (5), Yoke (6), Lock Catch (7).
- Control Unit: Output Socket (8), DMX OUT (9), AC Power Input Socket (10), Power Switch (11), DMX IN (12), USB Port (13), Control Panel (14), Battery Holder (15), Handle (16), Quick Release Plate (17).
Technical Data
- Rated Power: 350W
- Input: DC(Battery)14.4V-14.8V/12A, AC100-240V 50/60Hz
- Color Temperature: 2700K - 6500K (GM±80)
- CRI: Average 96
- TLCI: Average 97
Product Details
Detailed descriptions of the numbered components:
- Fixture Body Handle (1): For gripping and adjusting illumination direction.
- Fixture Body Input Socket (2): Connects to the control unit via a DC cable.
- Reflector (3): Concentrates light for improved central illumination.
- Umbrella Hole (4): For mounting an umbrella.
- Adjustable Handle (5): Tightens or releases the fixture's tilt movement on the yoke.
- Yoke (6): Connects the fixture to a light stand and allows direction adjustment.
- Lock Catch (7): Locks or releases the reflector or other accessories.
- Control Unit Output Socket (8): Connects to the fixture body via a DC cable.
- DMX OUT (9): DMX signal output interface.
- AC Power Input Socket (10): For connecting the AC cable.
- Power Switch (11): Turns the fixture on/off.
- DMX IN (12): DMX signal input interface.
- USB Port (13): For firmware updates.
- Control Panel (14): Displays function operations and data.
- Battery Holder (15): Mounts 14.4-14.8V/12A V-mount batteries.
- Control Unit Handle (16): For lifting the control unit.
- Quick Release Plate (17): Mounts to a quick release clamp.
Usage
1. Connection Between Light Fixture, Control Unit and Power Supply
Connect the fixture body to the control unit using the DC connecting cable. Ensure power voltage matches the control unit's specifications. Use the provided AC power cable for AC power input.
2. Connection Between Light Fixture and Control Unit with Battery
The unit can be powered by 14.4-14.8V V-mount batteries. When using two batteries, maximum output is 100%. With one battery, maximum output is 45%. Do not use 26V batteries. Batteries are sold separately.
3. Installation and Detachment of Quick Release Clamp
Mount the clamp on a light stand by rotating the adjustable handle to tighten. Align the control unit's quick release plate with the clamp's mount to attach. Press the lock catch on the clamp to detach the control unit.
4. Installation and Detachment of Reflector
To install, align the reflector with the fixture's Bowens mount and rotate until it clicks. To remove, push and hold the lock catch while rotating the reflector.
Remote Control
The Forza 300B II supports 2.4G remote control, DMX/RDM control, and has a built-in Bluetooth module. ADDRESS settings are required for 2.4G and DMX/RDM operation.
1. ADDRESS/DMX Settings
Navigate the menu using the left and right knobs to access ADDRESS/DMX options. You can set ADDRESS (1-512), DMX MODE (CCT 8bit, ULTIMATE DMX 8bit), DMX REDUCED CHANNELS (ON/OFF), DMX DIMMING CURVE (LINEAR, EXPONENT, LOGARITHM, S CURVE, GAMMA 2.2), and DMX SMOOTHING (ON/OFF).
2. DMX Control
Connect fixtures to DMX/RDM consoles using a 5-pin shielded cable (minimum 0.3mm diameter). Pin 1 is GND, Pin 2 is DATA-, Pin 3 is DATA+. Pins 4 and 5 are N/C. A DMX terminator (120 Ohm resistor across Pin 2 and 3) is recommended for the last fixture in a chain to prevent signal interference. The fixture supports DMX512 (1990) control signals. A 3-pin XLR to 5-pin XLR conversion guide is provided.
The DMX Reference Guide, downloadable from www.nanlite.com, provides detailed information.
3. 2.4G Remote Control
Remote control is available via a 2.4G remote controller or the NANLINK APP (with WS-TB-1 transmitter box). Bluetooth connectivity is also supported. The fixture supports 2.4G wireless protocol V1.0 and V2.0. Set the protocol to V2.0 for WS-RC-C1/C2 controllers, or V1.0 for other controllers. Bluetooth can be reset via the menu.
4. RDM Control
Connect to consoles with RDM function using the same method as DMX. Control the fixture via the RDM console. The fixture's UID format is 0008 XXXX XXXX 020CForza 300B II, Manufacturer: Nanguang.
Operating Instructions
1. Power On and Initial Display
Ensure the power switch is off before connecting power or batteries. Turn the unit on; the screen will display "NANLITE". The control panel shows Mode, Brightness (DIM), CCT, G/M, Address, Lock Status, and Fan State.
2. CCT Mode
Press the CCT button to enter CCT mode. Use the right knob to select DIM, CCT, or G/M. Use the left knob to adjust the selected parameter. DIM ranges from 0%-100%, CCT from 2700K-6500K, and G/M from -80 to +80. Pressing the left knob toggles the fixture on/off.
3. EFFECT Mode
Press the EFFECT button to enter EFFECT MODE. The Forza 300B II includes effects like CCT LOOP, INT LOOP, FLASH, PULSE, STORM AUTO, STORM MANUAL, TV, PAPARAZZI, CANDLE/FIRE, BAD BULB, FIREWORK, EXPLOSION AUTO, EXPLOSION MANUAL, and WELDING. For each effect, use the right knob to select parameters (e.g., DIM, CCT, G/M, SPEED, INTERVALS, FLASH RATIO, DECAY, PAUSE) and the left knob to adjust their values. Specific parameter ranges are provided for each effect.
4. MENU Button
Press the MENU button to access the main menu. Options include OUTPUT MODE (MAX OUTPUT, CONSTANT OUTPUT), ADDRESS/DMX (detailed on P10), WIRELESS CONTROL (detailed on P18), FAN CONTROL (SMART, FULL SPEED, LOW SPEED, OFF), ROTATE SCREEN (YES/NO), SCREEN BRIGHTNESS (1-10), BUTTON BACKLIGHT (ON/OFF), LANGUAGE (ENGLISH, [other language symbol]), FIRMWARE UPDATE, and VERSION.
Fan Control Notes: Fan OFF limits output to 15%. LOW SPEED limits output to 50%. SMART or FULL SPEED allows 100% output.
5. LOCK Button
Press and hold the LOCK button to lock/unlock current settings, preventing accidental changes.
6. Power Off
Turn off the power switch when the fixture is not in use.
Safety Precautions
- Check for damage after unpacking; do not use if damaged.
- Do not use damaged power cables; avoid pulling cables.
- Ensure power supply voltage matches fixture specifications.
- Turn off the fixture when not in use or before cleaning.
- Store safely away from children.
Notice
- Remove the COB protective cap before use.
- Do not look directly at the emitter when the fixture is on.
- Keep away from flammables and explosives.
- Do not place objects on the fixture or allow liquids inside.
- Avoid using strong detergents for cleaning; use a cloth with neutral cleanser.
- Operate in a dry, well-ventilated place; avoid humid, dusty, or overheated environments. Ensure fans and vents are clear.
- Do not disassemble for self-repair; maintenance should be done by qualified professionals.
- Do not cover vents during use to ensure proper heat dissipation. Be cautious of high surface temperatures.
General Fault Detection and Diagnosis
| Fault | Diagnosis |
|---|---|
| Light won't boot up properly. | 1. Check power supply and cable connections are secure. 2. Verify voltage is within the specified range. |
| Fixture operates manually, but DMX control fails. | 1. Confirm DMX address setting is correct. 2. Check DMX signal cable for correct connection and damage. |
| Display screen is on, but fixture is unresponsive. | Check if the screen shows a lock symbol. Press and hold the "LOCK" button for 2 seconds to unlock. |
| Fan does not work. | 1. Check if the fan setting is OFF. 2. If "Fan abnormal" is displayed, contact the supplier or manufacturer. |
If issues persist after troubleshooting, contact the place of purchase.
What's in the box?
- Forza 300B II x 1
- Control Unit x 1
- AC Power Cable x 1
- DC Connection Cable x 1
- Quick Release Clamp x 1
- COB Protective Cap x 1
- Carrying Bag x 1
- Reflector x 1
- DMX Reference Guide x 1
- User Manual x 1
NANLITE
